Alarm after update of android app

For user who dont speak german please use this part of my forum
ploppy

Alarm after update of android app

Beitrag von ploppy »

Android Add ver. 1.0.14

After updating the add, the alarm no longer sets in the telefon.

Anybody else seen this ?
Gast

Re: Alarm after update of android app

Beitrag von Gast »

Android Add ver. 1.0.14

After updating the app, the alarm no longer sets in the telefon.

Anybody else seen this ?
FJ
Site Admin
Beiträge: 32106
Registriert: Mi 15. Feb 2006, 01:16
Wohnort: Tirol
Kontaktdaten:

Beitrag von FJ »

Which phone-model ?
Ich bitte um Verständnis daß ich aufgrund des hohen Aufkommens im Forum und meines zeitlichen Rahmens nichtmehr jeden Thread im Forum persönlich lesen bzw. beantworten kann.

Bitte benutzt auch die Forum-Suche bzw. die FAQ
ploppy

Alarm after update of android app

Beitrag von ploppy »

FJ hat geschrieben:Which phone-model ?
Samsung Galaxy 1 (i9000)

relevant part of the log.

07:39:02.57 [RX]: OK
07:39:02.57 DataLen=1927 Response=OK True
07:39:02.57 SMS Daten empfangen...
07:39:02.57 Import SMS, 13 Zeilen...
07:39:02.57 Import SMS fertig, 13 SMS importiert
07:39:02.57 CheckTmpStore
07:39:02.57 Importieren der SMS hat funktioniert...
07:39:02.57 SaveDatafile: SMS.dat (3104 Bytes)
07:39:02.59 SMS-Datenbank gespeichert. Dauer:15 SMS:13
07:39:09.35 Settimeout: RT=3500 WT=800
07:39:09.35 [TX]: AT+CBC
07:39:09.45 [RX]: AT+CBC
07:39:09.45 [RX]: +CBC: 1,100
07:39:09.45 [RX]: OK
07:39:09.46 [TX]: AT+CSQ
07:39:09.51 [RX]: AT+CSQ
07:39:09.51 [RX]: +CSQ: 13,99
07:39:09.53 [RX]: OK
07:39:11.60 Settimeout: RT=15000 WT=1000
07:39:11.60 [TX]: AT+CALA=?
07:39:11.70 [RX]: AT+CALA=?
07:39:11.70 [RX]: OK
07:39:11.71 [TX]: AT+CALA?
07:39:12.13 [RX]: AT+CALA?
07:39:12.13 [RX]: ERROR
07:39:19.53 Settimeout: RT=3500 WT=800
07:39:19.53 [TX]: AT+CBC
07:39:19.67 [RX]: AT+CBC
07:39:19.67 [RX]: +CBC: 1,100
07:39:19.67 [RX]: OK
07:39:19.67 [TX]: AT+CSQ
07:39:19.68 [RX]: AT+CSQ
07:39:19.68 [RX]: +CSQ: 13,99
07:39:19.68 [RX]: OK
07:39:27.56 Settimeout: RT=15000 WT=1000
07:39:27.56 [TX]: AT+CALA="07:39",0,1,"","",1
07:39:27.71 [RX]: AT+CALA="07:39",0,1,"","",1
07:39:27.71 [RX]: OK
07:39:27.73 [TX]: AT+CALA=?
07:39:27.73 [RX]: AT+CALA=?
07:39:27.73 [RX]: OK
07:39:27.75 [TX]: AT+CALA?
07:39:27.78 [RX]: AT+CALA?
07:39:27.78 [RX]: ERROR
07:39:29.68 Settimeout: RT=3500 WT=800
07:39:29.68 [TX]: AT+CBC
07:39:29.79 [RX]: AT+CBC
07:39:29.79 [RX]: +CBC: 1,100
07:39:29.79 [RX]: OK
07:39:29.81 [TX]: AT+CSQ
07:39:29.82 [RX]: AT+CSQ
07:39:29.82 [RX]: +CSQ: 13,99
07:39:29.82 [RX]: OK
07:39:34.75 Refresh ComDescriptions...
07:39:34.95 PORT: COM1 Enumerator=ACPI Displayed=Kommunikasjonsport InstanceID=ACPI\PNP0501\1
07:39:34.95 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_29B7&SUBSYS_02111028&REV_02\3&172E68DD&0&1B
07:39:35.88 StickyNotesPath=C:\WINDOWS\Sysnative\StikyNot.exe FileExists=False
ploppy

Alarm after update of android app

Beitrag von ploppy »

FJ hat geschrieben:Which phone-model ?
updated MPE where i see we noe have contacts for viber / skype. Nice touch :-)

Also updated the android app.

Still have a problem setting the alarms via MPE.

The organiser / alarms window no longer reacts at all, fails with connection to phone not possible.

10:07:10.71 DataLen=2086 Response=OK True
10:07:10.71 SMS Daten empfangen...
10:07:10.71 Import SMS, 13 Zeilen...
10:07:10.73 Import SMS fertig, 13 SMS importiert
10:07:10.73 CheckTmpStore
10:07:10.73 Importieren der SMS hat funktioniert...
10:07:10.73 SaveDatafile: SMS.dat (3451 Bytes)
10:07:10.73 SMS-Datenbank gespeichert. Dauer:0 SMS:13
10:07:15.35 Refresh ComDescriptions...
10:07:15.48 PORT: COM1 Enumerator=ACPI Displayed=Kommunikasjonsport InstanceID=ACPI\PNP0501\1
10:07:15.48 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_29B7&SUBSYS_02111028&REV_02\3&172E68DD&0&1B
10:07:16.26 StickyNotesPath=C:\WINDOWS\Sysnative\StikyNot.exe FileExists=False
10:07:25.18 OK pressed in settingswindow
10:07:25.23 Set first swap of settings
10:07:25.25 Apply new holidays
10:07:25.25 Holidays applied
10:07:25.25 Second swap of settings set
10:07:25.25 Everything is done
10:18:11.78 Settimeout: RT=15000 WT=1000
10:18:11.78 [TX]: AT+CALA=?
10:18:32.95 SocketError: 10053 - Connection is aborted due to timeout or other failure
10:18:58.84 [TX]: AT+CALA=?
10:18:58.84 Android Socket not connected!
10:18:58.84 WritePort failed. TransferedBytes=0 Systemerror: 0 [Operasjonen er utført.]
10:18:58.84 ErrMsg: Connection to phone not possible!
10:19:18.26 [TX]: AT+CALA=?
10:19:18.26 Android Socket not connected!
10:19:18.26 WritePort failed. TransferedBytes=0 Systemerror: 0 [Operasjonen er utført.]
10:19:18.26 ErrMsg: Connection to phone not possible!
10:19:53.03 [TX]: AT+CALA=?
10:19:53.03 Android Socket not connected!
10:19:53.03 WritePort failed. TransferedBytes=0 Systemerror: 0 [Operasjonen er utført.]
10:19:53.03 ErrMsg: Connection to phone not possible!
10:20:23.85 Refresh ComDescriptions...
10:20:24.00 PORT: COM1 Enumerator=ACPI Displayed=Kommunikasjonsport InstanceID=ACPI\PNP0501\1
10:20:24.00 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_29B7&SUBSYS_02111028&REV_02\3&172E68DD&0&1B
10:20:24.78 StickyNotesPath=C:\WINDOWS\Sysnative\StikyNot.exe FileExists=False
FJ
Site Admin
Beiträge: 32106
Registriert: Mi 15. Feb 2006, 01:16
Wohnort: Tirol
Kontaktdaten:

Beitrag von FJ »

Samsung-Phones do not have the standard alarm application as the rest of the Android world. They have a own solution from Samsung. If i'll find the time for this i will try to make it compatible
Ich bitte um Verständnis daß ich aufgrund des hohen Aufkommens im Forum und meines zeitlichen Rahmens nichtmehr jeden Thread im Forum persönlich lesen bzw. beantworten kann.

Bitte benutzt auch die Forum-Suche bzw. die FAQ
ManfredU
Beiträge: 77
Registriert: Fr 17. Feb 2006, 15:14
Wohnort: Hofheim

Beitrag von ManfredU »

Using the latest beta with a Nexus S running Android 4.0.3 the alarm function seems not to work all (alarms are not set in the phone, disappear immediately in the MPE user interface and alarms entered on the phone are not visible either).
FJ
Site Admin
Beiträge: 32106
Registriert: Mi 15. Feb 2006, 01:16
Wohnort: Tirol
Kontaktdaten:

Beitrag von FJ »

Please post the logfile after click on "Alarms" in MPE
Ich bitte um Verständnis daß ich aufgrund des hohen Aufkommens im Forum und meines zeitlichen Rahmens nichtmehr jeden Thread im Forum persönlich lesen bzw. beantworten kann.

Bitte benutzt auch die Forum-Suche bzw. die FAQ
ManfredU
Beiträge: 77
Registriert: Fr 17. Feb 2006, 15:14
Wohnort: Hofheim

Beitrag von ManfredU »

Code: Alles auswählen

Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.2
nightly vom 02.01.2012 23:48:13
Datum:   11.01.2012

23:32:59.72       Setting Port: 999
23:32:59.72       Setting Baud: 921600
23:32:59.72       Avaiable Ports: COM1=\Device\Serial0; COM3=\Device\AgereModem5; 
23:32:59.76       Main Load frmSplash
23:32:59.95       Load frmSplash...
23:32:59.96       Show splash...
23:32:59.99       frmSplash geladen
23:33:02.36       Hauptfenster wird geladen
23:33:03.21       Sidebar fertig geladen
23:33:03.65       UC SMS wird geladen
23:33:03.72       UC Phonebook wird geladen
23:33:03.78       UC Phonebook fertig geladen
23:33:03.78       UC Calls wird geladen
23:33:03.83       UC Organizer wird geladen
23:33:04.03       Organizer initiated
23:33:04.08       Startpage=2
23:33:04.10       DoItemUpdate
23:33:04.18       DoItemUpdate fertig
23:33:04.18       UC Filebrowser wird geladen
23:33:04.45       UC Filebrowser fertig geladen
23:33:04.45       UC AppBrowser wird geladen
23:33:04.47       UC Notes wird geladen
23:33:04.48       UC Calls wird geladen
23:33:04.90       Broadcaster started
23:33:04.90       Sending broadcast
23:33:05.40       Sending broadcast
23:33:05.92       Sending broadcast
23:33:06.90       bOpened=False
23:33:06.90       Failed to obtain the IP-address of the phone
23:33:06.90       Refresh ComDescriptions...
23:33:06.90       PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\5&23F622A9&0
23:33:06.91       MODEM: COM3 Enumerator=HDAUDIO Displayed=LSI HDA Modem FriendlyName=LSI HDA Modem InstanceID=HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_103C3066&REV_1002\4&2252EEA4&0&0101
23:33:06.91       ErrMsg (Silent): Connection to phone could not be established:
Failed to obtain the IP-address of the phone
23:33:06.97       Setting Lastuser: samsung Nexus S [357194043560069]
23:33:07.00       Lade Userdatenbank: samsung Nexus S [357194043560069]
23:33:07.09       LoadDatafile: Phonebook.dat(46664 Bytes)
23:33:07.23       Kontakte geladen
23:33:07.29       LoadDatafile: Calls.dat(3181 Bytes)
23:33:07.38       Anrufe geladen
23:33:07.38       Organizer LoadUser DefaultTimeColWidth=97
23:33:07.39       LoadDatafile: Organizer.dat(101285 Bytes)
23:33:07.48       DoItemUpdate
23:33:07.56       DoItemUpdate fertig
23:33:07.71       Organizer geladen
23:33:07.71       LoadDatafile: Notes.dat(3795 Bytes)
23:33:07.72       StickyNotesPath=C:\Windows\Sysnative\StikyNot.exe FileExists=True
23:33:07.78       StickyNotesTitle=Sticky Notes
23:33:07.78       Notizen geladen
23:33:07.79       Load SMS Data...
23:33:07.84       LoadDatafile: SMS.dat(14400 Bytes)
23:33:07.84       SMS - Datenbank wird geladen...
23:33:07.86       SMS Laden  - Readfile: 47 Split: 0 Parse: 16 HandleMultiSMS: 0 Nachrichten: 79
23:33:07.89       LoadDatafile: SMSArchive.dat(120 Bytes)
23:33:07.89       SMS Archiv laden - Parse: 31
23:33:07.96       RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
23:33:08.00       SMS Data Loaded...
23:33:08.00       SMS geladen
23:33:08.98       Hauptfenster fertig geladen
23:33:09.23       Downloader: RC=6 BytesMax=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
23:33:14.53       Sending broadcast
23:33:15.04       Sending broadcast
23:33:15.54       Sending broadcast
23:33:16.54       Try connecting to 10.1.2.235 (cached WifiIP)...
23:33:17.02       Connect to Android OK
23:33:17.02       Settimeout: RT=2000 WT=500
23:33:17.02       bOpened=True
23:33:17.03 [TX]: AT+CGSN
23:33:17.28 [RX]: AT+CGSN
23:33:17.28 [RX]: 357194043560069
23:33:17.28 [RX]: OK
23:33:17.29       Settimeout: RT=15000 WT=1000
23:33:17.29 [TX]: AT*PIN?
23:33:17.93 [RX]: AT*PIN?
23:33:17.93 [RX]: *PIN: ACCESS OK,10
23:33:17.93 [RX]: OK
23:33:17.94 [TX]: ATI
23:33:18.20 [RX]: ATI
23:33:18.20 [RX]: samsung Nexus S
23:33:18.20 [RX]: OK
23:33:18.20 [TX]: AT*APPVERSION=1.8.2
23:33:18.56 [RX]: AT*APPVERSION=1.8.2
23:33:18.56 [RX]: 15,1.0.15 beta17
23:33:18.56 [RX]: OK
23:33:18.57 [TX]: AT+CSCS="UTF-8"
23:33:18.81 [RX]: AT+CSCS="UTF-8"
23:33:18.81 [RX]: OK
23:33:18.82 [TX]: AT+COPS?
23:33:19.13 [RX]: AT+COPS?
23:33:19.13 [RX]: +COPS: 0,0," ",0
23:33:19.13 [RX]: OK
23:33:19.14 [TX]: AT+CNMI=2,1,0,1
23:33:19.43 [RX]: AT+CNMI=2,1,0,1
23:33:19.43 [RX]: ERROR
23:33:19.43 [TX]: AT*ECAM=1
23:33:19.77 [RX]: AT*ECAM=1
23:33:19.77 [RX]: OK
23:33:19.77 [TX]: AT+CIND=?
23:33:20.04 [RX]: AT+CIND=?
23:33:20.04 [RX]: ERROR
23:33:20.04 [TX]: AT+CBC
23:33:20.39 [RX]: AT+CBC
23:33:20.39 [RX]: +CBC: 0,39
23:33:20.40 [RX]: OK
23:33:20.40 [TX]: AT+CSQ
23:33:20.66 [RX]: AT+CSQ
23:33:20.66 [RX]: +CSQ: 4,99
23:33:20.66 [RX]: OK
23:33:20.66       Alle Verbindungsaktionen beendet
23:33:25.70 [TX]: AT+CALA=?
23:33:25.92 [RX]: AT+CALA=?
23:33:25.92 [RX]: OK
23:33:25.93 [TX]: AT+CALA?
23:33:26.19 [RX]: AT+CALA?
23:33:26.19 [RX]: DUMP: java.lang.NullPointerException
23:33:26.19 [RX]: ERROR
23:33:30.67       Settimeout: RT=3500 WT=800
23:33:30.67 [TX]: AT+CBC
23:33:30.83 [RX]: AT+CBC
23:33:30.83 [RX]: +CBC: 0,39
23:33:30.84 [RX]: OK
23:33:30.84 [TX]: AT+CSQ
23:33:31.11 [RX]: AT+CSQ
23:33:31.11 [RX]: +CSQ: 4,99
23:33:31.12 [RX]: OK
23:33:33.71       Refresh ComDescriptions...
23:33:33.71       PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\5&23F622A9&0
23:33:33.72       MODEM: COM3 Enumerator=HDAUDIO Displayed=LSI HDA Modem FriendlyName=LSI HDA Modem InstanceID=HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_103C3066&REV_1002\4&2252EEA4&0&0101
ManfredU
Beiträge: 77
Registriert: Fr 17. Feb 2006, 15:14
Wohnort: Hofheim

Beitrag von ManfredU »

Did that log tell you something? I have still the issue that alarms don't work with my Nexus S.
FJ
Site Admin
Beiträge: 32106
Registriert: Mi 15. Feb 2006, 01:16
Wohnort: Tirol
Kontaktdaten:

Beitrag von FJ »

Sorry, i forgot to answer this thread. Please update MyPhoneExplorer Client throught market to 1.0.18 and try it again, i made some changes on the alarm access.
Ich bitte um Verständnis daß ich aufgrund des hohen Aufkommens im Forum und meines zeitlichen Rahmens nichtmehr jeden Thread im Forum persönlich lesen bzw. beantworten kann.

Bitte benutzt auch die Forum-Suche bzw. die FAQ
ManfredU
Beiträge: 77
Registriert: Fr 17. Feb 2006, 15:14
Wohnort: Hofheim

Beitrag von ManfredU »

Issue still exists with MPE client 1.0.18. Nexus S with Android 4.0.4.
FJ
Site Admin
Beiträge: 32106
Registriert: Mi 15. Feb 2006, 01:16
Wohnort: Tirol
Kontaktdaten:

Beitrag von FJ »

OK, please download the Alarm App with MyPhoneExplorer (Files-Applications) to PC and send me the apk-File via email
Ich bitte um Verständnis daß ich aufgrund des hohen Aufkommens im Forum und meines zeitlichen Rahmens nichtmehr jeden Thread im Forum persönlich lesen bzw. beantworten kann.

Bitte benutzt auch die Forum-Suche bzw. die FAQ
Antworten