Unable to write to USIM

Anmeldedatum: 27.04.2009 Beiträge: 5

Hi all,

Small issue when trying to use MFE to write or copy contacts from phone memory to the USIM card it produces an error.

I also tried writing to the USIM using a card reader but that also came up with an error 'SIM locked'

Allows you to create in MFE but when you sync you get error message;

In the phones (K800i) security settings I have disabled USIM PIN protection so PIN1 is greyed out however PIN2 is still active and does need a password which I have entered but still cant disable it.

I copied this from the card reader web site which would explain the problem in part

"The reason SIM Manager asks it is because you attempt to write to the FDN section - fixed dialling numbers. To write to that section you need PIN2."

Any advice on how to disable greatly appreciated.

David[img][/img][img][/img]

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 32025 Wohnort: Tirol

I don't think it has todo with the PIN-Codes. The K800i and the most newer phones have a buggy SIM-Interface implementation. I also had this problems on my K800i. You can try it with another (older) phone if you want.

Basicly its not recommened to use still the SIM-Storage. The fields are very limited. If you want to make a backup of your contacts on the SIM then you can do this inside the phone.

Anmeldedatum: 27.04.2009 Beiträge: 5

Thanks for the reply FJ,

I have tried the SIM card reader on just the SIM (no phone) which says its locked so possibly could be the PIN2?

I will try another reader which I have just ordered and post the result.

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 32025 Wohnort: Tirol

The SIM-Phonebook is not locked by any PIN. f.e. the fixed dialing numbers (Storag FD) is protected by SIM. Maybe if you post the logfile after the errormessage then i can tell you the reason for the error.

Anmeldedatum: 27.04.2009 Beiträge: 5

Here we go FJ, many thanks - David

14:25:09.15 [TX]: AT*EBCA=1
14:25:16.17 [TX]: AT*EBCA=1
14:25:23.19 [TX]: AT*EBCA=1
14:25:35.50 Settimeout: RT=1500 WT=800
14:25:35.50 [TX]: AT+CBC
14:25:37.01 Port 4 wird geschlossen
14:25:37.12 Port wurde geschlossen
14:25:44.50 Avaiable Ports: COM3=\Device\SmSrl; COM4=\Device\s116mdm0; COM5=\Device\s116mdm1; COM6=\Device\s116obex0; COM7=\Device\s116mgmt0;
14:25:44.50 Neue COM-Bibliothek wird verwendet
14:25:44.50 SPort Properties set, opening Port...
14:25:44.53 After OpenPort
14:25:44.53 Settimeout: RT=2000 WT=200
14:25:45.05 Port 4 wurde geöffnet !
14:25:45.05 [TX]: AT+CGSN
14:25:45.11 [RX]: AT+CGSN

14:25:45.11 [RX]: 353427011057674
14:25:45.14 [RX]: OK
14:25:45.14 Settimeout: RT=15000 WT=1000
14:25:45.14 [TX]: ATI
14:25:45.19 [RX]: ATI

14:25:45.19 [RX]: Sony Ericsson K800
14:25:45.20 [RX]: OK
14:25:45.20 [TX]: AT+CSCS="UTF-8"
14:25:45.27 [RX]: AT+CSCS="UTF-8"

14:25:45.27 [RX]: OK
14:25:45.27 [TX]: ATI3
14:25:45.33 [RX]: ATI3

14:25:45.33 [RX]: Sony Ericsson Device 039 USB WMC Modem
14:25:45.34 [RX]: OK
14:25:45.34 [TX]: AT+CNMI=2,1,0,1
14:25:45.38 [RX]: AT+CNMI=2,1,0,1

14:25:45.38 [RX]: OK
14:25:45.38 [TX]: AT*ECAM=1
14:25:45.44 [RX]: AT*ECAM=1

14:25:45.44 [RX]: OK
14:25:45.44 [TX]: AT+CBC
14:25:45.50 [RX]: AT+CBC

14:25:45.50 [RX]: +CBC: 1, 44
14:25:45.52 [RX]: OK
14:25:45.52 [TX]: AT+CSQ
14:25:45.58 [RX]: AT+CSQ

14:25:45.58 [RX]: +CSQ: 142,72
14:25:45.59 [RX]: OK
14:25:45.59 Alle Verbindungsaktionen beendet
14:25:45.59 Suche Memorystick: C:\ D:\ E:\ F:\ G:\ H:\
14:25:45.59 Suche abgeschlossen:
14:25:45.66 [TX]: AT*ECAM=0
14:25:45.73 [RX]: AT*ECAM=0

14:25:45.73 [RX]: OK
14:25:45.73 [TX]: AT+CPBS="SM"
14:25:45.83 [RX]: AT+CPBS="SM"

14:25:45.83 [RX]: OK
14:25:45.83 [TX]: AT+CPBW=,"09809944784",129,"paul jake"
14:25:45.92 [RX]: AT+CPBW=,"09809944784",129,"paul jake"

14:25:45.92 [RX]: ERROR
14:25:45.92 ErrMsg: SIM entry: paul jake creation failed!
14:25:46.60 fSync_Timer3: Form.Visible=True
14:25:47.48 [TX]: AT+CSCA?
14:25:47.58 [RX]: AT+CSCA?

14:25:47.58 [RX]: +CSCA: "+447782000800",145
14:25:47.58 [RX]: OK
14:25:47.58 [TX]: AT+CPBS="SM"
14:25:47.66 [RX]: AT+CPBS="SM"

14:25:47.66 [RX]: OK
14:25:47.66 [TX]: AT+CPBR=?
14:25:47.72 [RX]: AT+CPBR=?

14:25:47.72 [RX]: +CPBR: (1-0),80,0
14:25:47.75 [RX]: OK
14:25:47.75 [TX]: AT+CPBR=1,150
14:25:47.84 [RX]: AT+CPBR=1,150

14:25:47.84 [RX]: ERROR
14:25:47.84 ErrMsg: The phonebook on the SIM card could not be downloaded!
14:25:49.04 [TX]: AT*ECAM=1
14:25:49.12 [RX]: AT*ECAM=1

14:25:49.12 [RX]: OK

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 32025 Wohnort: Tirol

Code:

14:25:45.83 [TX]: AT+CPBW=,"09809944784",129,"paul jake"
14:25:45.92 [RX]: AT+CPBW=,"09809944784",129,"paul jake"
14:25:45.92 [RX]: ERROR

The phone just answers with ERROR but without errorcode. In this case i don't know whats the reason for this failure.

Anmeldedatum: 27.04.2009 Beiträge: 5

Thaks for trying FJ, any way I can disable PIN2 to try and see if it makes a difference?

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 32025 Wohnort: Tirol

As far as i know there is no way to disable PIN2, but i still don't think that it has to do with the PIN-Lock.

Anmeldedatum: 27.04.2009 Beiträge: 5

Thanks again FJ for your help,

I dont seem to be having much like with mobiles or cordless, just received my third replacement set of Motorola D802's which are supposed to be renowned for their sound quality - not mine though, loud hissing in the earpiece driving me nuts - cant send them back again as they keep saying the ones returned are ok?

Ahh well, lesson learned dont buy Motorola Sad

Informationen zum Datenschutz auf dieser Website