SATIO

Anmeldedatum: 18.02.2010 Beiträge: 7

FJ hat Folgendes geschrieben:

Zitat:

No! Which makes me think we're fighting a losing battle....

Head up! Do you have the possibility to try Bluetooth or another PC ?

Yeah, I've got a bluetooth dongle and actually tried that at work (where I am now) but couldn't pair the device, possibly I was missing a command in the menu of the phone to achieve that.

At home (different laptop) I could connect over USB but couldn't sync the contacts (I posted the error log yesterday evening). I will take the bluetooth dongle home tonight and can try using that if you have some suggestions. The phone is actually my brother's.

Verfasst am: Fr Feb 19, 2010 11:32

OK, but before you try it via Bluetooth at home please also install the current beta. There is a change in it which affects especially to the bluetooth-connection

Gast

Hi!

the USB OBEX port is COM10.

I can sync teh contact with PC-suite.

I also restarted the phone by reinsering the battery.

What should I do?

Verfasst am: Fr Feb 19, 2010 15:51

Yicker hat Folgendes geschrieben:

Hi,

Just thought I'd post something positive for you in this thread.

I've just updated MPE to 1.7.5 and so far it seems to work very well with my Satio. I'm now able to Sync Contacts, Calendar, Notes etc which I was unable to do in the previous versions.

So well done to everyone concerned and keep up the good work Very Happy

Cheers
Scott

Well, it seems my excitement at MPE working with my Satio was shorted lived Sad

Yesterday I did a reset back to the factory settings and ran the SE Update application to do a repair as I couldn't get the GPS to work.

The consequence of these actions is that the GPS now works but MPE no longer syncs with my Satio. I get the error 'OBEX Errorcode : 00 - Phone didn't answer'. I no longer have any contacts in my phone although thankfully they are still in MPE.

I also tried PC Suite but that failed to sync with the Contacts etc as well so I'm back to where I started. Sad

Scott

Verfasst am: Fr Feb 19, 2010 15:51

The Ports are correct.
Did you close the PC-Suite before syncing with MPE (complete close, not just the Mainwindow of the PC-Suite)

Gast

If I remember, MPE asked if I wanted it to close PC-suite before to continue with the sync process.
And this is what I did.

Verfasst am: Fr Feb 19, 2010 18:25

OK. Is your PC working on the 64bit-Platform ?

Gast

I do not think WinXP home runs on 64bits, doesn't it?

Anmeldedatum: 18.02.2010 Beiträge: 7

Hi FJ, now at home, on different laptop. Have paired the phone over bluetooth and tried to connect. No luck

Here is the error message

Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.5
nightly vom 16/02/2010 20:55:49
Datum: 19/02/2010

18:29:37.97 Setting Port: 6
18:29:37.97 Setting Baud: 921600
18:29:38.03 Avaiable Ports: COM3=\Device\AgereModem5; COM4=\Device\Ircomm0; COM5=\Device\BthModem0; COM6=\Device\BthModem1;
18:29:38.05 Main Load frmSplash
18:29:38.78 Load frmSplash...
18:29:38.78 Show splash...
18:29:38.88 frmSplash geladen
18:29:40.64 Hauptfenster wird geladen
18:29:41.08 Sidebar fertig geladen
18:29:41.11 Farbschema wurde gelesen
18:29:41.37 UC SMS wird geladen
18:29:41.51 UC Phonebook wird geladen
18:29:41.60 UC Phonebook fertig geladen
18:29:41.60 UC Calls wird geladen
18:29:41.69 UC Organizer wird geladen
18:29:41.99 Organizer initiated
18:29:42.02 Database: C:\Program Files\Sony Ericsson\MyPhoneExplorer\zipcodes.mdb successfully loaded
18:29:42.26 Startpage=1
18:29:42.28 Startpage set
18:29:42.32 UC Filebrowser wird geladen
18:29:42.34 UC Filebrowser: Images werden geladen...
18:29:42.35 UC Filebrowser: Icons Haupttoolbar geladen
18:29:42.35 UC Filebrowser: Icons Detailtoolbar geladen
18:29:42.36 UC Filebrowser: Icons PLaylisttoolbar geladen
18:29:42.36 Lade Ordnericon
18:29:42.36 Lade Laufwerkicon
18:29:42.36 Lade sonstige Icons...
18:29:42.36 Lade Treeviewicons...
18:29:42.37 UC Filebrowser: Icons Listview geladen
18:29:42.37 UC Filebrowser: Sprachdaten werden geladen...
18:29:42.41 Winpreview exists=True
18:29:42.49 UC Filebrowser fertig geladen
18:29:42.49 UC AppBrowser wird geladen
18:29:42.55 UC Notes wird geladen
18:29:42.57 UC Calls wird geladen
18:29:42.83 Setting Lastuser: Sony Ericsson U1i [356810034609414]
18:29:42.87 Lade Userdatenbank: Sony Ericsson U1i [356810034609414]
18:29:42.87 GMT Einstellungen geladen
18:29:42.87 InfoSMS geladen
18:29:43.15 LoadDatafile: Phonebook.dat(14603 Bytes)
18:29:43.45 Kontakte geladen
18:29:43.54 LoadDatafile: Calls.dat(74 Bytes)
18:29:43.57 Anrufe geladen
18:29:43.63 LoadDatafile: Organizer.dat(45 Bytes)
18:29:43.63 Organizer geladen
18:29:43.65 Notizen geladen
18:29:43.67 Load SMS Data...
18:29:43.67 LoadDatafile: SMS.dat(94 Bytes)
18:29:43.67 SMS - Datenbank wird geladen...
18:29:43.67 SMS Laden - Readfile: 0 Split: 0 Parse: 0 HandleMultiSMS: 0 Nachrichten: 2
18:29:43.72 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
18:29:43.73 SMS Data Loaded...
18:29:43.73 SMS geladen
18:29:44.27 Hauptfenster fertig geladen
18:29:45.14 Refresh ComDescriptions...
18:29:45.17 PORT: COM6 Enumerator=BTHENUM Displayed=Standard Serial over Bluetooth link InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}\7&39868F94&0&000000000000_00000002
18:29:45.17 PORT: COM5 Enumerator=BTHENUM Displayed='The Doctor' Bluetooth-Port InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}\7&39868F94&0&001247344018_C00000001
18:29:45.17 MODEM: COM3 Enumerator=PCI LocationInfo=PCI bus 0, device 17, function 6 FriendlyName=Agere Systems AC'97 Modem InstanceID=PCI\VEN_1106&DEV_3068&SUBSYS_10781734&REV_80\3&61AAA01&0&8E
18:29:45.17 PORT: COM4 Enumerator=ROOT Displayed=Virtual IR COM Port InstanceID=ROOT\IRCOMM2K\0000
18:29:47.92 OK pressed in settingswindow
18:29:48.03 Set first swap of settings
18:29:48.04 Apply new holidays
18:29:48.04 Holidays applied
18:29:48.05 Second swap of settings set
18:29:48.06 Everything is done
18:29:49.13 Avaiable Ports: COM3=\Device\AgereModem5; COM4=\Device\Ircomm0; COM5=\Device\BthModem0; COM6=\Device\BthModem1;
18:29:49.13 Neue COM-Bibliothek wird verwendet
18:29:49.13 SPort Properties set, opening COM6
18:29:49.14 After OpenPort
18:29:49.14 Settimeout: RT=2000 WT=200
18:29:49.64 Port 6 wurde geöffnet !
18:29:50.04 [TX]: AT+CGSN
18:29:50.04 Systemerror: 0 [The operation completed successfully.]
18:29:50.05 Port 6 wird geschlossen
18:29:50.15 Port wurde geschlossen
18:29:50.16 Phone could not be identified
18:29:50.16 Refresh ComDescriptions...
18:29:50.17 PORT: COM6 Enumerator=BTHENUM Displayed=Standard Serial over Bluetooth link InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}\7&39868F94&0&000000000000_00000002
18:29:50.17 PORT: COM5 Enumerator=BTHENUM Displayed='The Doctor' Bluetooth-Port InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}\7&39868F94&0&001247344018_C00000001
18:29:50.18 MODEM: COM3 Enumerator=PCI LocationInfo=PCI bus 0, device 17, function 6 FriendlyName=Agere Systems AC'97 Modem InstanceID=PCI\VEN_1106&DEV_3068&SUBSYS_10781734&REV_80\3&61AAA01&0&8E
18:29:50.18 PORT: COM4 Enumerator=ROOT Displayed=Virtual IR COM Port InstanceID=ROOT\IRCOMM2K\0000
18:29:50.18 ErrMsg: Connection to phone could not be established:
Phone could not be identified
18:29:52.83 Refresh ComDescriptions...
18:29:52.84 PORT: COM6 Enumerator=BTHENUM Displayed=Standard Serial over Bluetooth link InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}\7&39868F94&0&000000000000_00000002
18:29:52.84 PORT: COM5 Enumerator=BTHENUM Displayed='The Doctor' Bluetooth-Port InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}\7&39868F94&0&001247344018_C00000001
18:29:52.84 MODEM: COM3 Enumerator=PCI LocationInfo=PCI bus 0, device 17, function 6 FriendlyName=Agere Systems AC'97 Modem InstanceID=PCI\VEN_1106&DEV_3068&SUBSYS_10781734&REV_80\3&61AAA01&0&8E
18:29:52.84 PORT: COM4 Enumerator=ROOT Displayed=Virtual IR COM Port InstanceID=ROOT\IRCOMM2K\0000

Anmeldedatum: 18.02.2010 Beiträge: 7

Installed PC Suite on my laptop here, then managed to sync via that program. Went back to MPE and that could also connect. Maybe the PC Suite installation added some drivers or something.

Anyway, it works now so thanks a lot for the assistance.

Smile

For info here is the log:

Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.5
nightly vom 16/02/2010 20:55:49
Datum: 19/02/2010

18:56:27.56 Setting Port: 24
18:56:27.56 Setting Baud: 921600
18:56:27.57 Avaiable Ports: COM3=\Device\AgereModem5; COM4=\Device\Ircomm0; COM23=\Device\USBSER000; COM24=\Device\USBSER001; COM25=\Device\USBSER002; COM26=\Device\USBSER003;
18:56:27.57 Main Load frmSplash
18:56:27.90 Load frmSplash...
18:56:27.91 Show splash...
18:56:27.99 frmSplash geladen
18:56:28.72 Hauptfenster wird geladen
18:56:28.95 Sidebar fertig geladen
18:56:28.96 Farbschema wurde gelesen
18:56:29.07 UC SMS wird geladen
18:56:29.14 UC Phonebook wird geladen
18:56:29.20 UC Phonebook fertig geladen
18:56:29.21 UC Calls wird geladen
18:56:29.25 UC Organizer wird geladen
18:56:29.39 Organizer initiated
18:56:29.42 Database: C:\Program Files\Sony Ericsson\MyPhoneExplorer\zipcodes.mdb successfully loaded
18:56:29.64 Startpage=1
18:56:29.65 Startpage set
18:56:29.66 UC Filebrowser wird geladen
18:56:29.68 UC Filebrowser: Images werden geladen...
18:56:29.69 UC Filebrowser: Icons Haupttoolbar geladen
18:56:29.69 UC Filebrowser: Icons Detailtoolbar geladen
18:56:29.70 UC Filebrowser: Icons PLaylisttoolbar geladen
18:56:29.70 Lade Ordnericon
18:56:29.70 Lade Laufwerkicon
18:56:29.70 Lade sonstige Icons...
18:56:29.71 Lade Treeviewicons...
18:56:29.71 UC Filebrowser: Icons Listview geladen
18:56:29.71 UC Filebrowser: Sprachdaten werden geladen...
18:56:29.74 Winpreview exists=True
18:56:29.82 UC Filebrowser fertig geladen
18:56:29.82 UC AppBrowser wird geladen
18:56:29.84 UC Notes wird geladen
18:56:29.86 UC Calls wird geladen
18:56:29.94 Setting Lastuser: Sony Ericsson U1i [356810034609414]
18:56:29.98 Lade Userdatenbank: Sony Ericsson U1i [356810034609414]
18:56:29.98 GMT Einstellungen geladen
18:56:29.98 InfoSMS geladen
18:56:30.14 LoadDatafile: Phonebook.dat(20692 Bytes)
18:56:30.44 Kontakte geladen
18:56:30.54 LoadDatafile: Calls.dat(74 Bytes)
18:56:30.58 Anrufe geladen
18:56:30.62 LoadDatafile: Organizer.dat(45 Bytes)
18:56:30.62 Organizer geladen
18:56:30.63 Notizen geladen
18:56:30.64 Load SMS Data...
18:56:30.64 LoadDatafile: SMS.dat(94 Bytes)
18:56:30.64 SMS - Datenbank wird geladen...
18:56:30.64 SMS Laden - Readfile: 0 Split: 0 Parse: 0 HandleMultiSMS: 0 Nachrichten: 2
18:56:30.70 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
18:56:30.70 SMS Data Loaded...
18:56:30.70 SMS geladen
18:56:31.22 Hauptfenster fertig geladen
18:56:35.97 Avaiable Ports: COM3=\Device\AgereModem5; COM4=\Device\Ircomm0; COM23=\Device\USBSER000; COM24=\Device\USBSER001; COM25=\Device\USBSER002; COM26=\Device\USBSER003;
18:56:35.97 Neue COM-Bibliothek wird verwendet
18:56:35.97 SPort Properties set, opening COM24
18:56:35.98 After OpenPort
18:56:35.98 Settimeout: RT=2000 WT=200
18:56:36.48 Port 24 wurde geöffnet !
18:56:36.49 [TX]: AT+CGSN
18:56:36.53 [RX]: AT+CGSN

18:56:36.53 [RX]: 356810034609414
18:56:36.54 [RX]: OK
18:56:36.54 Settimeout: RT=15000 WT=1000
18:56:36.55 [TX]: ATI
18:56:36.56 [RX]: ATI

18:56:36.56 [RX]: Sony Ericsson U1i
18:56:36.56 [RX]: OK
18:56:36.57 [TX]: AT+CSCS="UTF-8"
18:56:36.59 [RX]: AT+CSCS="UTF-8"

18:56:36.59 [RX]: OK
18:56:36.60 [TX]: ATI3
18:56:36.61 [RX]: ATI3

18:56:36.61 [RX]: Sony Ericsson USB WMC Modem
18:56:36.61 [RX]: OK
18:56:36.61 [TX]: AT+CNMI=2,1,0,1
18:56:36.66 [RX]: AT+CNMI=2,1,0,1

18:56:36.66 [RX]: OK
18:56:36.66 [TX]: AT*ECAM=1
18:56:36.68 [RX]: AT*ECAM=1

18:56:36.68 [RX]: OK
18:56:36.69 [TX]: AT+CIND=?
18:56:36.74 [RX]: AT+CIND=?

18:56:36.74 [RX]: +CIND: ("service",(0-1)),("call",(0-1)),("callsetup",(0-3)),("callheld",(0-2)),("signal",(0-5)),("roam",(0-1)),("battchg",(0-5)),("batterywarning",(0-1)),("chargerconnected",(0-1)),("message",(0-1))
18:56:36.76 [RX]: OK
18:56:36.76 [TX]: AT+CBC
18:56:36.78 [RX]: AT+CBC

18:56:36.78 [RX]: +CBC: 1,74
18:56:36.79 [RX]: OK
18:56:36.79 [TX]: AT+CIND?
18:56:36.86 [RX]: AT+CIND?

18:56:36.86 [RX]: +CIND: 1,0,0,0,5,0,4,0,1,0
18:56:36.87 [RX]: OK
18:56:36.88 Alle Verbindungsaktionen beendet
18:56:39.46 [TX]: AT+CBC
18:56:39.48 [RX]: AT+CBC

18:56:39.48 [RX]: +CBC: 1,74
18:56:39.49 [RX]: OK
18:56:39.55 Form_Activate fSync Operation=2
18:56:39.56 [TX]: AT*ECAM=0
18:56:39.57 [RX]: AT*ECAM=0

18:56:39.57 [RX]: OK
18:56:39.58 [TX]: AT+CCLK?
18:56:39.62 [RX]: AT+CCLK?

18:56:39.62 [RX]: +CCLK: "10/02/19,18:56:38+00"
18:56:39.64 [RX]: OK
18:56:39.65 [TX]: AT*EDST?
18:56:39.68 [RX]: AT*EDST?

18:56:39.68 [RX]: *EDST: 0
18:56:39.70 [RX]: OK
18:56:39.71 [TX]: AT+CSCA?
18:56:39.77 [RX]: AT+CSCA?

18:56:39.77 [RX]: +CSCA: "+447958879879",145
18:56:39.78 [RX]: OK
18:56:39.82 [TX]: AT+CBC
18:56:39.83 [RX]: AT+CBC

18:56:39.83 [RX]: +CBC: 1,74
18:56:39.85 [RX]: OK
18:56:39.85 OBEX OPEN COM25
18:56:39.86 OpenObexPort=True
18:56:39.86 Settimeout: RT=45000 WT=1000
18:56:39.86 OBEX Connect: 16384 Bytes Paketgröße, Target: SYNCML-SYNC
18:56:39.86 [TX]: 80 00 15 10 00 40 00 46 00 0E 53 59 4E 43 4D 4C 2D 53 59 4E 43
18:56:39.86 [RX]: A0 00 1A 10 00 FF FF CB C3 0F A5 96 4A 00 0E 53 59 4E 43 4D 4C 2D 53 59 4E 43
18:56:39.86 Connection ID:-1022384746
18:56:39.86 Paketgröße: 16384, maximal möglich:65535
18:56:39.86 Settimeout: RT=20000 WT=1000
18:56:39.86 OBEX Put: application/vnd.syncml.ds.notification DataLen=46
18:56:39.88 [TX]: 82 00 68 CB C3 0F A5 96 42 00 2A 61 70 70 6C 69 63 61 74 69 6F 6E 2F 76 6E 64 2E 73 79 6E 63 6D 6C 2E 64 73 2E 6E 6F 74 69 66 69 63 61 74 69 6F 6E 00 C3 00 00 00 2E 49 00 31 42 15 28 FF CB BE 14 15 AA 98 63 C2 8F A7 C8 A8 03 00 00 00 00 00 00 08 50 43 20 53 75 69 74 65 10 60 00 00 07 08 43 6F 6E 74 61 63 74 73
18:56:40.02 [RX]: A0 00 03
18:56:40.03 Settimeout: RT=60000 WT=1000
18:56:40.03 OBEX Get: application/vnd.syncml+wbxml
18:56:40.03 [TX]: 83 00 28 CB C3 0F A5 96 42 00 20 61 70 70 6C 69 63 61 74 69 6F 6E 2F 76 6E 64 2E 73 79 6E 63 6D 6C 2B 77 62 78 6D 6C 00
18:56:40.68 [RX]: A0 00 CF 49 00 CC 02 A4 01 6A 00 6D 6C 71 C3 03 31 2E 32 01 72 C3 0A 53 79 6E 63 4D 4C 2F 31 2E 32 01 65 C3 02 31 30 01 5B C3 01 31 01 6E 57 C3 08 50 43 20 53 75 69 74 65 01 01 67 57 C3 14 49 4D 45 49 3A 33 35 36 38 31 30 30 33 34 36 30 39 34 31 34 01 01 5A 00 01 4C C3 05 36 35 35 33 35 01 00 00 01 01 6B 46 4B C3 01 31 01 4F C3 03 32 30 30 01 54 6E 57 C3 0A 2E 2F 43 6F 6E 74 61 63 74 73 01 01 67 57 C3 10 2E 2F 43 3A 43 6F 6E 74 61 63 74 73 2E 63 64 62 01 01 5A 00 01 45 4A C3 10 32 30 31 30 30 32 31 39 54 31 38 35 34 33 32 5A 01 4F C3 10 32 30 31 30 30 32 31 39 54 31 38 35 36 33 39 5A 01 01 00 00 01 01 01 12 01 01
18:56:40.68 ObexGet Fertig, Returncode=A0
18:56:40.70 OBEX Put: application/vnd.syncml+wbxml DataLen=403
18:56:40.70 [TX]: 82 01 C3 CB C3 0F A5 96 42 00 20 61 70 70 6C 69 63 61 74 69 6F 6E 2F 76 6E 64 2E 73 79 6E 63 6D 6C 2B 77 62 78 6D 6C 00 C3 00 00 01 93 49 01 96 02 00 00 6A 1D 2D 2F 2F 53 59 4E 43 4D 4C 2F 2F 44 54 44 20 53 79 6E 63 4D 4C 20 31 2E 32 2F 2F 45 4E 6D 6C 71 C3 03 31 2E 32 01 72 C3 0A 53 79 6E 63 4D 4C 2F 31 2E 32 01 65 C3 02 31 30 01 5B C3 01 31 01 6E 57 C3 14 49 4D 45 49 3A 33 35 36 38 31 30 30 33 34 36 30 39 34 31 34 01 01 67 57 C3 08 50 43 20 53 75 69 74 65 01 01 01 6B 69 4B C3 01 31 01 5C C3 01 31 01 4C C3 01 30 01 4A C3 07 53 79 6E 63 48 64 72 01 6F C3 08 50 43 20 53 75 69 74 65 01 68 C3 14 49 4D 45 49 3A 33 35 36 38 31 30 30 33 34 36 30 39 34 31 34 01 4F C3 03 32 30 30 01 01 69 4B C3 01 32 01 5C C3 01 31 01 4C C3 01 31 01 4A C3 05 41 6C 65 72 74 01 6F C3 0A 2E 2F 43 6F 6E 74 61 63 74 73 01 68 C3 10 2E 2F 43 3A 43 6F 6E 74 61 63 74 73 2E 63 64 62 01 4F C3 03 32 30 30 01 54 4F 00 01 45 4A C3 10 32 30 31 30 30 32 31 39 54 31 38 35 34 33 32 5A 01 4F C3 10 32 30 31 30 30 32 31 39 54 31 38 35 36 33 39 5A 01 01 00 00 01 01 01 46 4B C3 01 33 01 4F C3 03 32 30 30 01 54 6E 57 C3 10 2E 2F 43 3A 43 6F 6E 74 61 63 74 73 2E 63 64 62 01 01 67 57 C3 0A 2E 2F 43 6F 6E 74 61 63 74 73 01 01 5A 00 01 45 4A C3 10 32 30 31 30 30 32 31 39 54 31 38 35 34 33 35 5A 01 4F C3 10 32 30 31 30 30 32 31 39 54 31 38 35 36 34 30 5A 01 01 01 00 00 01 01 12 01 01
18:56:40.71 [RX]: A0 00 03
18:56:40.71 OBEX Get: application/vnd.syncml+wbxml
18:56:40.71 [TX]: 83 00 28 CB C3 0F A5 96 42 00 20 61 70 70 6C 69 63 61 74 69 6F 6E 2F 76 6E 64 2E 73 79 6E 63 6D 6C 2B 77 62 78 6D 6C 00
18:56:40.72 [RX]: A0 01 53 49 01 50 02 A4 01 6A 00 6D 6C 71 C3 03 31 2E 32 01 72 C3 0A 53 79 6E 63 4D 4C 2F 31 2E 32 01 65 C3 02 31 30 01 5B C3 01 32 01 6E 57 C3 08 50 43 20 53 75 69 74 65 01 01 67 57 C3 14 49 4D 45 49 3A 33 35 36 38 31 30 30 33 34 36 30 39 34 31 34 01 01 5A 00 01 4C C3 05 36 35 35 33 35 01 00 00 01 01 6B 69 4B C3 01 31 01 5C C3 01 31 01 4C C3 01 30 01 4A C3 07 53 79 6E 63 48 64 72 01 6F C3 14 49 4D 45 49 3A 33 35 36 38 31 30 30 33 34 36 30 39 34 31 34 01 68 C3 08 50 43 20 53 75 69 74 65 01 4F C3 03 32 30 30 01 01 69 4B C3 01 32 01 5C C3 01 31 01 4C C3 01 33 01 4A C3 05 41 6C 65 72 74 01 6F C3 10 2E 2F 43 3A 43 6F 6E 74 61 63 74 73 2E 63 64 62 01 68 C3 0A 2E 2F 43 6F 6E 74 61 63 74 73 01 4F C3 03 32 30 30 01 54 4F 00 01 45 4F C3 10 32 30 31 30 30 32 31 39 54 31 38 35 36 34 30 5A 01 01 00 00 01 01 01 6A 4B C3 01 33 01 6E 57 C3 0A 2E 2F 43 6F 6E 74 61 63 74 73 01 01 67 57 C3 10 2E 2F 43 3A 43 6F 6E 74 61 63 74 73 2E 63 64 62 01 01 5A 00 01 55 C3 06 31 30 32 34 30 30 01 00 00 01 73 C3 01 30 01 01 12 01 01
18:56:40.72 ObexGet Fertig, Returncode=A0
18:56:40.75 OBEX Put: application/vnd.syncml+wbxml DataLen=295
18:56:40.75 [TX]: 82 01 57 CB C3 0F A5 96 42 00 20 61 70 70 6C 69 63 61 74 69 6F 6E 2F 76 6E 64 2E 73 79 6E 63 6D 6C 2B 77 62 78 6D 6C 00 C3 00 00 01 27 49 01 2A 02 00 00 6A 1D 2D 2F 2F 53 59 4E 43 4D 4C 2F 2F 44 54 44 20 53 79 6E 63 4D 4C 20 31 2E 32 2F 2F 45 4E 6D 6C 71 C3 03 31 2E 32 01 72 C3 0A 53 79 6E 63 4D 4C 2F 31 2E 32 01 65 C3 02 31 30 01 5B C3 01 32 01 6E 57 C3 14 49 4D 45 49 3A 33 35 36 38 31 30 30 33 34 36 30 39 34 31 34 01 01 67 57 C3 08 50 43 20 53 75 69 74 65 01 01 01 6B 69 4B C3 01 31 01 5C C3 01 32 01 4C C3 01 30 01 4A C3 07 53 79 6E 63 48 64 72 01 6F C3 08 50 43 20 53 75 69 74 65 01 68 C3 14 49 4D 45 49 3A 33 35 36 38 31 30 30 33 34 36 30 39 34 31 34 01 4F C3 03 32 30 30 01 01 69 4B C3 01 32 01 5C C3 01 32 01 4C C3 01 33 01 4A C3 04 53 79 6E 63 01 6F C3 0A 2E 2F 43 6F 6E 74 61 63 74 73 01 68 C3 10 2E 2F 43 3A 43 6F 6E 74 61 63 74 73 2E 63 64 62 01 4F C3 03 32 30 30 01 01 6A 4B C3 01 33 01 6E 57 C3 10 2E 2F 43 3A 43 6F 6E 74 61 63 74 73 2E 63 64 62 01 01 67 57 C3 0A 2E 2F 43 6F 6E 74 61 63 74 73 01 01 01 12 01 01
18:56:40.75 [RX]: A0 00 03
18:56:40.75 OBEX Get: application/vnd.syncml+wbxml
18:56:40.76 [TX]: 83 00 28 CB C3 0F A5 96 42 00 20 61 70 70 6C 69 63 61 74 69 6F 6E 2F 76 6E 64 2E 73 79 6E 63 6D 6C 2B 77 62 78 6D 6C 00
18:56:40.76 [RX]: A0 00 F2 49 00 EF 02 A4 01 6A 00 6D 6C 71 C3 03 31 2E 32 01 72 C3 0A 53 79 6E 63 4D 4C 2F 31 2E 32 01 65 C3 02 31 30 01 5B C3 01 33 01 6E 57 C3 08 50 43 20 53 75 69 74 65 01 01 67 57 C3 14 49 4D 45 49 3A 33 35 36 38 31 30 30 33 34 36 30 39 34 31 34 01 01 5A 00 01 4C C3 05 36 35 35 33 35 01 00 00 01 01 6B 69 4B C3 01 31 01 5C C3 01 32 01 4C C3 01 30 01 4A C3 07 53 79 6E 63 48 64 72 01 6F C3 14 49 4D 45 49 3A 33 35 36 38 31 30 30 33 34 36 30 39 34 31 34 01 68 C3 08 50 43 20 53 75 69 74 65 01 4F C3 03 32 30 30 01 01 69 4B C3 01 32 01 5C C3 01 32 01 4C C3 01 33 01 4A C3 04 53 79 6E 63 01 6F C3 10 2E 2F 43 3A 43 6F 6E 74 61 63 74 73 2E 63 64 62 01 68 C3 0A 2E 2F 43 6F 6E 74 61 63 74 73 01 4F C3 03 32 30 30 01 01 12 01 01
18:56:40.76 ObexGet Fertig, Returncode=A0
18:56:40.77 OBEX Put: application/vnd.syncml+wbxml DataLen=184
18:56:40.77 [TX]: 82 00 E8 CB C3 0F A5 96 42 00 20 61 70 70 6C 69 63 61 74 69 6F 6E 2F 76 6E 64 2E 73 79 6E 63 6D 6C 2B 77 62 78 6D 6C 00 C3 00 00 00 B8 49 00 BB 02 00 00 6A 1D 2D 2F 2F 53 59 4E 43 4D 4C 2F 2F 44 54 44 20 53 79 6E 63 4D 4C 20 31 2E 32 2F 2F 45 4E 6D 6C 71 C3 03 31 2E 32 01 72 C3 0A 53 79 6E 63 4D 4C 2F 31 2E 32 01 65 C3 02 31 30 01 5B C3 01 33 01 6E 57 C3 14 49 4D 45 49 3A 33 35 36 38 31 30 30 33 34 36 30 39 34 31 34 01 01 67 57 C3 08 50 43 20 53 75 69 74 65 01 01 01 6B 69 4B C3 01 31 01 5C C3 01 33 01 4C C3 01 30 01 4A C3 07 53 79 6E 63 48 64 72 01 6F C3 08 50 43 20 53 75 69 74 65 01 68 C3 14 49 4D 45 49 3A 33 35 36 38 31 30 30 33 34 36 30 39 34 31 34 01 4F C3 03 32 30 30 01 01 12 01 01
18:56:40.77 [RX]: A0 00 03
18:56:40.80 SaveDatafile: Phonebook.dat (20692 Bytes)
18:56:40.81 OBEX Disconnect
18:56:40.81 Settimeout: RT=10000 WT=1000
18:56:40.81 [TX]: 81 00 08 CB C3 0F A5 96
18:56:40.81 [RX]: A0 00 03
18:56:40.81 Disconnect hat funktioniert
18:56:40.81 Closing OBEX-Port
18:56:41.06 Settimeout: RT=15000 WT=1000
18:56:41.06 [TX]: AT*ECAM=1
18:56:41.08 [RX]: AT*ECAM=1

18:56:41.08 [RX]: OK
18:56:43.44 Refresh ComDescriptions...
18:56:43.45 MODEM: COM3 Enumerator=PCI LocationInfo=PCI bus 0, device 17, function 6 FriendlyName=Agere Systems AC'97 Modem InstanceID=PCI\VEN_1106&DEV_3068&SUBSYS_10781734&REV_80\3&61AAA01&0&8E
18:56:43.45 PORT: COM4 Enumerator=ROOT Displayed=Virtual IR COM Port InstanceID=ROOT\IRCOMM2K\0000
Very Happy

Gast

FJ hat Folgendes geschrieben:

@all: Are you able to sync the contacts with PC-Suite ?
Did you try a restart of the phone (reinsert battery) ?

Yes! Syncronization with PC-Suite is rather stable. It works

Verfasst am: Mo Feb 22, 2010 11:42

@Kira: Are you working on a 64bit-System ?

Gast

@FJ: I do not think WinXP home runs on 64bits, doesn't it?

Verfasst am: Mo Feb 22, 2010 15:40

I don't know, but i have to be sure cause the analyzing-tool does work only on 32bit-Systems

Gast

There is nothing that precise this could be a 64bits version of WinXP (if I click on Run and write winver into the box).

Informationen zum Datenschutz auf dieser Website