FJ Software

hy
i can't send sms with MPE on my P1i
it's working great on all other phones but P1i. every time i try to send an sms MPE tries to, and i can hear on my speakers that some data IS trying to get trough, but the sms can't be sent. everything else works great (including SMS sync and saving SMS messages) but it's just incapable of sending an sms. do you know what could be the problem?
here's the log:

Code: Alles auswählen

Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.0
Datum:   9.9.2008

16:21:14.20       Setting Port: 13
16:21:14.20       Setting Baud: 921600
16:21:14.20       Avaiable Ports: COM1=\Device\Serial0; COM13=\Device\zebrmdm0; COM14=\Device\zebrmdm1; COM15=\Device\zebrsce0; 
16:21:15.37       frmSplash geladen
16:21:15.93       Hauptfenster wird geladen
16:21:16.07       Sidebar fertig geladen
16:21:16.07       Farbschema wurde gelesen
16:21:16.13       UC SMS wird geladen
16:21:16.18       UC Phonebook wird geladen
16:21:16.20       UC Phonebook fertig geladen
16:21:16.20       UC Calls wird geladen
16:21:16.23       UC Organizer wird geladen
16:21:16.29       DoItemUpdate
16:21:16.32       DoItemUpdate fertig
16:21:16.35       Organizer initiated
16:21:16.35       Startpage=3
16:21:16.35       Startpage set
16:21:16.35       UC Filebrowser wird geladen
16:21:16.37       UC Filebrowser: Images werden geladen...
16:21:16.37       UC Filebrowser: Icons Haupttoolbar geladen
16:21:16.37       UC Filebrowser: Icons Detailtoolbar geladen
16:21:16.38       UC Filebrowser: Icons PLaylisttoolbar geladen
16:21:16.38       Lade Ordnericon
16:21:16.38       Lade Laufwerkicon
16:21:16.38       Lade sonstige Icons...
16:21:16.38       Lade Treeviewicons...
16:21:16.38       UC Filebrowser: Icons Listview geladen
16:21:16.38       UC Filebrowser: Sprachdaten werden geladen...
16:21:16.38       Winpreview exists=True
16:21:16.40       UC Filebrowser fertig geladen
16:21:16.40       UC Notes wird geladen
16:21:16.42       UC Calls wird geladen
16:21:16.51       Avaiable Ports: COM1=\Device\Serial0; COM13=\Device\zebrmdm0; COM14=\Device\zebrmdm1; COM15=\Device\zebrsce0; 
16:21:16.51       Neue COM-Bibliothek wird verwendet
16:21:16.51       SPort Properties set, opening Port...
16:21:16.53       After OpenPort
16:21:16.53       Settimeout: RT=2000 WT=200
16:21:17.03       Port 13 wurde geöffnet !
16:21:17.03 [TX]: AT+CGSN
16:21:17.09 [RX]: AT+CGSN

16:21:17.09 [RX]: 357033016724924
16:21:17.10 [RX]: OK
16:21:17.10       Settimeout: RT=15000 WT=1000
16:21:17.10 [TX]: ATI
16:21:17.15 [RX]: ATI

16:21:17.15 [RX]: Sony Ericsson P1i
16:21:17.17 [RX]: OK
16:21:17.18 [TX]: AT+CSCS="UTF-8"
16:21:17.23 [RX]: AT+CSCS="UTF-8"

16:21:17.23 [RX]: OK
16:21:17.23 [TX]: ATI3
16:21:17.26 [RX]: ATI3

16:21:17.26 [RX]: Sony Ericsson USB WMC Modem
16:21:17.28 [RX]: OK
16:21:17.28 [TX]: AT+CNMI=2,1,0,1
16:21:17.35 [RX]: AT+CNMI=2,1,0,1

16:21:17.35 [RX]: OK
16:21:17.35 [TX]: AT*ECAM=1
16:21:17.42 [RX]: AT*ECAM=1

16:21:17.42 [RX]: OK
16:21:17.42 [TX]: AT*EVH=?
16:21:17.50 [RX]: AT*EVH=?

16:21:17.50 [RX]: ERROR
16:21:17.50 [TX]: AT+CBC
16:21:17.68 [RX]: AT+CBC

16:21:17.68 [RX]: +CBC: 1, 99
16:21:17.70 [RX]: OK
16:21:17.70 [TX]: AT+CSQ
16:21:17.76 [RX]: AT+CSQ

16:21:17.76 [RX]: +CSQ: 25,99
16:21:17.78 [RX]: OK
16:21:17.78       Alle Verbindungsaktionen beendet
16:21:17.78 [TX]: AT+CSCA?
16:21:18.93 [RX]: AT+CSCA?

16:21:18.93 [RX]: +CSCA: "385980501",145
16:21:18.96 [RX]: OK
16:21:18.98       DoItemUpdate
16:21:19.00       DoItemUpdate fertig
16:21:19.00       Lade Userdatenbank: Sony Ericsson P1i [357033016724924]
16:21:19.00       GMT Einstellungen geladen
16:21:19.00       InfoSMS geladen
16:21:19.04       Notizeintrag gesetzt
16:21:19.53       Kontakte geladen
16:21:19.56       DoItemUpdate
16:21:19.56       DoItemUpdate fertig
16:21:19.57       Organizer geladen
16:21:19.59       Notizen geladen
16:21:19.59       Load SMS Data...
16:21:19.59       SMS - Datenbank wird geladen...
16:21:20.04       SMS Laden  - Readfile: 0 Split: 0 Parse: 437 HandleMultiSMS: 16 Nachrichten: 1555
16:21:20.28       RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
16:21:20.28       SMS Data Loaded...
16:21:20.28       SMS geladen
16:21:20.78       Anrufe geladen
16:21:20.78       Suche Memorystick: C:\ D:\ E:\ I:\ J:\ K:\ L:\
16:21:20.78       Suche abgeschlossen: 
16:21:20.82       Hauptfenster fertig geladen
16:21:30.43 [TX]: AT+CPMS="ME","ME"
16:21:30.51 [RX]: AT+CPMS="ME","ME"

16:21:30.51 [RX]: +CPMS: "ME",1,512,"ME",1,512,"ME",1,512
16:21:30.54 [RX]: OK
16:21:30.54       Settimeout: RT=30000 WT=1000
16:21:30.56 [TX]: AT+CMGS=17
16:21:30.60 [RX]: AT+CMGS=17

16:21:30.60 [RX]: > 
16:21:30.60 [TX]: 0011000A8190984543220000FF04F4F29C0E
16:21:34.10 [RX]: 0011000A8190984543220000FF04F4F29C0E
16:21:34.10 [RX]: +CMS ERROR: 500
16:21:44.10 [TX]: AT+CMGS=17
16:21:44.15 [RX]: AT+CMGS=17

16:21:44.15 [RX]: > 
16:21:44.15 [TX]: 0011000A8190984543220000FF04F4F29C0E
16:21:47.75 [RX]: 0011000A8190984543220000FF04F4F29C0E
16:21:47.75 [RX]: +CMS ERROR: 500
16:21:47.75       ErrMsg: CMS ERROR: 500 - Unknown Error
16:21:48.73       Settimeout: RT=10000 WT=1000

oh and btw, why is the "ping sms" option removed from version 1.7.0? it was so great!

thank you for any help concerning this

Can you send messages with the phone itself ?
Did you already tried a restart of your phone ?
Is it possible to test it with another SIM-Card in your P1i ?

Ping-SMS was removed for Symbian-Phones cause i cannot get delivery-reports with this devices.

hey
thank you for your answer

i am having this problem for a long time now (even before version 1.7) - i can send sms normally with my phone and i tried restarting it many times AND with a different SIM, so i don't suppose that's the problem

the wierd thing is that, as i said already, i can hear the "td-td-td" sound on my speakers when i try to send an sms, so MPE IS doing something, but the SMS apearantly can never get trough for some reason

Did you tried it ever with "fLoats Mobile Agent" ? I'm wondering if it works with this software. Maybe a special PDU-Parameter raise the problem.

just tried it. i can't send an sms with that software to

Hmm, did you ever tried a firmwareupgrade ?

Check sms setting, if GPRS is preffered, set it to GSM, worked just fine for me.

Same thing here (M600i), set to GSM and it works.

FJ Software

CMS Error 500 on P1i

CMS Error 500 on P1i