FJ Software

I'm posting here because I had problems connecting in the past and now it just seems near impossible.

Phone: K300i
OS: Windows 2000
Connection: Infrared USB stick
MPE version: 1.7

What I did ?

Installed SE PC Suite for Windows 2000. Only COM1 and COM2 appear in hardware so I don't know if any drivers were installed. The phone appears on wireless link though and I can send files to it.

I tried connecting with MPE but it won't recognize any phone on any of the COM ports from 3 onwards. It used to work on COM4.

I've tried everything in the FAQ and have restarted the computer many times. I've removed the battery on the phone several times too.

Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.0
Datum: 25/09/2008

00:57:36.84 Setting Port: 5
00:57:36.84 Setting Baud: 921600
00:57:36.84 Avaiable Ports: COM1=\Device\Serial0; COM2=\Device\Serial1;
00:57:37.04 frmSplash geladen
00:57:37.21 Hauptfenster wird geladen
00:57:37.31 Sidebar fertig geladen
00:57:37.31 Farbschema wurde gelesen
00:57:37.37 UC SMS wird geladen
00:57:37.40 UC Phonebook wird geladen
00:57:37.43 UC Phonebook fertig geladen
00:57:37.43 UC Calls wird geladen
00:57:37.48 UC Organizer wird geladen
00:57:37.56 DoItemUpdate
00:57:37.57 DoItemUpdate fertig
00:57:37.59 Organizer initiated
00:57:37.59 Startpage=1
00:57:37.59 Startpage set
00:57:37.59 UC Filebrowser wird geladen
00:57:37.59 UC Filebrowser: Images werden geladen...
00:57:37.60 UC Filebrowser: Icons Haupttoolbar geladen
00:57:37.60 UC Filebrowser: Icons Detailtoolbar geladen
00:57:37.60 UC Filebrowser: Icons PLaylisttoolbar geladen
00:57:37.60 Lade Ordnericon
00:57:37.60 Lade Laufwerkicon
00:57:37.60 Lade sonstige Icons...
00:57:37.60 Lade Treeviewicons...
00:57:37.60 UC Filebrowser: Icons Listview geladen
00:57:37.60 UC Filebrowser: Sprachdaten werden geladen...
00:57:37.62 Winpreview exists=False
00:57:37.63 UC Filebrowser fertig geladen
00:57:37.63 UC Notes wird geladen
00:57:37.63 UC Calls wird geladen
00:57:37.67 Setting Lastuser: K300 series [357909004363009]
00:57:37.67 Lade Userdatenbank: K300 series [357909004363009]
00:57:37.67 GMT Einstellungen geladen
00:57:37.67 InfoSMS geladen
00:57:37.68 Notizeintrag gesetzt
00:57:37.85 Kontakte geladen
00:57:37.87 DoItemUpdate
00:57:37.88 DoItemUpdate fertig
00:57:37.88 Organizer geladen
00:57:37.88 Notizen geladen
00:57:37.88 Load SMS Data...
00:57:37.88 SMS - Datenbank wird geladen...
00:57:37.88 SMS Laden - Readfile: 0 Split: 0 Parse: 0 HandleMultiSMS: 0 Nachrichten: 2
00:57:37.90 Fehler beim Parsen des Archivs: Error=13 Data=...
00:57:37.95 RefreshList (Archive): Addrows=15 Sort=16 MenuUpdate=0 Redraw=0
00:57:37.95 SMS Data Loaded...
00:57:37.95 SMS geladen
00:57:37.98 Anrufe geladen
00:57:38.03 Hauptfenster fertig geladen
00:57:38.12 Downloader: RC=6 BytesMax=5 BytesTMP=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
00:58:54.26 Avaiable Ports: COM1=\Device\Serial0; COM2=\Device\Serial1;
00:58:54.26 Neue COM-Bibliothek wird verwendet
00:58:54.26 SPort Properties set, opening Port...
00:58:54.28 After OpenPort
00:58:54.28 ErrMsg: Could not open COM5!
00:59:04.04 OK pressed in settingswindow
00:59:04.04 Set first swap of settings
00:59:04.06 Apply new holidays
00:59:04.06 DoItemUpdate
00:59:04.06 DoItemUpdate fertig
00:59:04.07 Holidays applied
00:59:04.07 Second swap of settings set
00:59:04.07 Everything is done
00:59:06.00 Avaiable Ports: COM1=\Device\Serial0; COM2=\Device\Serial1;
00:59:06.00 Neue COM-Bibliothek wird verwendet
00:59:06.00 SPort Properties set, opening Port...
00:59:06.00 After OpenPort
00:59:06.00 ErrMsg: Could not open COM4!
00:59:09.51 Port 1 wird geöffnet...
00:59:09.51 Einstellungen werden gesetzt (9600, N, 8, 1)
00:59:09.51 Puffer werden gesetzt...(8192)
00:59:09.51 Settimeout: RT=2000 WT=200
00:59:10.01 Port 1 wurde geöffnet !
00:59:10.01 Settimeout: RT=2000 WT=500
00:59:10.01 [TX]: AT+CBC
00:59:12.03 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
00:59:12.09 Port 1 wird geschlossen
00:59:12.15 Port 2 wird geöffnet...
00:59:12.15 Einstellungen werden gesetzt (9600, N, 8, 1)
00:59:12.15 Puffer werden gesetzt...(8192)
00:59:12.15 Settimeout: RT=2000 WT=200
00:59:12.65 Port 2 wurde geöffnet !
00:59:12.65 Settimeout: RT=2000 WT=500
00:59:12.65 [TX]: AT+CBC
00:59:14.65 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
00:59:14.65 Port 2 wird geschlossen

00:59:06.00 Avaiable Ports: COM1=\Device\Serial0; COM2=\Device\Serial1;

COM1 and COM2 are physical ports, the never work. I tried IR on WinXP and on my computer the PC installed a new modemdriver for the phone. There was nothing to set up - it worked automatically. Please check your devicemanager. If the phone is linked to the PC there should be a entry of your Phone in "Modems".

Hi FJ,

FJ hat geschrieben:Please check your devicemanager. If the phone is linked to the PC there should be a entry of your Phone in "Modems".

I'm testing this right now. The usb stick is detected as USB-Infrared Adapter #5. No branch for modems though (I used router for net access).

Are any special drivers installed along with PC Suite or should I try something else ?

The Modem should appear if you bring your phone in range. It has directly nothing to do with the IR-Adapter. The Adapter is only needed for Transport. I know some good instructions to set up COM-Ports for IR in alternative ways but its completly in german. I don't know if this would help you

FJ Software

Can't connect on any COM port

Can't connect on any COM port