Seite 1 von 1
Send failed !
Verfasst: Mo 18. Sep 2006, 18:12
von Gast
Hi
When trying to send smses longer than 160 characters MPE is very slow and returns the status "Send failed !". The message is sent, so it's not actually a problem. What bugs me is that MPE does not copy the message to the "sent" folder and furthermore it does not close the dialog window - the "Send" button is just replaced with a "Close" button.
Does anybody know how to solve this problem?
Using 1.4.5 on Win XP SP2 with a K600i phone.
Verfasst: Mo 18. Sep 2006, 21:12
von FJ
Hy - i think you've set the wrong COM-Port
Please read the
FAQ
If this doesn't help connect your phone to the cable , start myPhoneExplorer and post the first ten lines of the logfile here.
Verfasst: Di 19. Sep 2006, 12:36
von Peter Farsinsen
Hi
It's the same when the phone is connected via USB (COM4). When connected via bluetooth I can choose COM3 or COM5 - I've been using COM5.
The first ten lines in Debug.txt goes:
13:29:58.82 Setting Port: 4
13:29:58.82 Setting Baud: 921600
13:29:58.82 Avaiable Ports: COM3=\Device\BtPort0; COM4=\Device\k600mdm0; COM5=\Device\BtPort1; COM6=\Device\k600mdm1; COM7=\Device\k600obex0; COM8=\Device\k600mgmt0;
13:29:58.93 frmSplash geladen
13:29:59.34 Mainfenster wird geladen
13:29:59.48 Sidebar fertig geladen
13:29:59.48 Aktiviere Subclassing
13:29:59.50 UC SMS wird geladen
13:29:59.53 UC Phonebook wird geladen
13:29:59.54 UC Phonebook fertig geladen
Does that say anything?
Verfasst: Di 19. Sep 2006, 17:41
von FJ
The Port should be OK, but please try also COM6. The problem only exist if you want to send a long message or also if you want to save a long message ?
Verfasst: Di 19. Sep 2006, 23:02
von Peter Farsinsen
Hi
I can only add COM9 (don't know how to assign COM6 as serial-bt port) - should that work? Well; it dosn't...
There is no problem when saving a (large) message as draft to the phone. The problem only occures when sending.
Verfasst: Mi 20. Sep 2006, 05:46
von FJ
OK, then try once more to send a large message and then post the whole logfile here.
Verfasst: Mi 20. Sep 2006, 06:38
von Peter Farsinsen
There you go:
Logdatei MyPhoneExplorer
************************
Programmversion: 1.4.5
Datum: 20-09-2006
07:34:39.51 Setting Port: 5
07:34:39.51 Setting Baud: 921600
07:34:39.53 Avaiable Ports: COM3=\Device\BtPort0; COM5=\Device\BtPort1; COM9=\Device\BtPort2; COM10=\Device\BtModem0;
07:34:39.88 frmSplash geladen
07:34:40.78 Mainfenster wird geladen
07:34:40.93 Sidebar fertig geladen
07:34:40.93 Aktiviere Subclassing
07:34:40.98 UC SMS wird geladen
07:34:41.01 UC Phonebook wird geladen
07:34:41.03 UC Phonebook fertig geladen
07:34:41.04 UC Calls wird geladen
07:34:41.10 UC Organizer wird geladen
07:34:41.23 DoItemUpdate
07:34:41.28 DoItemUpdate fertig
07:34:41.37 UC Notes wird geladen
07:34:41.37 UC Calls wird geladen
07:34:41.43 Setting Lastuser: Sony Ericsson K600 [356572007093022]
07:34:41.43 Lade Userdatenbank: Sony Ericsson K600 [356572007093022]
07:34:41.43 GMT Einstellungen geladen
07:34:41.43 InfoSMS geladen
07:34:41.45 Notizeintrag gesetzt
07:34:41.45 Usermenü aktualisiert
07:34:41.57 Kontakte geladen
07:34:41.67 DoItemUpdate
07:34:41.71 DoItemUpdate fertig
07:34:41.76 Organizer geladen
07:34:41.76 Notizen geladen
07:34:41.76 SMS - Datenbank wird geladen...
07:34:41.81 SMS Laden - Readfile: 0 Split: 0 Parse: 47 HandleMultiSMS: 0 Nachrichten: 36
07:34:41.84 SMS geladen
07:34:41.88 Anrufe geladen
07:34:42.03 Mainfenster fertig geladen
07:34:44.00 Neue COM-Bibliothek wird verwendet
07:34:46.40 Settimeout: RT=2000 WT=200
07:34:46.90 Port 5 wurde geöffnet !
07:34:46.90 [TX]: AT+CGSN
07:34:47.03 [RX]: AT+CGSN
07:34:47.03 [RX]: 356572007093022
07:34:47.04 [RX]: OK
07:34:47.04 Settimeout: RT=10000 WT=1000
07:34:47.04 [TX]: AT+CGMI
07:34:47.07 [RX]: AT+CGMI
07:34:47.07 [RX]: Sony Ericsson
07:34:47.09 [RX]: OK
07:34:47.09 [TX]: ATI
07:34:47.12 [RX]: ATI
07:34:47.12 [RX]: Sony Ericsson K600
07:34:47.12 [RX]: OK
07:34:47.12 [TX]: AT+CSCS="UTF-8"
07:34:47.15 [RX]: AT+CSCS="UTF-8"
07:34:47.15 [RX]: OK
07:34:47.15 [TX]: AT+CNMI=2,1,0,1
07:34:47.20 [RX]: AT+CNMI=2,1,0,1
07:34:47.20 [RX]: OK
07:34:47.20 [TX]: AT*ECAM=1
07:34:47.23 [RX]: AT*ECAM=1
07:34:47.23 [RX]: OK
07:34:47.23 [TX]: AT*EVH=?
07:34:47.29 [RX]: AT*EVH=?
07:34:47.29 [RX]: OK
07:34:47.29 [TX]: AT+CBC
07:34:47.32 [RX]: AT+CBC
07:34:47.32 [RX]: +CBC: 0, 57
07:34:47.34 [RX]: OK
07:34:47.34 [TX]: AT+CSQ
07:34:47.37 [RX]: AT+CSQ
07:34:47.37 [RX]: +CSQ: 99,99
07:34:47.38 [RX]: OK
07:34:47.38 Alle Verbindungsaktionen beendet
07:34:47.38 Suche Memorystick: C:\ D:\ E:\ G:\ H:\
07:34:47.38 Suche abgeschlossen:
07:34:57.40 Settimeout: RT=1200 WT=200
07:34:57.40 [TX]: AT+CBC
07:34:57.50 [RX]: AT+CBC
07:34:57.50 [RX]: +CBC: 0, 57
07:34:57.50 [RX]: OK
07:34:57.50 [TX]: AT+CSQ
07:34:57.54 [RX]: AT+CSQ
07:34:57.54 [RX]: +CSQ: 99,99
07:34:57.54 [RX]: OK
07:35:07.54 [TX]: AT+CBC
07:35:07.63 [RX]: AT+CBC
07:35:07.63 [RX]: +CBC: 0, 57
07:35:07.65 [RX]: OK
07:35:07.65 [TX]: AT+CSQ
07:35:07.75 [RX]: AT+CSQ
07:35:07.75 [RX]: +CSQ: 99,99
07:35:07.76 [RX]: OK
07:35:17.78 [TX]: AT+CBC
07:35:17.88 [RX]: AT+CBC
07:35:17.88 [RX]: +CBC: 0, 57
07:35:17.88 [RX]: OK
07:35:17.88 [TX]: AT+CSQ
07:35:18.00 [RX]: AT+CSQ
07:35:18.00 [RX]: +CSQ: 99,99
07:35:18.00 [RX]: OK
07:35:28.01 [TX]: AT+CBC
07:35:28.12 [RX]: AT+CBC
07:35:28.12 [RX]: +CBC: 0, 57
07:35:28.12 [RX]: OK
07:35:28.12 [TX]: AT+CSQ
07:35:28.21 [RX]: AT+CSQ
07:35:28.21 [RX]: +CSQ: 99,99
07:35:28.25 [RX]: OK
07:35:38.25 [TX]: AT+CBC
07:35:38.34 [RX]: AT+CBC
07:35:38.34 [RX]: +CBC: 0, 57
07:35:38.35 [RX]: OK
07:35:38.35 [TX]: AT+CSQ
07:35:38.45 [RX]: AT+CSQ
07:35:38.45 [RX]: +CSQ: 99,99
07:35:38.46 [RX]: OK
07:35:48.57 Settimeout: RT=10000 WT=1000
07:35:48.57 [TX]: AT+CPMS="ME","ME"
07:35:48.79 [RX]: AT+CPMS="ME","ME"
07:35:48.79 [RX]: +CPMS: 37,200,37,200,37,200
07:35:48.79 [RX]: OK
07:35:48.79 Settimeout: RT=20000 WT=1000
07:35:48.79 [TX]: AT+CMGS=152
07:35:48.92 [RX]: AT+CMGS=152
07:35:48.92 [RX]: >
07:35:48.92 [TX]: 0051000881320857600000FFA00500033E0201E9E5391D442FCFE9207A794E07D1CB733A885E9ED341F4F29C0EA297E77410BD3CA783E8E5391D442FCFE9207A794E07D1CB733A885E9ED341F4F29C0EA297E77410BD3CA783E8E5391D442FCFE9207A794E07D1CB733A885E9ED341F4F29C0EA297E77410BD3CA783E8E5391D442FCFE9207A794E07D1CB733A885E9ED341F4F29C0EA297E7
07:35:51.93 [RX]: 0051000881320857600000FFA00500033E0201E9E5391D442FCFE9207A794E07D1CB733A885E9ED341F4F29C0EA297E77410BD3CA783E8E5391D442FCFE9207A794E07D1CB733A885E9ED341F4F29C0EA297E77410BD3CA783E8E5391D442FCFE9207A794E07D1CB733A885E9ED341F4F29C0EA297E77410BD3CA783E8E5391D442FCFE9207A794E07D1CB733A885E9ED341F4F29C0EA297E7
07:35:51.93 [RX]: +CMGS: 0
07:35:51.96 [RX]: OK
07:35:51.96 [TX]: AT+CMGS=152
07:35:52.07 [RX]: AT+CMGS=152
07:35:52.07 [RX]: >
07:35:52.07 [TX]: 0051000881320857600000FFA00500033E0202E9207A794E07A1CB733A085D9ED341E8F29C0E4297E77410BA3CA783D0E5391D842ECFE92074794E07A1CB733A085D9ED341E8F29C0E4297E77410BA3CA783D0E5391D842ECFE92074794E07A1CB733A085D9ED341E8F29C0E4297E77410BA3CA783D0E5391D842ECFE92074794E07A1CB733A085D9ED341E8F29C0E4297E77410BA3CA783D0
07:36:12.12 Settimeout: RT=10000 WT=1000
07:36:28.53 Settimeout: RT=1200 WT=200
07:36:28.53 [TX]: AT+CBC
07:36:28.96 [RX]: 0051000881320857600000FFA00500033E0202E9207A794E07A1CB733A085D9ED341E8F29C0E4297E77410BA3CA783D0E5391D842ECFE92074794E07A1CB733A085D9ED341E8F29C0E4297E77410BA3CA783D0E5391D842ECFE92074794E07A1CB733A085D9ED341E8F29C0E4297E77410BA3CA783D0E5391D842ECFE92074794E07A1CB733A085D9ED341E8F29C0E4297E77410BA3CA783D0AT+CBC
07:36:30.17 Port 5 wird geschlossen
07:36:33.12 Terminate Subclass
07:36:33.12 Unload Iconlib
07:36:33.12 Terminate Tray
07:36:33.12 ClosePort
07:36:33.12 Terminate: Calls
07:36:33.12 Terminate: PB
07:36:33.13 Terminate: Notes
07:36:33.13 Terminate: Organizer
07:36:33.15 Terminate: SMS
07:36:33.17 SMS - Datenbank wird gespeichert...
07:36:33.17 Form_QueryUnload -> Ende
07:36:33.17 Unload: frmSplash
07:36:33.17 Form_Unload -> Ende
Verfasst: Mi 20. Sep 2006, 12:35
von FJ
Hmm - the connection breaks down
- take the accu for two minutes out of the phone
- activate "stable connection" in the settings of MyPhoneExplorer
- connect your phone and try again
Verfasst: Mi 20. Sep 2006, 13:14
von Peter Farsinsen
I've no idea what's going on.
Came home and connected to the phone from MPE, sent a large messeage and suddenly it seems to work. Tried et out a few times - each time with success.
I the error occures again I'll try your latest advice.
Thanks for a great program and supreme support!
- Peter