restoring calendar from w800i to k800i

[Danoboyo]

any ideas how to do this? it's does the first 4 then says

"connection to phone not possible"

everything else is working fine.

[FJ]

You've set the wrong COM-Port

[Dano]

When i select the other COM port , it says "Telephone not connected"

[FJ]

Please post the first ten lines of the logfile.

[danoboyo]

Logdatei MyPhoneExplorer
************************
Programmversion: 1.4.5
Datum: 09/10/2006


11:04:43.76 Setting Port: 24
11:04:43.76 Setting Baud: 921600
11:04:43.76 Avaiable Ports: COM1=\Device\Serial0;
11:04:44.31 frmSplash geladen
11:04:46.12 Mainfenster wird geladen
11:04:46.42 Sidebar fertig geladen
11:04:46.43 Aktiviere Subclassing
11:04:46.54 UC SMS wird geladen
11:04:46.62 UC Phonebook wird geladen
11:04:46.65 UC Phonebook fertig geladen
11:04:46.65 UC Calls wird geladen
11:04:46.79 UC Organizer wird geladen
11:04:47.00 DoItemUpdate
11:04:47.03 DoItemUpdate fertig
11:04:47.17 UC Notes wird geladen
11:04:47.17 UC Calls wird geladen
11:04:47.28 Setting Lastuser: Sony Ericsson K800 [353427011210232]
11:04:47.28 Lade Userdatenbank: Sony Ericsson K800 [353427011210232]
11:04:47.31 GMT Einstellungen geladen
11:04:47.31 InfoSMS geladen
11:04:47.33 Notizeintrag gesetzt
11:04:47.33 Usermenü aktualisiert
11:04:47.78 Kontakte geladen
11:04:47.84 DoItemUpdate
11:04:47.89 DoItemUpdate fertig
11:04:47.89 Organizer geladen
11:04:47.90 Notizen geladen
11:04:47.93 SMS - Datenbank wird geladen...
11:04:47.97 SMS Laden - Readfile: 31 Split: 0 Parse: 31 HandleMultiSMS: 0 Nachrichten: 17
11:04:48.00 SMS geladen
11:04:48.03 Anrufe geladen
11:04:48.14 Mainfenster fertig geladen
11:06:00.57 Neue COM-Bibliothek wird verwendet
11:06:00.61 Settimeout: RT=2000 WT=200
11:06:01.11 Port 24 wurde geöffnet !

[FJ]

- First connect your phone to the cable
- Then start MyPhoneExplorer
- Then post the logfile.

[Dano]

sorry but wheres the logfile?
Dan

[FJ]

C:\Programs\MyPhoneExplorer\Debug.txt

[Dano]

Logdatei MyPhoneExplorer
************************
Programmversion: 1.4.5
Datum: 09/10/2006


11:04:43.76 Setting Port: 24
11:04:43.76 Setting Baud: 921600
11:04:43.76 Avaiable Ports: COM1=\Device\Serial0;
11:04:44.31 frmSplash geladen
11:04:46.12 Mainfenster wird geladen
11:04:46.42 Sidebar fertig geladen
11:04:46.43 Aktiviere Subclassing
11:04:46.54 UC SMS wird geladen
11:04:46.62 UC Phonebook wird geladen
11:04:46.65 UC Phonebook fertig geladen
11:04:46.65 UC Calls wird geladen
11:04:46.79 UC Organizer wird geladen
11:04:47.00 DoItemUpdate
11:04:47.03 DoItemUpdate fertig
11:04:47.17 UC Notes wird geladen
11:04:47.17 UC Calls wird geladen
11:04:47.28 Setting Lastuser: Sony Ericsson K800 [353427011210232]
11:04:47.28 Lade Userdatenbank: Sony Ericsson K800 [353427011210232]
11:04:47.31 GMT Einstellungen geladen
11:04:47.31 InfoSMS geladen
11:04:47.33 Notizeintrag gesetzt

[Dano]

this is the last few lines


12:10:46.29 Neue COM-Bibliothek wird verwendet
12:10:46.29 Settimeout: RT=2000 WT=200
12:10:46.79 Port 24 wurde geöffnet !
12:10:46.79 [TX]: AT+CGSN
12:10:46.85 [RX]: AT+CGSN

12:10:46.85 [RX]: 353427011210232
12:10:46.85 [RX]: OK
12:10:46.85 Settimeout: RT=10000 WT=1000
12:10:46.87 [TX]: AT+CGMI
12:10:46.90 [RX]: AT+CGMI

12:10:46.90 [RX]: Sony Ericsson
12:10:46.90 [RX]: OK
12:10:46.90 [TX]: ATI
12:10:46.95 [RX]: ATI

12:10:46.95 [RX]: Sony Ericsson K800
12:10:46.95 [RX]: OK
12:10:46.95 [TX]: AT+CSCS="UTF-8"
12:10:46.99 [RX]: AT+CSCS="UTF-8"

12:10:46.99 [RX]: OK
12:10:46.99 [TX]: AT+CNMI=2,1,0,1
12:10:57.02 [TX]: AT*ECAM=1
12:10:57.02 Systemerror: 0 [The operation completed successfully.]
12:11:12.37 [TX]: AT*EVH=?
12:11:12.37 Systemerror: 0 [The operation completed successfully.]
12:11:13.06 [TX]: AT+CBC
12:11:13.06 Systemerror: 0 [The operation completed successfully.]
12:11:13.73 [TX]: AT+CSQ
12:11:13.73 Systemerror: 0 [The operation completed successfully.]
12:11:14.10 Alle Verbindungsaktionen beendet
12:11:14.10 Suche Memorystick: A:\ C:\ D:\ E:\ F:\ H:\ I:\ J:\ L:\ M:\ P:\ R:\ S:\ T:\ U:\
12:11:14.12 Suche abgeschlossen:
12:11:16.20 Port 24 wird geschlossen

[FJ]

danoboyo = Dano ?

[Dano]

yes dano=danoboyo

[FJ]

- First connect your phone to the cable
- Then start MyPhoneExplorer
- Then post the logfile.

[Dano]

Logdatei MyPhoneExplorer
************************
Programmversion: 1.4.5
Datum: 10/10/2006


14:33:53.36 Setting Port: 24
14:33:53.36 Setting Baud: 921600
14:33:53.36 Avaiable Ports: COM1=\Device\Serial0; COM23=\Device\SE27obex0; COM24=\Device\SE27mgmt0;
14:33:53.72 frmSplash geladen
14:33:54.44 Mainfenster wird geladen
14:33:54.62 Sidebar fertig geladen
14:33:54.62 Aktiviere Subclassing
14:33:54.67 UC SMS wird geladen
14:33:54.72 UC Phonebook wird geladen
14:33:54.75 UC Phonebook fertig geladen
14:33:54.76 UC Calls wird geladen
14:33:54.86 UC Organizer wird geladen
14:33:55.08 DoItemUpdate
14:33:55.14 DoItemUpdate fertig
14:33:55.25 UC Notes wird geladen
14:33:55.26 UC Calls wird geladen
14:33:55.37 Setting Lastuser: Sony Ericsson K800 [353427011210232]
14:33:55.37 Lade Userdatenbank: Sony Ericsson K800 [353427011210232]
14:33:55.37 GMT Einstellungen geladen
14:33:55.37 InfoSMS geladen
14:33:55.39 Notizeintrag gesetzt
14:33:55.39 Usermenü aktualisiert
14:33:55.78 Kontakte geladen
14:33:55.81 DoItemUpdate
14:33:55.86 DoItemUpdate fertig
14:33:55.86 Organizer geladen
14:33:55.87 Notizen geladen
14:33:55.87 SMS - Datenbank wird geladen...
14:33:55.91 SMS Laden - Readfile: 0 Split: 0 Parse: 31 HandleMultiSMS: 0 Nachrichten: 17
14:33:55.92 SMS geladen
14:33:56.00 Anrufe geladen
14:33:56.09 Mainfenster fertig geladen
14:33:59.06 Neue COM-Bibliothek wird verwendet
14:33:59.08 Settimeout: RT=2000 WT=200
14:33:59.58 Port 24 wurde geöffnet !
14:33:59.61 [TX]: AT+CGSN
14:33:59.70 [RX]: AT+CGSN

14:33:59.70 [RX]: 353427011210232
14:33:59.72 [RX]: OK
14:33:59.72 Settimeout: RT=10000 WT=1000
14:33:59.72 [TX]: AT+CGMI
14:33:59.80 [RX]: AT+CGMI

14:33:59.80 [RX]: Sony Ericsson
14:33:59.81 [RX]: OK
14:33:59.81 [TX]: ATI
14:33:59.84 [RX]: ATI

14:33:59.84 [RX]: Sony Ericsson K800
14:33:59.84 [RX]: OK
14:33:59.84 [TX]: AT+CSCS="UTF-8"
14:33:59.88 [RX]: AT+CSCS="UTF-8"

14:33:59.88 [RX]: OK
14:33:59.88 [TX]: AT+CNMI=2,1,0,1
14:33:59.91 [RX]: AT+CNMI=2,1,0,1

14:33:59.91 [RX]: OK
14:33:59.91 [TX]: AT*ECAM=1
14:33:59.94 [RX]: AT*ECAM=1

14:33:59.94 [RX]: OK
14:33:59.94 [TX]: AT*EVH=?
14:34:00.02 [RX]: AT*EVH=?

14:34:00.02 [RX]: ERROR
14:34:00.02 [TX]: AT+CBC
14:34:00.11 [RX]: AT+CBC

14:34:00.11 [RX]: +CBC: 1, 28
14:34:00.14 [RX]: OK
14:34:00.16 [TX]: AT+CSQ
14:34:00.19 [RX]: AT+CSQ

14:34:00.19 [RX]: +CSQ: 10,99
14:34:00.19 [RX]: OK
14:34:00.19 Alle Verbindungsaktionen beendet
14:34:00.19 Suche Memorystick: A:\ C:\ D:\ E:\ H:\ I:\ J:\ L:\ M:\ P:\ R:\ S:\ T:\ U:\ Y:\
14:34:00.20 Suche abgeschlossen:
14:34:10.21 Settimeout: RT=1200 WT=200
14:34:10.23 [TX]: AT+CBC
14:34:10.34 [RX]: AT+CBC

14:34:10.34 [RX]: +CBC: 1, 23
14:34:10.34 [RX]: OK
14:34:10.35 [TX]: AT+CSQ
14:34:10.41 [RX]: AT+CSQ

14:34:10.41 [RX]: +CSQ: 9,99
14:34:10.45 [RX]: OK
14:34:20.47 [TX]: AT+CBC
14:34:20.55 [RX]: AT+CBC

14:34:20.55 [RX]: +CBC: 1, 23
14:34:20.58 [RX]: OK
14:34:20.58 [TX]: AT+CSQ
14:34:20.64 [RX]: AT+CSQ

14:34:20.64 [RX]: +CSQ: 9,99
14:34:20.67 [RX]: OK

[FJ]

There are two ports missing - please reinstall the drivers for your phone

[Colamannen]

There are two ports missing - please reinstall the drivers for your phone

I have the same problem. I have attempt to reinstall the drivers, but it still the same.

My Log File
Logdatei MyPhoneExplorer
************************
Programmversion: 1.5.8
Datum: 2007-02-18


17:47:34.19 Setting Port: 7
17:47:34.19 Setting Baud: 921600
17:47:34.19 Avaiable Ports: COM1=\Device\Serial0; COM2=\Device\Serial1; COM3=\Device\VCP0; COM4=\Device\SE27mdm0; COM5=\Device\SE27mdm1; COM6=\Device\SE27obex0; COM7=\Device\SE27mgmt0;
17:47:34.35 frmSplash geladen
17:47:34.85 Hauptfenster wird geladen
17:47:35.07 Sidebar fertig geladen
17:47:35.20 Farbschema wurde gelesen
17:47:35.32 UC SMS wird geladen
17:47:35.40 UC Phonebook wird geladen
17:47:35.46 UC Phonebook fertig geladen
17:47:35.47 UC Calls wird geladen
17:47:35.57 UC Organizer wird geladen
17:47:35.90 UC Notes wird geladen
17:47:35.92 UC Calls wird geladen
17:47:36.03 Setting Lastuser: Sony Ericsson K800 [353996014696613]
17:47:36.03 Lade Userdatenbank: Sony Ericsson K800 [353996014696613]
17:47:36.03 GMT Einstellungen geladen
17:47:36.03 InfoSMS geladen
17:47:36.05 Notizeintrag gesetzt
17:47:36.16 Kontakte geladen
17:47:36.22 DoItemUpdate
17:47:36.24 DoItemUpdate fertig
17:47:36.27 Organizer geladen
17:47:36.28 Notizen geladen
17:47:36.28 SMS - Datenbank wird geladen...
17:47:36.28 SMS Laden - Readfile: 0 Split: 0 Parse: 0 HandleMultiSMS: 0 Nachrichten: 2
17:47:36.29 SMS geladen
17:47:36.33 Anrufe geladen
17:47:36.40 Hauptfenster fertig geladen
17:47:38.09 Neue COM-Bibliothek wird verwendet
17:47:38.09 Settimeout: RT=2000 WT=200
17:47:38.59 Port 7 wurde geöffnet !
17:47:38.59 [TX]: AT+CGSN
17:47:38.86 [RX]: AT+CGSN

17:47:38.86 [RX]: 353996014696613
17:47:38.86 [RX]: OK
17:47:38.86 Settimeout: RT=15000 WT=1000
17:47:38.86 [TX]: AT+CGMI
17:47:39.44 [RX]: AT+CGMI

17:47:39.44 [RX]: Sony Ericsson
17:47:39.44 [RX]: OK
17:47:39.44 [TX]: ATI
17:47:39.68 [RX]: ATI

17:47:39.68 [RX]: Sony Ericsson K800
17:47:39.68 [RX]: OK
17:47:39.68 [TX]: AT+CSCS="UTF-8"
17:47:39.93 [RX]: AT+CSCS="UTF-8"

17:47:39.93 [RX]: OK
17:47:39.93 [TX]: AT+CNMI=2,1,0,1
17:47:40.48 [RX]: AT+CNMI=2,1,0,1

17:47:40.48 [RX]: OK
17:47:40.48 [TX]: AT*ECAM=1
17:47:40.99 [RX]: AT*ECAM=1

17:47:40.99 [RX]: OK
17:47:40.99 [TX]: AT*EVH=?
17:47:41.18 [RX]: AT*EVH=?

17:47:41.18 [RX]: ERROR
17:47:41.18 [TX]: AT+CBC
17:47:42.04 [RX]: AT+CBC

17:47:42.04 [RX]: +CBC: 1, 53
17:47:42.04 [RX]: OK
17:47:42.05 [TX]: AT+CSQ
17:47:42.23 [RX]: AT+CSQ

17:47:42.23 [RX]: +CSQ: 99,99
17:47:42.23 [RX]: OK
17:47:42.23 Alle Verbindungsaktionen beendet
17:47:42.24 Suche Memorystick: A:\ C:\ D:\ E:\ F:\ G:\ H:\ I:\
17:47:42.24 Suche abgeschlossen:

[FJ]

Use COM4 or COM5