FJ Software

Myphoneexplorer crashes in Windows Vista 64bit whether I try to connect via WiFi or USB. In WiFi, it sees the phone, but crashes right after I enter the PIN. In USB, it crashes almost immediately. In both cases, it crashes when 'Initializing Connection'.

The phone (SCHI535, Samsung Galaxy S3) is set for USB debugging, and when I connect the phone, it does appear to install the ADB Drivers. On the phone MPE client, both USB and WiFi are active and waiting.

I have tried "Run as Administrator" and excluding myphoneexplorer.exe from DEP, but that makes no difference.

It looks like MPE is exactly what I need, but what can I do from here?

I have the same problem, but I am running WinXP Pro, SP3. I, too, have USB debugging enabled and have installed the adb.exe file as well as the latest SGSIII drivers from Verizon. Unlike my Samsung Fascinate, I only have two choices when connecting my phone to my laptop via USB: "Connect as Media device (MTP)" or as "Camera (PTP)"; I always choose Media device.

Just purchased my SGSIII and have been trying to sync Thunderbird with my new SGSIII via USB and Wi-fi for past 3 days. When connecting via USB, MPE crashes (i.e., 'MPE has stopped responding and Windows wishes to send a report to Microsoft') immediately when 'initializing connection'. Tried connecting via Wi-Fi, enter PIN, then phone shows phone is connected via Wi-Fi, but MPE shows a connection could not be made, then crashes.

I have had previous success the past 2 years with MPE and my Samsung Galaxy S Fascinate by Verizon.

What is the fix?!! Thanks.

Here's the Debug Log for a crashed WiFi connection. Looks like communication with the phone does get established, but then some AT commands error out? Can someone take a look at this?

Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.2
Datum: 7/10/2012

09:49:21.32 Setting Port: 999
09:49:21.32 Setting Baud: 115200
09:49:21.32 Avaiable Ports: COM4=\??\Root#PORTS#0000#{86e0d1e0-8089-11d0-9ce4-08003e301f73}; COM5=\??\Root#PORTS#0001#{86e0d1e0-8089-11d0-9ce4-08003e301f73};
09:49:21.32 Main Load frmSplash
09:49:21.33 Load frmSplash...
09:49:21.33 Show splash...
09:49:21.35 frmSplash geladen
09:49:22.10 Hauptfenster wird geladen
09:49:22.32 Sidebar fertig geladen
09:49:22.36 UC SMS wird geladen
09:49:22.42 UC Phonebook wird geladen
09:49:22.47 UC Phonebook fertig geladen
09:49:22.47 UC Calls wird geladen
09:49:22.53 UC Organizer wird geladen
09:49:22.62 Organizer initiated
09:49:22.64 Startpage=1
09:49:22.65 UC Filebrowser wird geladen
09:49:22.70 UC Filebrowser fertig geladen
09:49:22.70 UC AppBrowser wird geladen
09:49:22.71 UC Notes wird geladen
09:49:22.72 UC Calls wird geladen
09:49:22.76 Setting Lastuser:
09:49:22.77 Lade Userdatenbank:
09:49:22.80 Kontakte geladen
09:49:22.82 Anrufe geladen
09:49:22.82 Organizer geladen
09:49:22.82 Notizen geladen
09:49:22.82 SMS geladen
09:49:23.08 Hauptfenster fertig geladen
09:49:23.54 Downloader: RC=6 BytesMax=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
09:49:25.76 Refresh ComDescriptions...
09:49:25.84 PORT: COM4 Enumerator=ROOT Displayed=RIM Virtual Serial Port v2 InstanceID=ROOT\PORTS\0000
09:49:25.84 PORT: COM5 Enumerator=ROOT Displayed=RIM Virtual Serial Port v2 InstanceID=ROOT\PORTS\0001
09:49:25.93 MODEM: COM4 Enumerator=ROOT Displayed=Standard Modem FriendlyName=Standard Modem InstanceID=ROOT\MODEM\0000
09:49:25.93 MODEM: COM4 Enumerator=ROOT Displayed=PdaNet Modem FriendlyName=PdaNet Modem InstanceID=ROOT\PNETMDM\0000
09:49:26.51 StickyNotesPath=C:\Windows\Sysnative\StikyNot.exe FileExists=False
09:49:36.64 OK pressed in settingswindow
09:49:36.66 Set first swap of settings
09:49:36.66 Apply new holidays
09:49:36.66 Holidays applied
09:49:36.66 Second swap of settings set
09:49:36.66 Everything is done
09:49:41.85 Broadcaster started
09:49:41.85 Sending broadcast
09:49:41.90 Got new Broadcast: 002915373C17162E1D095E5F42533F0F06333A1C1D1F19480B021E077B686B6E614A5D5A534C4E0909067D60746E67404A5E564F0A4C435720233031345920282D547B050303
09:49:42.35 Sending broadcast
09:49:42.51 Got Broadcast
09:49:42.62 Got new Broadcast: 002915373C17162E1D095E5F42533F0F06333A1C1D1F3A3B405F51522E31362B2F484A594B4804081E077F636B6E654C0F525C490200010779697C6A604F4B1716185F4345582A70161C1B543A5E564C
09:49:42.85 Sending broadcast
09:49:42.89 Got new Broadcast: 002915373C17162E1D095E5F42533F0F06333A1C1D1F19480B021E077B686B6E614A5D5A534C4E0909067D60746E67404A5E564F0A4C435720233031345920282D547B050303
09:49:43.84 Try connecting to 192.168.123.165...
09:49:43.92 Connect to Android OK
09:49:43.92 Settimeout: RT=2000 WT=500
09:49:43.92 bOpened=True
09:49:43.93 [TX]: AT+CGSN
09:49:44.02 [RX]: AT+CGSN
09:49:44.02 [RX]: 99000114995368
09:49:44.02 [RX]: OK
09:49:44.02 Settimeout: RT=15000 WT=1000
09:49:44.03 [TX]: AT*PIN?
09:49:44.04 [RX]: AT*PIN?
09:49:44.04 [RX]: *PIN: ACCESS PROTECTED,10
09:49:44.04 [RX]: OK
09:49:52.75 [TX]: AT*PIN=1513c78b92c2ccb297349d815b8ab338
09:49:52.93 [RX]: AT*PIN=1513c78b92c2ccb297349d815b8ab338
09:49:52.93 [RX]: *PIN: ACCESS OK,10
09:49:52.93 [RX]: OK
09:49:52.94 [TX]: ATI
09:49:52.95 [RX]: ATI
09:49:52.95 [RX]: samsung SCH-I535
09:49:52.95 [RX]: OK
09:49:52.95 [TX]: AT*APPVERSION=1.8.2
09:49:52.96 [RX]: AT*APPVERSION=1.8.2
09:49:52.96 [RX]: 15,1.0.18
09:49:52.96 [RX]: OK
09:49:52.96 [TX]: AT+CSCS="UTF-8"
09:49:52.97 [RX]: AT+CSCS="UTF-8"
09:49:52.97 [RX]: OK
09:49:52.97 [TX]: AT+CNMI=2,1,0,1
09:49:52.98 [RX]: AT+CNMI=2,1,0,1
09:49:52.98 [RX]: ERROR
09:49:52.98 [TX]: AT*ECAM=1
09:49:52.98 [RX]: AT*ECAM=1
09:49:52.98 [RX]: OK
09:49:52.99 [TX]: AT+CIND=?
09:49:52.99 [RX]: AT+CIND=?
09:49:52.99 [RX]: ERROR
09:49:53.00 [TX]: AT+CBC
09:49:53.00 [RX]: AT+CBC
09:49:53.00 [RX]: +CBC: 0,100
09:49:53.01 [RX]: OK
09:49:53.01 [TX]: AT+CSQ
09:49:53.02 [RX]: AT+CSQ
09:49:53.02 [RX]: +CSQ: 263194,99

Thank you for the logfile.
Should be fixed, please install the current beta: http://www.fjsoft.at/files/MyPhoneExplo ... Update.exe

USB and WiFi both work now. Syncs without a problem.

Thanks!