Completion Error Message After File Upload to Replace File

Anmeldedatum: 08.09.2008 Beiträge: 29 Wohnort: Invercargill, New Zealand

If the file exists on the phone and you try an upload to replace it you get the message:

Error during upload: Filename
Completion Error: - 2147024713

Paul
--------------------
MPE-version: 1.7.1 - nightly 3 Dec 08
Type of connection: USB
Model: P990i
Firmware version: Phone R9GA001 Org R6E28
Windows version: WinXP-SP2

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 32104 Wohnort: Tirol

I tried this also on my P1i - normally MPE overwrites an existing file. Has the file which is already on the phone any special flags (writeprotected, hidden, systemfile)?

Anmeldedatum: 08.09.2008 Beiträge: 29 Wohnort: Invercargill, New Zealand

I have tried this with a number of different types of files. None are write-protected, hidden or system.

If I upload a file from my PC to the phone then make a change to the same file on my PC and try and upload it again I get the error message.

Paul

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 32104 Wohnort: Tirol

Please post the logfile after the error. I cannot reproduce it on my PC so i hope that i can see something helpfully in the logfile.

Anmeldedatum: 08.09.2008 Beiträge: 29 Wohnort: Invercargill, New Zealand

Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.1
nightly vom 12:00:00 a.m.
Datum: 12/12/2008

07:03:52.79 Setting Port: 6
07:03:52.79 Setting Baud: 921600
07:03:52.79 Avaiable Ports: COM1=\Device\Serial0; COM3=\Device\AgereModem5; COM6=\Device\zebrmdm0; COM7=\Device\zebrmdm1; COM8=\Device\zebrsce0; COM12=\Device\BthModem1; COM13=\Device\BthModem0;
07:03:54.94 Hauptfenster wird geladen
07:03:55.57 Sidebar fertig geladen
07:03:55.58 Farbschema wurde gelesen
07:03:55.80 UC SMS wird geladen
07:03:55.92 UC Phonebook wird geladen
07:03:56.00 UC Phonebook fertig geladen
07:03:56.01 UC Calls wird geladen
07:03:56.10 UC Organizer wird geladen
07:03:56.33 DoItemUpdate
07:03:56.41 DoItemUpdate fertig
07:03:56.51 Organizer initiated
07:03:56.51 Startpage=3
07:03:56.52 Startpage set
07:03:56.52 UC Filebrowser wird geladen
07:03:56.54 UC Filebrowser: Images werden geladen...
07:03:56.56 UC Filebrowser: Icons Haupttoolbar geladen
07:03:56.57 UC Filebrowser: Icons Detailtoolbar geladen
07:03:56.58 UC Filebrowser: Icons PLaylisttoolbar geladen
07:03:56.58 Lade Ordnericon
07:03:56.58 Lade Laufwerkicon
07:03:56.59 Lade sonstige Icons...
07:03:56.59 Lade Treeviewicons...
07:03:56.59 UC Filebrowser: Icons Listview geladen
07:03:56.60 UC Filebrowser: Sprachdaten werden geladen...
07:03:56.66 Winpreview exists=True
07:03:56.69 UC Filebrowser fertig geladen
07:03:56.69 UC Notes wird geladen
07:03:56.72 UC Calls wird geladen
07:03:56.95 Avaiable Ports: COM1=\Device\Serial0; COM3=\Device\AgereModem5; COM6=\Device\zebrmdm0; COM7=\Device\zebrmdm1; COM8=\Device\zebrsce0; COM12=\Device\BthModem1; COM13=\Device\BthModem0;
07:03:56.95 Neue COM-Bibliothek wird verwendet
07:03:56.95 SPort Properties set, opening Port...
07:03:56.97 After OpenPort
07:03:56.97 Settimeout: RT=2000 WT=200
07:03:57.47 Port 6 wurde geöffnet !
07:03:58.49 [TX]: AT+CGSN
07:03:58.49 ReadPort...
07:03:58.54 [RX]: AT+CGSN

07:03:58.54 [RX]: 359593005901203
07:03:58.56 [RX]: OK
07:03:58.56 Response found, Datacount=33
07:03:58.56 ReadPort dolastactions
07:03:58.56 ReadPort ende
07:03:58.57 Settimeout: RT=15000 WT=1000
07:03:58.58 [TX]: ATI
07:03:58.58 ReadPort...
07:03:58.62 [RX]: ATI

07:03:58.62 [RX]: Sony Ericsson P990i
07:03:58.63 [RX]: OK
07:03:58.63 Response found, Datacount=33
07:03:58.63 ReadPort dolastactions
07:03:58.63 ReadPort ende
07:03:58.65 [TX]: AT+CSCS="UTF-8"
07:03:58.65 ReadPort...
07:03:58.73 [RX]: AT+CSCS="UTF-8"

07:03:58.73 [RX]: OK
07:03:58.74 Response found, Datacount=22
07:03:58.74 ReadPort dolastactions
07:03:58.74 ReadPort ende
07:03:58.75 [TX]: ATI3
07:03:58.75 ReadPort...
07:03:58.80 [RX]: ATI3

07:03:58.80 [RX]: Sony Ericsson USB WMC Modem
07:03:58.80 [RX]: OK
07:03:58.81 Response found, Datacount=42
07:03:58.81 ReadPort dolastactions
07:03:58.81 ReadPort ende
07:03:58.82 [TX]: AT+CNMI=2,1,0,1
07:03:58.82 ReadPort...
07:03:58.91 [RX]: AT+CNMI=2,1,0,1

07:03:58.91 [RX]: OK
07:03:58.91 Response found, Datacount=22
07:03:58.91 ReadPort dolastactions
07:03:58.91 ReadPort ende
07:03:58.93 [TX]: AT*ECAM=1
07:03:58.93 ReadPort...
07:03:58.99 [RX]: AT*ECAM=1

07:03:58.99 [RX]: OK
07:03:58.99 Response found, Datacount=16
07:03:58.99 ReadPort dolastactions
07:03:58.99 ReadPort ende
07:03:58.99 [TX]: AT*EVH=?
07:03:59.00 ReadPort...
07:03:59.08 [RX]: AT*EVH=?

07:03:59.08 [RX]: ERROR
07:03:59.08 Response found, Datacount=18
07:03:59.08 ReadPort dolastactions
07:03:59.08 ReadPort ende
07:03:59.09 [TX]: AT+CBC
07:03:59.09 ReadPort...
07:03:59.15 [RX]: AT+CBC

07:03:59.15 [RX]: +CBC: 1, 100
07:03:59.16 [RX]: OK
07:03:59.16 Response found, Datacount=29
07:03:59.16 ReadPort dolastactions
07:03:59.16 ReadPort ende
07:03:59.16 [TX]: AT+CSQ
07:03:59.16 ReadPort...
07:03:59.20 [RX]: AT+CSQ

07:03:59.20 [RX]: +CSQ: 99,99
07:03:59.20 [RX]: OK
07:03:59.20 Response found, Datacount=28
07:03:59.20 ReadPort dolastactions
07:03:59.21 ReadPort ende
07:03:59.21 Alle Verbindungsaktionen beendet
07:03:59.22 [TX]: AT+CSCA?
07:03:59.22 ReadPort...
07:04:00.45 [RX]: AT+CSCA?

07:04:00.45 [RX]: +CSCA: "6421600600",145
07:04:00.47 [RX]: OK
07:04:00.47 Response found, Datacount=42
07:04:00.47 ReadPort dolastactions
07:04:00.47 ReadPort ende
07:04:00.49 DoItemUpdate
07:04:00.53 DoItemUpdate fertig
07:04:00.54 Lade Userdatenbank: Sony Ericsson P990i [359593005901203]
07:04:00.54 GMT Einstellungen geladen
07:04:00.55 InfoSMS geladen
07:04:03.70 Kontakte geladen
07:04:03.74 DoItemUpdate
07:04:03.79 DoItemUpdate fertig
07:04:03.79 Organizer geladen
07:04:04.48 Notizen geladen
07:04:04.49 Load SMS Data...
07:04:04.54 SMS - Datenbank wird geladen...
07:04:05.60 SMS Laden - Readfile: 50 Split: 10 Parse: 1042 HandleMultiSMS: 10 Nachrichten: 584
07:04:05.65 SMS Archiv laden - Parse: 50
07:04:06.41 RefreshList (Archive): Addrows=70 Sort=10 MenuUpdate=10 Redraw=0
07:04:06.41 SMS Data Loaded...
07:04:06.41 SMS geladen
07:04:07.25 Anrufe geladen
07:04:07.25 Suche Memorystick: C:\ D:\ E:\ L:\ P:\ Q:\ S:\ W:\
07:04:07.25 Suche abgeschlossen:
07:04:07.61 Hauptfenster fertig geladen
07:04:08.84 Downloader: RC=6 BytesMax=5 BytesTMP=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
07:04:17.26 Settimeout: RT=1500 WT=800
07:04:17.26 [TX]: AT+CBC
07:04:17.26 ReadPort...
07:04:17.32 [RX]: AT+CBC

07:04:17.32 [RX]: +CBC: 1, 100
07:04:17.34 [RX]: OK
07:04:17.34 Response found, Datacount=29
07:04:17.34 ReadPort dolastactions
07:04:17.34 ReadPort ende
07:04:17.34 [TX]: AT+CSQ
07:04:17.34 ReadPort...
07:04:17.40 [RX]: AT+CSQ

07:04:17.40 [RX]: +CSQ: 99,99
07:04:17.42 [RX]: OK
07:04:17.42 Response found, Datacount=28
07:04:17.42 ReadPort dolastactions
07:04:17.42 ReadPort ende
07:04:26.51 ListItem Click, -2
07:04:28.91 ListItem Click, -2
07:04:35.42 ListItem Click, -1
07:04:37.43 [TX]: AT+CBC
07:04:37.43 ReadPort...
07:04:37.49 [RX]: AT+CBC

07:04:37.49 [RX]: +CBC: 1, 100
07:04:37.51 [RX]: OK
07:04:37.51 Response found, Datacount=29
07:04:37.51 ReadPort dolastactions
07:04:37.51 ReadPort ende
07:04:37.51 [TX]: AT+CSQ
07:04:37.51 ReadPort...
07:04:37.57 [RX]: AT+CSQ

07:04:37.57 [RX]: +CSQ: 99,99
07:04:37.57 [RX]: OK
07:04:37.57 Response found, Datacount=28
07:04:37.57 ReadPort dolastactions
07:04:37.58 ReadPort ende
07:04:47.58 [TX]: AT+CBC
07:04:47.58 ReadPort...
07:04:47.64 [RX]: AT+CBC

07:04:47.64 [RX]: +CBC: 1, 100
07:04:47.66 [RX]: OK
07:04:47.66 Response found, Datacount=29
07:04:47.66 ReadPort dolastactions
07:04:47.66 ReadPort ende
07:04:47.67 [TX]: AT+CSQ
07:04:47.67 ReadPort...
07:04:47.72 [RX]: AT+CSQ

07:04:47.72 [RX]: +CSQ: 99,99
07:04:47.74 [RX]: OK
07:04:47.74 Response found, Datacount=28
07:04:47.74 ReadPort dolastactions
07:04:47.74 ReadPort ende
07:04:52.96 Settimeout: RT=15000 WT=1000
07:04:52.97 [TX]: AT*ECAM=0
07:04:52.97 ReadPort...
07:04:53.03 [RX]: AT*ECAM=0

07:04:53.03 [RX]: OK
07:04:53.03 Response found, Datacount=16
07:04:53.03 ReadPort dolastactions
07:04:53.03 ReadPort ende
07:04:55.49 ErrMsg: Error during upload: Tramps & Climbs.MoStack
Completion Error: -2147024713
07:05:01.90 Dateitransferfenster entladen
07:05:04.84 [TX]: AT*ECAM=1
07:05:04.84 ReadPort...
07:05:04.91 [RX]: AT*ECAM=1

07:05:04.91 [RX]: OK
07:05:04.91 Response found, Datacount=16
07:05:04.91 ReadPort dolastactions
07:05:04.91 ReadPort ende
07:05:07.75 Settimeout: RT=1500 WT=800
07:05:07.75 [TX]: AT+CBC
07:05:07.75 ReadPort...
07:05:07.81 [RX]: AT+CBC

07:05:07.81 [RX]: +CBC: 1, 100
07:05:07.82 [RX]: OK
07:05:07.82 Response found, Datacount=29
07:05:07.82 ReadPort dolastactions
07:05:07.82 ReadPort ende
07:05:07.83 [TX]: AT+CSQ
07:05:07.83 ReadPort...
07:05:07.88 [RX]: AT+CSQ

07:05:07.88 [RX]: +CSQ: 99,99
07:05:07.90 [RX]: OK
07:05:07.90 Response found, Datacount=28
07:05:07.90 ReadPort dolastactions
07:05:07.90 ReadPort ende
07:05:17.91 [TX]: AT+CBC
07:05:17.91 ReadPort...
07:05:17.97 [RX]: AT+CBC

07:05:17.97 [RX]: +CBC: 1, 100
07:05:17.99 [RX]: OK
07:05:17.99 Response found, Datacount=29
07:05:17.99 ReadPort dolastactions
07:05:18.00 ReadPort ende
07:05:18.00 [TX]: AT+CSQ
07:05:18.00 ReadPort...
07:05:18.06 [RX]: AT+CSQ

07:05:18.06 [RX]: +CSQ: 99,99
07:05:18.07 [RX]: OK
07:05:18.07 Response found, Datacount=28
07:05:18.07 ReadPort dolastactions
07:05:18.07 ReadPort ende
07:05:28.07 [TX]: AT+CBC
07:05:28.07 ReadPort...
07:05:28.13 [RX]: AT+CBC

07:05:28.13 [RX]: +CBC: 1, 100
07:05:28.13 [RX]: OK
07:05:28.13 Response found, Datacount=29
07:05:28.13 ReadPort dolastactions
07:05:28.14 ReadPort ende
07:05:28.14 [TX]: AT+CSQ
07:05:28.14 ReadPort...
07:05:28.18 [RX]: AT+CSQ

07:05:28.18 [RX]: +CSQ: 99,99
07:05:28.20 [RX]: OK
07:05:28.20 Response found, Datacount=28
07:05:28.20 ReadPort dolastactions
07:05:28.20 ReadPort ende
07:05:38.21 [TX]: AT+CBC
07:05:38.21 ReadPort...
07:05:38.29 [RX]: AT+CBC

07:05:38.29 [RX]: +CBC: 1, 100
07:05:38.31 [RX]: OK
07:05:38.34 Response found, Datacount=29
07:05:38.34 ReadPort dolastactions
07:05:38.35 ReadPort ende
07:05:38.35 [TX]: AT+CSQ
07:05:38.35 ReadPort...
07:05:38.40 [RX]: AT+CSQ

07:05:38.40 [RX]: +CSQ: 99,99
07:05:38.44 [RX]: OK
07:05:38.46 Response found, Datacount=28
07:05:38.46 ReadPort dolastactions
07:05:38.46 ReadPort ende
07:05:48.46 [TX]: AT+CBC
07:05:48.46 ReadPort...
07:05:48.52 [RX]: AT+CBC

07:05:48.52 [RX]: +CBC: 1, 100
07:05:48.53 [RX]: OK
07:05:48.53 Response found, Datacount=29
07:05:48.53 ReadPort dolastactions
07:05:48.53 ReadPort ende
07:05:48.53 [TX]: AT+CSQ
07:05:48.53 ReadPort...
07:05:48.59 [RX]: AT+CSQ

07:05:48.59 [RX]: +CSQ: 99,99
07:05:48.61 [RX]: OK
07:05:48.61 Response found, Datacount=28
07:05:48.61 ReadPort dolastactions
07:05:48.61 ReadPort ende
07:05:58.63 [TX]: AT+CBC
07:05:58.63 ReadPort...
07:05:58.68 [RX]: AT+CBC

07:05:58.68 [RX]: +CBC: 1, 100
07:05:58.70 [RX]: OK
07:05:58.70 Response found, Datacount=29
07:05:58.70 ReadPort dolastactions
07:05:58.70 ReadPort ende
07:05:58.71 [TX]: AT+CSQ
07:05:58.71 ReadPort...
07:05:58.77 [RX]: AT+CSQ

07:05:58.77 [RX]: +CSQ: 99,99
07:05:58.78 [RX]: OK
07:05:58.78 Response found, Datacount=28
07:05:58.78 ReadPort dolastactions
07:05:58.79 ReadPort ende
07:06:08.79 [TX]: AT+CBC
07:06:08.79 ReadPort...
07:06:08.86 [RX]: AT+CBC

07:06:08.86 [RX]: +CBC: 1, 100
07:06:08.88 [RX]: OK
07:06:08.88 Response found, Datacount=29
07:06:08.88 ReadPort dolastactions
07:06:08.88 ReadPort ende
07:06:08.88 [TX]: AT+CSQ
07:06:08.88 ReadPort...
07:06:08.94 [RX]: AT+CSQ

07:06:08.94 [RX]: +CSQ: 99,99
07:06:08.96 [RX]: OK
07:06:08.96 Response found, Datacount=28
07:06:08.96 ReadPort dolastactions
07:06:08.96 ReadPort ende
07:06:18.97 [TX]: AT+CBC
07:06:18.97 ReadPort...
07:06:19.02 [RX]: AT+CBC

07:06:19.02 [RX]: +CBC: 1, 100
07:06:19.04 [RX]: OK
07:06:19.04 Response found, Datacount=29
07:06:19.04 ReadPort dolastactions
07:06:19.04 ReadPort ende
07:06:19.04 [TX]: AT+CSQ
07:06:19.04 ReadPort...
07:06:19.10 [RX]: AT+CSQ

07:06:19.10 [RX]: +CSQ: 99,99
07:06:19.12 [RX]: OK
07:06:19.12 Response found, Datacount=28
07:06:19.12 ReadPort dolastactions
07:06:19.12 ReadPort ende
07:06:29.12 [TX]: AT+CBC
07:06:29.12 ReadPort...
07:06:29.18 [RX]: AT+CBC

07:06:29.18 [RX]: +CBC: 1, 100
07:06:29.20 [RX]: OK
07:06:29.20 Response found, Datacount=29
07:06:29.20 ReadPort dolastactions
07:06:29.20 ReadPort ende
07:06:29.21 [TX]: AT+CSQ
07:06:29.21 ReadPort...
07:06:29.27 [RX]: AT+CSQ

07:06:29.27 [RX]: +CSQ: 99,99
07:06:29.28 [RX]: OK
07:06:29.28 Response found, Datacount=28
07:06:29.28 ReadPort dolastactions
07:06:29.28 ReadPort ende
07:06:39.29 [TX]: AT+CBC
07:06:39.29 ReadPort...
07:06:39.34 [RX]: AT+CBC

07:06:39.34 [RX]: +CBC: 1, 100
07:06:39.36 [RX]: OK
07:06:39.36 Response found, Datacount=29
07:06:39.36 ReadPort dolastactions
07:06:39.36 ReadPort ende
07:06:39.36 [TX]: AT+CSQ
07:06:39.36 ReadPort...
07:06:39.41 [RX]: AT+CSQ

07:06:39.41 [RX]: +CSQ: 99,99
07:06:39.43 [RX]: OK
07:06:39.43 Response found, Datacount=28
07:06:39.43 ReadPort dolastactions
07:06:39.43 ReadPort ende
07:06:49.52 [TX]: AT+CBC
07:06:49.52 ReadPort...
07:06:49.66 [RX]: AT+CBC

07:06:49.66 [RX]: +CBC: 1, 100
07:06:49.66 [RX]: OK
07:06:49.73 Response found, Datacount=29
07:06:49.73 ReadPort dolastactions
07:06:49.73 ReadPort ende
07:06:49.73 [TX]: AT+CSQ
07:06:49.73 ReadPort...
07:06:49.80 [RX]: AT+CSQ

07:06:49.80 [RX]: +CSQ: 99,99
07:06:49.80 [RX]: OK
07:06:49.80 Response found, Datacount=28
07:06:49.80 ReadPort dolastactions
07:06:49.81 ReadPort ende
07:06:59.81 [TX]: AT+CBC
07:06:59.81 ReadPort...
07:06:59.97 [RX]: AT+CBC

07:06:59.97 [RX]: +CBC: 1, 100
07:06:59.98 [RX]: OK
07:07:00.04 Response found, Datacount=29
07:07:00.04 ReadPort dolastactions
07:07:00.04 ReadPort ende
07:07:00.05 [TX]: AT+CSQ
07:07:00.05 ReadPort...
07:07:00.11 [RX]: AT+CSQ

07:07:00.11 [RX]: +CSQ: 99,99
07:07:00.13 [RX]: OK
07:07:00.13 Response found, Datacount=28
07:07:00.13 ReadPort dolastactions
07:07:00.13 ReadPort ende

Verfasst am: Di Jul 14, 2009 05:43

I still get the completion error message when trying to replace a file that already exists on the phone. However if I set up file synch between PC and phone then the file is replaced with no completion error message.

Verfasst am: Di Jul 14, 2009 07:41

Sorry, on my P1i it works.
The filetransfer s done throught a third-party library. Not directly throught MyPhoneExplorer. Cause of this i can only advice to do a file-action but i cannot control if there errors appear or not.

After the errormessage: Is the file replaced or not ? The routines for filesync are the same, but on filesync the errormessages are made silent.

Verfasst am: Di Jul 14, 2009 07:48

After the error message the file is not replaced on the phone.

Informationen zum Datenschutz auf dieser Website