COM# PORT not found after re-plug usb

[Gast]

hi, noticed that i have to restart my computer once i plug the usb cable out and plug again.

there will be error stating "COULD NOT OPEN COM7!"

it works for the first time but i'll have to restart my computer if i were to access my phone again.

thanks!

Logdatei MyPhoneExplorer
************************
Programmversion: 1.6.6
Datum: 8/21/2008


01:39:44.62 Setting Port: 7
01:39:44.62 Setting Baud: 921600
01:39:44.62 Avaiable Ports: COM4=\Device\SE27mdm0; COM5=\Device\SE27mdm1; COM6=\Device\SE27obex0; COM7=\Device\SE27mgmt0;
01:39:45.03 Hauptfenster wird geladen
01:39:45.18 Sidebar fertig geladen
01:39:45.18 Farbschema wurde gelesen
01:39:45.25 UC SMS wird geladen
01:39:45.29 UC Phonebook wird geladen
01:39:45.31 UC Phonebook fertig geladen
01:39:45.32 UC Calls wird geladen
01:39:45.40 UC Organizer wird geladen
01:39:45.54 DoItemUpdate
01:39:45.57 DoItemUpdate fertig
01:39:45.57 Setcalendar True
01:39:45.59 expbar_Termine_caption_set
01:39:45.59 expbar_AUFGABEN_removed
01:39:45.60 Did the rest
01:39:45.62 SetCalendar OK
01:39:45.62 Organizer initiated
01:39:45.62 Startpage=1
01:39:45.62 Startpage set
01:39:45.62 UC Filebrowser wird geladen
01:39:45.64 UC Filebrowser: Images werden geladen...
01:39:45.64 UC Filebrowser: Icons Haupttoolbar geladen
01:39:45.65 UC Filebrowser: Icons Detailtoolbar geladen
01:39:45.65 UC Filebrowser: Icons PLaylisttoolbar geladen
01:39:45.65 Lade Ordnericon
01:39:45.65 Lade Laufwerkicon
01:39:45.65 Lade sonstige Icons...
01:39:45.65 Lade Treeviewicons...
01:39:45.65 UC Filebrowser: Icons Listview geladen
01:39:45.65 UC Filebrowser: Sprachdaten werden geladen...
01:39:45.67 Winpreview exists=True
01:39:45.68 UC Filebrowser fertig geladen
01:39:45.68 UC Notes wird geladen
01:39:45.70 UC Calls wird geladen
01:39:45.71 Setting Lastuser: Sony Ericsson K800 [354716018786437]
01:39:45.71 Lade Userdatenbank: Sony Ericsson K800 [354716018786437]
01:39:45.71 GMT Einstellungen geladen
01:39:45.73 InfoSMS geladen
01:39:45.73 Notizeintrag gesetzt
01:39:46.18 Kontakte geladen
01:39:46.25 DoItemUpdate
01:39:46.31 DoItemUpdate fertig
01:39:46.34 Organizer geladen
01:39:46.34 Notizen geladen
01:39:46.34 Load SMS Data...
01:39:46.34 SMS - Datenbank wird geladen...
01:39:46.64 SMS Laden - Readfile: 0 Split: 0 Parse: 281 HandleMultiSMS: 16 Nachrichten: 790
01:39:47.07 SMS Archiv laden - Parse: 437
01:39:48.65 RefreshList (Archive): Addrows=969 Sort=468 MenuUpdate=32 Redraw=15
01:39:48.65 SMS Data Loaded...
01:39:48.65 SMS geladen
01:39:48.71 Anrufe geladen
01:39:48.81 Hauptfenster fertig geladen
01:39:51.90 Avaiable Ports: COM4=\Device\SE27mdm0; COM5=\Device\SE27mdm1; COM6=\Device\SE27obex0; COM7=\Device\SE27mgmt0;
01:39:51.90 Kompatibilitätsmodus aktiviert!
01:39:51.90 Neue COM-Bibliothek wird verwendet
01:39:51.90 ErrMsg: Could not open COM7!

[/quote]

[FJ]

Use COM4 or COM5. COM7 is not the right port

[Gast]

oh.... thanks!! it works now.. lol. have been using COM7 for ages since it was default one..

[Evil Pete]

Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.0
Datum: 22/08/2008

22:05:52.04 Setting Port: 8
22:05:52.04 Setting Baud: 921600
22:05:52.04 Avaiable Ports: COM1=\Device\Serial0; COM2=\Device\Serial1; COM5=\Device\s116mdm0; COM6=\Device\s116mdm1; COM7=\Device\s116obex0; COM8=\Device\s116mgmt0;
22:05:52.21 frmSplash geladen
22:05:52.54 Hauptfenster wird geladen
22:05:52.68 Sidebar fertig geladen
22:05:52.68 Farbschema wurde gelesen
22:05:52.75 UC SMS wird geladen
22:05:52.81 UC Phonebook wird geladen
22:05:52.84 UC Phonebook fertig geladen
22:05:52.84 UC Calls wird geladen
22:05:52.88 UC Organizer wird geladen
22:05:52.96 DoItemUpdate
22:05:52.98 DoItemUpdate fertig
22:05:53.01 Organizer initiated
22:05:53.01 Startpage=3
22:05:53.01 Startpage set
22:05:53.01 UC Filebrowser wird geladen
22:05:53.03 UC Filebrowser: Images werden geladen...
22:05:53.04 UC Filebrowser: Icons Haupttoolbar geladen
22:05:53.04 UC Filebrowser: Icons Detailtoolbar geladen
22:05:53.04 UC Filebrowser: Icons PLaylisttoolbar geladen
22:05:53.04 Lade Ordnericon
22:05:53.04 Lade Laufwerkicon
22:05:53.04 Lade sonstige Icons...
22:05:53.04 Lade Treeviewicons...
22:05:53.04 UC Filebrowser: Icons Listview geladen
22:05:53.04 UC Filebrowser: Sprachdaten werden geladen...
22:05:53.06 Winpreview exists=True
22:05:53.07 UC Filebrowser fertig geladen
22:05:53.07 UC Notes wird geladen
22:05:53.09 UC Calls wird geladen
22:05:53.17 Setting Lastuser: Sony Ericsson K800 [359087013280015]
22:05:53.17 Lade Userdatenbank: Sony Ericsson K800 [359087013280015]
22:05:53.17 GMT Einstellungen geladen
22:05:53.17 InfoSMS geladen
22:05:53.20 Notizeintrag gesetzt
22:05:53.46 Kontakte geladen
22:05:53.48 DoItemUpdate
22:05:53.50 DoItemUpdate fertig
22:05:53.50 Organizer geladen
22:05:53.51 Notizen geladen
22:05:53.51 Load SMS Data...
22:05:53.51 SMS - Datenbank wird geladen...
22:05:53.59 SMS Laden - Readfile: 0 Split: 0 Parse: 78 HandleMultiSMS: 0 Nachrichten: 133
22:05:53.71 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
22:05:53.71 SMS Data Loaded...
22:05:53.71 SMS geladen
22:05:53.75 Anrufe geladen
22:05:53.81 Hauptfenster fertig geladen
22:05:57.12 Port 5 wird geöffnet...
22:05:57.12 Systemerror: 2 [The system cannot find the file specified.]
22:05:57.12 Port 2 wird geöffnet...
22:05:57.12 Einstellungen werden gesetzt (9600, N, 8, 1)
22:05:57.12 Puffer werden gesetzt...(8192)
22:05:57.12 Settimeout: RT=2000 WT=200
22:05:57.62 Port 2 wurde geöffnet !
22:05:57.62 Settimeout: RT=2000 WT=500
22:05:57.62 [TX]: AT+CBC
22:05:59.63 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
22:05:59.63 Port 2 wird geschlossen
22:05:59.65 Port 6 wird geöffnet...
22:05:59.65 Systemerror: 2 [The system cannot find the file specified.]
22:05:59.65 Port 1 wird geöffnet...
22:05:59.65 Einstellungen werden gesetzt (9600, N, 8, 1)
22:05:59.65 Puffer werden gesetzt...(8192)
22:05:59.65 Settimeout: RT=2000 WT=200
22:06:00.15 Port 1 wurde geöffnet !
22:06:00.15 Settimeout: RT=2000 WT=500
22:06:00.15 [TX]: AT+CBC
22:06:02.17 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
22:06:02.17 Port 1 wird geschlossen
22:06:02.18 Port 7 wird geöffnet...
22:06:02.18 Systemerror: 2 [The system cannot find the file specified.]
22:06:02.18 Port 8 wird geöffnet...
22:06:02.18 Systemerror: 2 [The system cannot find the file specified.]
22:06:11.35 Port 5 wird geöffnet...
22:06:11.35 Systemerror: 2 [The system cannot find the file specified.]
22:06:11.35 Port 2 wird geöffnet...
22:06:11.35 Einstellungen werden gesetzt (9600, N, 8, 1)
22:06:11.35 Puffer werden gesetzt...(8192)
22:06:11.35 Settimeout: RT=2000 WT=200
22:06:11.85 Port 2 wurde geöffnet !
22:06:11.85 Settimeout: RT=2000 WT=500
22:06:11.85 [TX]: AT+CBC
22:06:13.87 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
22:06:13.87 Port 2 wird geschlossen
22:06:13.88 Port 6 wird geöffnet...
22:06:13.88 Systemerror: 2 [The system cannot find the file specified.]
22:06:13.88 Port 1 wird geöffnet...
22:06:13.88 Einstellungen werden gesetzt (9600, N, 8, 1)
22:06:13.88 Puffer werden gesetzt...(8192)
22:06:13.88 Settimeout: RT=2000 WT=200
22:06:14.38 Port 1 wurde geöffnet !
22:06:14.38 Settimeout: RT=2000 WT=500
22:06:14.38 [TX]: AT+CBC
22:06:16.40 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
22:06:16.40 Port 1 wird geschlossen
22:06:16.42 Port 7 wird geöffnet...
22:06:16.42 Systemerror: 2 [The system cannot find the file specified.]
22:06:16.42 Port 8 wird geöffnet...
22:06:16.42 Systemerror: 2 [The system cannot find the file specified.]
22:07:23.92 OK pressed in settingswindow
22:07:23.95 Set first swap of settings
22:07:23.95 Apply new holidays
22:07:23.95 DoItemUpdate
22:07:23.96 DoItemUpdate fertig
22:07:23.96 Holidays applied
22:07:23.96 Second swap of settings set
22:07:23.96 Everything is done
22:07:25.54 Avaiable Ports: COM1=\Device\Serial0; COM2=\Device\Serial1; COM5=\Device\s116mdm0; COM6=\Device\s116mdm1; COM7=\Device\s116obex0; COM8=\Device\s116mgmt0;
22:07:25.54 Kompatibilitätsmodus aktiviert !
22:07:25.54 Port 8 wird geöffnet...
22:07:25.54 ErrMsg: COM8 could not be opened
Port cannot be found
22:07:26.93 Systemerror: 2 [The system cannot find the file specified.]
22:10:05.18 OK pressed in settingswindow
22:10:05.21 Set first swap of settings
22:10:05.21 Apply new holidays
22:10:05.21 DoItemUpdate
22:10:05.23 DoItemUpdate fertig
22:10:05.23 Holidays applied
22:10:05.23 Second swap of settings set
22:10:05.23 Everything is done
22:10:07.06 Avaiable Ports: COM1=\Device\Serial0; COM2=\Device\Serial1; COM5=\Device\s116mdm0; COM6=\Device\s116mdm1; COM7=\Device\s116obex0; COM8=\Device\s116mgmt0;
22:10:07.06 Port 5 wird geöffnet...
22:10:07.06 ErrMsg: COM5 could not be opened
Port cannot be found
22:10:08.90 Systemerror: 2 [The system cannot find the file specified.]
22:10:11.06 Avaiable Ports: COM1=\Device\Serial0; COM2=\Device\Serial1; COM5=\Device\s116mdm0; COM6=\Device\s116mdm1; COM7=\Device\s116obex0; COM8=\Device\s116mgmt0;
22:10:11.06 Port 5 wird geöffnet...
22:10:11.06 ErrMsg: COM5 could not be opened
Port cannot be found
22:10:12.34 Systemerror: 2 [The system cannot find the file specified.]

I have the same problem. I have to restart the PC in order to re-connect my phone.

[FJ]

In your case you should try it with reinstalling the drivers and using another USB-HUB

[Gast]

In your case you should try it with reinstalling the drivers and using another USB-HUB

Hi,

Can you review this log and find out what is happening? I selected COM4,COM5 and I got same message. Also I can clearly see that I am getting different error message that others.

Can you please help em?

Cheers
S

Code: Alles auswählen

Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.0
Datum:   25/08/2008

12:43:00.35       Setting Port: 
12:43:00.35       Setting Baud: 
12:43:00.35       Avaiable Ports: COM0=; 
12:43:01.32       frmSplash geladen
12:43:01.93       Hauptfenster wird geladen
12:43:02.15       Sidebar fertig geladen
12:43:02.15       Farbschema wurde gelesen
12:43:02.21       UC SMS wird geladen
12:43:02.29       UC Phonebook wird geladen
12:43:02.32       UC Phonebook fertig geladen
12:43:02.34       UC Calls wird geladen
12:43:02.50       UC Organizer wird geladen
12:43:02.67       DoItemUpdate
12:43:02.73       DoItemUpdate fertig
12:43:02.78       Organizer initiated
12:43:02.78       Startpage=1
12:43:02.78       Startpage set
12:43:02.78       UC Filebrowser wird geladen
12:43:02.81       UC Filebrowser: Images werden geladen...
12:43:02.81       UC Filebrowser: Icons Haupttoolbar geladen
12:43:02.82       UC Filebrowser: Icons Detailtoolbar geladen
12:43:02.82       UC Filebrowser: Icons PLaylisttoolbar geladen
12:43:02.82       Lade Ordnericon
12:43:02.82       Lade Laufwerkicon
12:43:02.82       Lade sonstige Icons...
12:43:02.82       Lade Treeviewicons...
12:43:02.84       UC Filebrowser: Icons Listview geladen
12:43:02.84       UC Filebrowser: Sprachdaten werden geladen...
12:43:02.85       Winpreview exists=True
12:43:02.88       UC Filebrowser fertig geladen
12:43:02.88       UC Notes wird geladen
12:43:02.90       UC Calls wird geladen
12:43:03.00       Setting Lastuser: 
12:43:03.00       Lade Userdatenbank: 
12:43:03.00       GMT Einstellungen geladen
12:43:03.00       InfoSMS geladen
12:43:03.04       Notizeintrag gesetzt
12:43:03.06       Kontakte geladen
12:43:03.06       Organizer geladen
12:43:03.06       Notizen geladen
12:43:03.06       SMS geladen
12:43:03.06       Anrufe geladen
12:43:03.13       Hauptfenster fertig geladen
12:44:24.73       OK pressed in settingswindow
12:44:24.87       Set first swap of settings
12:44:24.92       Apply new holidays
12:44:24.92       DoItemUpdate
12:44:24.95       DoItemUpdate fertig
12:44:24.96       Holidays applied
12:44:25.00       Second swap of settings set
12:44:25.00       Everything is done
12:44:28.82       Avaiable Ports: COM0=; 
12:44:28.82       Neue COM-Bibliothek wird verwendet
12:44:28.84       SPort Properties set, opening Port...
12:44:28.84       After OpenPort
12:44:28.84       ErrMsg: Could not open COM7!
12:44:32.17       Avaiable Ports: COM0=; 
12:44:32.17       Neue COM-Bibliothek wird verwendet
12:44:32.17       SPort Properties set, opening Port...
12:44:32.17       After OpenPort
12:44:32.17       ErrMsg: Could not open COM7!
12:44:43.70       Avaiable Ports: COM0=; 
12:44:43.70       Neue COM-Bibliothek wird verwendet
12:44:43.70       SPort Properties set, opening Port...
12:44:43.70       After OpenPort
12:44:43.70       ErrMsg: Could not open COM7!
12:45:03.98       OK pressed in settingswindow
12:45:04.17       Set first swap of settings
12:45:04.21       Apply new holidays
12:45:04.21       DoItemUpdate
12:45:04.28       DoItemUpdate fertig
12:45:04.31       Holidays applied
12:45:04.32       Second swap of settings set
12:45:04.32       Everything is done
12:45:06.76       Avaiable Ports: COM0=; 
12:45:06.76       Neue COM-Bibliothek wird verwendet
12:45:06.76       SPort Properties set, opening Port...
12:45:06.76       After OpenPort
12:45:06.76       ErrMsg: Could not open COM4!
12:45:18.90       OK pressed in settingswindow
12:45:19.06       Set first swap of settings
12:45:19.09       Apply new holidays
12:45:19.10       DoItemUpdate
12:45:19.13       DoItemUpdate fertig
12:45:19.15       Holidays applied
12:45:19.18       Second swap of settings set
12:45:19.18       Everything is done

12:45:21.09       Avaiable Ports: COM0=; 
12:45:21.09       Neue COM-Bibliothek wird verwendet
12:45:21.09       SPort Properties set, opening Port...
12:45:21.09       After OpenPort
12:45:21.09       ErrMsg: Could not open COM5!

[FJ]

Which Operating-System do you use ? There are no installed COM-ports on your System.

[theraid]

Microsoft Windows XP Media Edition.

somehow it broke.. and i'm back using COM 7 again..

i tried reinstalling all the driver but COM 4 still doesn't work. it worked only for the first time but doesn't work any more.

[Rob]

I'm having the same issue with my W890i. All works perfectly first time but after i've unplugged it, nothing seems to recognise the phone until i've rebooted:

Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.0
Datum: 01/10/2008

23:43:47.38 Setting Port: 13
23:43:47.38 Setting Baud: 115200
23:43:47.38 Avaiable Ports: COM2=\Device\Serial0; COM10=\Device\s217mdm0; COM11=\Device\s217mdm1; COM12=\Device\s217obex0; COM13=\Device\s217mgmt0;
23:43:47.60 frmSplash geladen
23:43:47.92 Hauptfenster wird geladen
23:43:48.04 Sidebar fertig geladen
23:43:48.06 Farbschema wurde gelesen
23:43:48.12 UC SMS wird geladen
23:43:48.17 UC Phonebook wird geladen
23:43:48.20 UC Phonebook fertig geladen
23:43:48.20 UC Calls wird geladen
23:43:48.26 UC Organizer wird geladen
23:43:48.35 DoItemUpdate
23:43:48.38 DoItemUpdate fertig
23:43:48.42 Organizer initiated
23:43:48.42 Startpage=1
23:43:48.42 Startpage set
23:43:48.42 UC Filebrowser wird geladen
23:43:48.43 UC Filebrowser: Images werden geladen...
23:43:48.43 UC Filebrowser: Icons Haupttoolbar geladen
23:43:48.43 UC Filebrowser: Icons Detailtoolbar geladen
23:43:48.43 UC Filebrowser: Icons PLaylisttoolbar geladen
23:43:48.43 Lade Ordnericon
23:43:48.45 Lade Laufwerkicon
23:43:48.45 Lade sonstige Icons...
23:43:48.45 Lade Treeviewicons...
23:43:48.45 UC Filebrowser: Icons Listview geladen
23:43:48.45 UC Filebrowser: Sprachdaten werden geladen...
23:43:48.46 Winpreview exists=True
23:43:48.48 UC Filebrowser fertig geladen
23:43:48.48 UC Notes wird geladen
23:43:48.48 UC Calls wird geladen
23:43:48.57 Avaiable Ports: COM2=\Device\Serial0; COM10=\Device\s217mdm0; COM11=\Device\s217mdm1; COM12=\Device\s217obex0; COM13=\Device\s217mgmt0;
23:43:48.57 Kompatibilitätsmodus aktiviert !
23:43:48.57 Neue COM-Bibliothek wird verwendet
23:43:48.57 SPort Properties set, opening Port...
23:43:48.59 After OpenPort
23:43:48.59 ErrMsg: Could not open COM13!
23:43:49.85 Setting Lastuser: Sony Ericsson W890 [352382029049471]
23:43:49.85 Lade Userdatenbank: Sony Ericsson W890 [352382029049471]
23:43:49.85 GMT Einstellungen geladen
23:43:49.85 InfoSMS geladen
23:43:49.87 Notizeintrag gesetzt
23:43:50.12 Kontakte geladen
23:43:50.18 DoItemUpdate
23:43:50.23 DoItemUpdate fertig
23:43:50.34 Organizer geladen
23:43:50.34 Notizen geladen
23:43:50.34 Load SMS Data...
23:43:50.35 SMS Archiv laden - Parse: 16
23:43:50.38 RefreshList (Archive): Addrows=15 Sort=0 MenuUpdate=0 Redraw=0
23:43:50.38 SMS Data Loaded...
23:43:50.38 SMS geladen
23:43:50.43 Anrufe geladen
23:43:51.01 Hauptfenster fertig geladen
23:43:51.23 Downloader: RC=6 BytesMax=5 BytesTMP=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt

[FJ]

Same for you - you try to access the wrong Port. Use COM10 or COM11

[Rob]

yeh, tried that. unfortunately there's something wrong with my connection. i've tried uninstalling everything, including all the drivers, and reinstalling from scratch but it still doesn't work.

there's a 'mobile device' icon that appears when i connect it which doesn't happen on my work computer so i think maybe it's something to do with that -it's not releasing something when i unplug.

as i say, i've tried complete uninstall and reinstall and still no change so, unless you have any bright ideas, i think i'll have to give up.

[FJ]

Are you using also the Mediacenter Edition ?

[Rob]

yep - is that not good!!!

[FJ]

please check the taskmanager if there is a process running with name ehtray.exe . If yes, then kill this process and try to connact again with the correct ports.

[Rob]

ok - tried it. have killed the process tree for ehtray.exe but it still won't reconnect. it did make 'noises' after the killinmg so i thought it might have worked but no...

[FJ]

Did you change also the COM-Port to a recommened one ?

[mudgutz]

I have been trying to connect my w610 to the explorer. However, only my modem is available and no USB. Is it something to do with Vista because it is able to connect on mates computer running XP... Or am I able to find what port the phone is connected to and put that in the options???

[FJ]

I think you did not install the drivers for your phone