FJ Software

UPDATE:Please check this tutorial: http://translate.googleusercontent.com/ ... Rltax6RCRw


UPDATE:
When using MyPhoneExplorer 1.7.0 or higher, you can just use normal Setup!

The script mentioned below was written for the special edition which was necessary to run mpe before 1.7.0. The special MPE edition is no longer on the server so the script cannot find it. Anyhow, it is useful for tasks like pairing the phone. So you can run the script, then use the normal MPE setup and install it in the same directory (~/.wine/drive_c/MyPhoneExplorer).


HowTo use MyPhoneExplorer 1.6.1 MSComm-Edition @ Linux

A user, s0l1dsnak3123, wrote a script for installing MyPhoneExplorer on GNU/Linux. The script downloads everything it needs from the internet and installs it.
It has been tested on openSuSE 10.3 and Ubuntu "Hardy Heron".
The script can be found here:
http://www.fjsoft.at/forum/forumspace/f ... ler.tar.gz

If the script doesn't work for you, you can try the previous, less comfortable, method and download and install all on your own - with the following HowTo:

There may be simpler ways,
There may be steps not necessary,
It may be not totally safe,
BUT it works!

At first: You should not think that you will be able to use every function!!

I've done every step on my notebook with:
> SuSE Linux 10.2 with Kernel 2.6.16.21-0.8 --> [www.novell.com/linux/] / [http://en.opensuse.org]
> KDE 3.5
> USB-Bluetooth Dongle
> wine 0.9.29 --> [www.winehq.com]
> MyPhoneExplorer 1.6.1 MSComm-Edition --> [www.fjsoft.at] / [www.fjsoft.at/forum/viewforum.php?f=6]
> I'm using a SE K750i

All commands with # at the beginning are done as root, all with $ as normal user.
~ means the home-path of the user.
Some names (e.g. of folders or of menus) may vary to your version because I did the hole thing on a german version, but I tried to use the english names.

Before Installing
At first of all, download the VB 6 Runtimes --> [www.google.com] / [http://www.microsoft.com/downloads/deta ... 73077ffb3c]
Then install them with the command: MyPhoneExplorer does NOT work without them!!

HowTo Install MyPhoneExplorer 1.6.1 under GNU/Linux
1. Download MyPhoneExplorer 1.6.1 MSComm-Edition --> [www.fjsoft.at/files/MyPhoneExplorer_wine.zip] (direct link)
2. Unzip the zip-file
3. Copy the folder "MyPhoneExplorer" into the "Program Files" of wine
4. Rename the "oleaut32.dll" in the folder ~/.wine/windows/system32 - e.g. into "oleaut32-alt.dll"
5. Copy "stdole2.tlb" and "oleaut32.dll" from Windows into ~/.wine/windows/system32
6. 7.

8. Then select MyPhoneExplorer.exe under "Applications", and create a new settlement for "oleaut32.dll" under "librarys". (Set to "Native (Windows)"!)
9. Close wincfg by pressing OK
10. All dlls in the MyPhoneExplorer-folder manuell registrieren. Soll heißen It should also work with the following command, but I didn't test it: 11.
Now it should already be running!

HowTo Connect Cellphone with MyPhoneExplorer using Bluetooth
There is a good website with infos around bluetooth, but it's only available in German. Sorry, but I do not know a good info-site about Bluetooth under Linux in English. --> [www.jochen-lillich.de/article/bluetooth-unter-linux]
The bluetooth-tools of Bluez should be installed in most distributions, otherwise you have install them yourself. For help see the Bluez-Site. --> [http://bluez.sourceforge.net]

Start the bluetooth-services: Then you have search for your mobile phone. For that you should turn of bluetooth at every other device, if there are any. Turn it on on your cell phone and make it visible. Then type the command: This command returns a hex-adress which should displace the "00:11:22:33:44:55" in the next command. Usually you have to do this every time after restarting. To avoid this, we change a few things in the bluetooth-config file. Therefore open the file with your common texteditor, I'm using kwrite: My rfcomm.conf (I've changed my hex-adress!):

#
# RFCOMM configuration file.
#

rfcomm0 {
# Automatically bind the device at startup
bind yes;

# Bluetooth address of the device
device 00:11:22:33:44:55;

# RFCOMM channel for the connection
channel 2;

# Description of the connection
comment "Example Bluetooth device";
}

Then you have to restart the bluetoot-services: Now we're going to link the device file with a wine device: Now it should work, but it often doesn't. So start YaST > Hardware > Bluetooth. The Bluetooth-services should be activated and you should set the security-manager to "Local PIN..." und insert a user-defined PIN.

Now the great moments comes closer: the first contact with your mobile phone: Then your phone should ask, if the incomming connection should be permitted. Say yes and if there are any other questions, say also yes. Then the phone should ask for a PIN: Now type the SAME PIN than in YaST.

HowTo Connect Cellphone with MyPhoneExplorer using USB-Cable (by Winer)

Of course, it's not necessary to use com1. The others should also work!


After all start the MPE: At the end you have to choose in the Settings "Stable Connection..."! Otherwise the phone can not be identified!!

Enjoy MyPhoneExplorer @ GNU/Linux!

2007 (c) by Weinberger Daniel

Comment from FJ
Very thanks to weinbi for this Tutorial. The developer of MyPhoneExplorer (FJ) cannot give any support for Linux/Wine. If you have questions or problems then this can be only answered by free Linux-Users which visit this forum.

Great !!!
I will try this, Thanks for your help

I've done until step 9, then I get error message : failed to load <name>.dll. any suggestion pls! I'm using Ubuntu feisty and wine 0.9.33 on laptop LenovoY400.. anyone success run MPE on Ubuntu ?

HowTo Connect Cellphone with MyPhoneExplorer using USB-Cable (by Winer)
All work o.k. but not com port to usb worked

Brand new Ubuntu 7.10 and wine. Help !

O.K. solved
must put com1 manual and then conect (no automatic search)

It rocks. Thanks ever so much. My K800i sonny ericsson is happy.

Here some more guidance to whoever trying.
I have just one question, can the newer versions (not on com1)
work under linux? If yes how (what dll to add and how to setuo the usb)

Mandriva 2007.1 32 bits kernel 2.6.17-16mdv on an i686
$ kded --version Qt: 3.3.8 KDE: 3.5.6
$ wine --version wine-0.9.33
MyPhoneExplorer 1.6.1 MSComm-Edition --> [www.fjsoft.at] /
[www.fjsoft.at/forum/viewforum.php?f=6]
http://www.fjsoft.at/files/MyPhoneExplorer_wine.zip
This version is important because it communicate on com1. I am not sure I understand german but it looks like other version use COM16 or whatever and the ole library may work differently or whatever, so the instructions works only for MyPhoneExplorer 1.6.1 and the file is called MyPhoneExplorer_wine.zip

you may need unzip to extract oleaut32.zip

http://www.dll-files.com/dllindex/dll-f ... l?oleaut32
I looked at this one as well but was the same I already add; maybe worth
checking for you:
http://www.dll-files.com/dllindex/dll-f ... l?msvbvm60

http://www.ascentive.com/support/new/su ... TDOLE2.TLB

http://appdb.winehq.org/objectManager.p ... n&iId=5416

wine VB6.0-KB290887-X86.exe
You need to choose a path. I do not know what is best. I chose
/home/username/.wine/some_drive_c/windows
there you should now see vbrun60sp6.exe

dll instalation: I found out I needed the ocx as well
$ cd /home/username/.wine/some_drive_c/Program\ Files/MyPhoneExplorer/DLL/
Note: drive_c is called whatever you chose to call it, maybe just C
then
for i in *.dll; do wine regsvr32 $i; done; for i in *.ocx; do wine regsvr32
$i; done;
then
cd..
wine MyPhoneExplorer.exe
F2 (options), then 3rd menu from the top, then on the right choose the
language, then F4 to exit.
Language will now be English; you need to restart application for that to be implemented.

When to connect the mobile phone (USB connection)?
First switch on mobile (Yes!)
Then start MyphoneExplorer
ls -l /home/username/.wine/dosdevices/
You should see this flashing or red color or whatever telling you it is not
connected
com1 -> /dev/ttyACM0
$ ls -l /dev/ttyAC*
ls: /dev/ttyAC*: No such file or directory
Plug the USB cable into computer, the mobile comes up with icones
If you look at the log as root
# tail -f /var/log/syslog you should see
kernel: ohci_hcd 0000:00:02.0: wakeup
kernel: usb 1-3: new full speed USB device using ohci_hcd and address 6
kernel: usb 1-3: configuration #3 chosen from 1 choice
kernel: cdc_acm 1-3:3.1: ttyACM0: USB ACM device
kernel: cdc_acm 1-3:3.3: ttyACM1: USB ACM device
and
# lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 006: ID 0fce:d039 Sony Ericsson Mobile Communications AB
Bus 001 Device 001: ID 0000:0000
If you do not see that switch off phone, unplug, start phone, plug phone
you can see two lines output from
$ ls -l /dev/ttyAC*
If you do not you have a problem.

Important DO choose the "phone mode", press select on the phone
Now start
wine MyPhoneExplorer.exe
Press F2 options, type COM1 choose a baud rate of 115200, press OK
Important "search for device" does not work, do not worry
Press F1, I did get phone could not be ID if I did not choose "Stable
connection" it worked.

The debug output is
Hauptfenster fertig geladen
DoItemUpdate
DoItemUpdate fertig
Avaiable Ports: COM0=;
Settimeout: RT=2000 WT=200
Port 1 wurde geöffnet !
[TX]: AT+CGSN
ErrMsg: Phone could not be identified
Port 1 wird geschlossen

Here some more guidance to whoever trying.
I have just one question, can the newer versions (not on com1)
work under linux? If yes how (what dll to add and how to setuo the usb)

The Windows-Version contains a library which is not compatible with wine - the wine-version uses another library. Its not binded to COM1 or COM16. With the stable connection you can open all avaiable COM-Ports.

Thanks for all the help here - I've now got this version of MyPhoneExplorer working in Wine and syncing with my K750. The only thing that doesn't work is getting calendars from Google Calendar - it crashes when I put my username/password in and then try to download the list of my calendars. Any idea of how to get this working? The error messages returned are: The second line (beginning fixme:toolbar) was repeated many times. I'm using Ubuntu 7.04 if that's any help.

I can see there's an option in MyPhoneExplorer to open a iCal file over a network - but Google doesn't support authenticated access to calendars, and I really don't want to share my private calendar with everyone.

I've also got MyPhoneExplorer running inside a virtual installation of Windows 2000 (using Innotek VirtualBox), and when I try to do the same thing it crashes too!

At first: You should not think that you will be able to use every function!!

Maybe it depends on the MSXML-library provided from Wine.

Easy workaround found! Although trying to sync the phone with Google Calendar directly crashes the app, Google helpfully provide private iCal feeds for each calendar, which MPE imports just fine. I've submitted a report on this app to the Wine application database, and it should show up at http://appdb.winehq.org/objectManager.p ... n&iId=5416 fairly soon. I've given it status Silver: "Applications with minor issues that do not affect typical usage".

at end of installation i just get a a splash screen and nothing happens

jay@jay-laptop:~/.wine/drive_c/Program Files/MyPhoneExplorer$ sudo wine MyPhoneExplorer.exe
err:ole:CoGetClassObject class {167066b3-693a-44b0-afb4-422380ff940d} not registered
err:ole:CoGetClassObject class {167066b3-693a-44b0-afb4-422380ff940d} not registered
err:ole:CoGetClassObject no class object {167066b3-693a-44b0-afb4-422380ff940d} could be created for context 0x3
err:ole:CoGetClassObject class {167066b3-693a-44b0-afb4-422380ff940d} not registered
err:ole:CoGetClassObject class {167066b3-693a-44b0-afb4-422380ff940d} not registered
err:ole:CoGetClassObject no class object {167066b3-693a-44b0-afb4-422380ff940d} could be created for context 0x3


is the log from terminal

while registering i was not able to register iconlib.dll

please help
thanks

i am also not sure if vb6 run time is installed as the above command just causes it to extract at some place giving another exe
and when i try to run it i get following error
jay@jay-laptop:~/.wine$ sudo wine /home/jay/.wine/drive_c/Program\ Files/vbrun60sp6.exe
fixme:setupapi:SetupDefaultQueueCallbackW notification 262144 params 33f754,0
err:setupapi:SetupDefaultQueueCallbackW copy error 0 L"C:\\windows\\temp\\IXP000.TMP\\OLEAUT32.DLL" -> L"c:\\windows\\system32\\OLEAUT32.DLL"
fixme:setupapi:SetupDefaultQueueCallbackW notification 262144 params 33f754,0
err:setupapi:SetupDefaultQueueCallbackW copy error 0 L"C:\\windows\\temp\\IXP000.TMP\\OLEPRO32.DLL" -> L"c:\\windows\\system32\\OLEPRO32.DLL"
fixme:ole:DllRegisterServer stub

after some struggle i managed install the app
no error i get is 'phone not identified'
i am using usb cable to connect it

K got it working from usb cable
Millions thanks for this tutorial

The Windows-Version contains a library which is not compatible with wine - the wine-version uses another library.

FJ, does this mean we could use the current version of MPE and just overwrite the library with the one packaged in the zip file mentioned above? Or does the library get updated with each release?

Here's Hoping!

Ed.

No - this would be too easy
I have to rewrite many things to make this Wine-Compatible Versions.
I think its enought if i make after every major-release a wine-version.

I think it's more than enough that you take the time to make a Wine-compatible version at all!

Thanks for your response.

Ed.

I'd like to say thanks as well - I haven't found anything as easy to use as MPE for my K750, and I'm more likely to stay with SonyEricsson because of it. My virtualized instance of Windows crashed when I tried to synchronize my phone's calendar with GCalendar, but the Wine version is very steady so far.

Well, I thought I'd give this a go...

I'm running wine v 0.9.46 on Ubuntu 7.10. I got as far as installing the vb6 runtime patch. I run the command and get prompted with a licence agreement, which I accept. Then it asks where I want the files extracted. Once extracted, I run the .exe it spits out and get the following:
I seem to have fallen at the first hurdle, but any help anyone can provide would be greatly appreciated!

Cheers,

Ed.

My K550im can not be identified ... and i'm in stable mode.

My K550im can not be identified ... and i'm in stable mode.

same problem here with w200i, I see it's plugged in with
ls -l /dev/ttyAC*
(it's red when unplugged, black when plugged in)
I've manually set it to COM1, 115200, stable connection

still, when I press F1, ti writes:

"COM1 could not be opened
Acces denied"


anyone knows how to fix it?