FJ Software

Hello I am having the same problem connection to my phone. Its keeps saying "Obox Protocol Could not be initialized! OBEX Error: ERROR"

Any answers to why this is happening please? Its probably to do with my COM Port??

Below is the Logfile:

Logdatei MyPhoneExplorer
************************
Programmversion: 1.6.7
Datum: 6/13/2008


22:28:42.01 Setting Port:
22:28:42.01 Setting Baud:
22:28:42.07 Avaiable Ports: COM1=\Device\Serial0; COM3=Winachsf0;
22:28:43.01 frmSplash geladen
22:28:45.35 Hauptfenster wird geladen
22:28:45.78 Sidebar fertig geladen
22:28:45.81 Farbschema wurde gelesen
22:28:46.10 UC SMS wird geladen
22:28:46.31 UC Phonebook wird geladen
22:28:46.37 UC Phonebook fertig geladen
22:28:46.37 UC Calls wird geladen
22:28:46.57 UC Organizer wird geladen
22:28:46.81 DoItemUpdate
22:28:46.82 DoItemUpdate fertig
22:28:46.82 Setcalendar True
22:28:46.82 expbar_Termine_caption_set
22:28:46.84 expbar_AUFGABEN_removed
22:28:46.84 Did the rest
22:28:46.85 SetCalendar OK
22:28:46.85 Organizer initiated
22:28:46.85 Startpage=1
22:28:46.85 Startpage set
22:28:46.96 UC Filebrowser wird geladen
22:28:47.06 UC Filebrowser: Images werden geladen...
22:28:47.07 UC Filebrowser: Icons Haupttoolbar geladen
22:28:47.09 UC Filebrowser: Icons Detailtoolbar geladen
22:28:47.09 UC Filebrowser: Icons PLaylisttoolbar geladen
22:28:47.09 Lade Ordnericon
22:28:47.09 Lade Laufwerkicon
22:28:47.09 Lade sonstige Icons...
22:28:47.09 Lade Treeviewicons...
22:28:47.09 UC Filebrowser: Icons Listview geladen
22:28:47.10 UC Filebrowser: Sprachdaten werden geladen...
22:28:47.15 Winpreview exists=True
22:28:47.25 UC Filebrowser fertig geladen
22:28:47.25 UC Notes wird geladen
22:28:47.26 UC Calls wird geladen
22:28:48.21 Setting Lastuser:
22:28:48.23 Lade Userdatenbank:
22:28:48.23 GMT Einstellungen geladen
22:28:48.23 InfoSMS geladen
22:28:48.25 Notizeintrag gesetzt
22:28:48.31 Kontakte geladen
22:28:48.31 Organizer geladen
22:28:48.31 Notizen geladen
22:28:48.31 SMS geladen
22:28:48.31 Anrufe geladen
22:28:48.43 Hauptfenster fertig geladen
22:29:13.40 Port 1 wird geöffnet...
22:29:13.48 Einstellungen werden gesetzt (9600, N, 8, 1)
22:29:13.48 Puffer werden gesetzt...(8192)
22:29:13.48 Settimeout: RT=2000 WT=200
22:29:13.98 Port 1 wurde geöffnet!
22:29:14.79 Settimeout: RT=2000 WT=500
22:29:14.79 [TX]: AT+CBC
22:29:16.79 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
22:29:16.79 Port 1 wird geschlossen
22:29:16.81 Port 3 wird geöffnet...
22:29:17.15 Einstellungen werden gesetzt (9600, N, 8, 1)
22:29:17.15 Puffer werden gesetzt...(8192)
22:29:17.15 Settimeout: RT=2000 WT=200
22:29:17.65 Port 3 wurde geöffnet!
22:29:17.65 Settimeout: RT=2000 WT=500
22:29:17.65 [TX]: AT+CBC
22:29:17.68 [RX]: ERROR
22:29:20.18 Settimeout: RT=15000 WT=1000
22:29:20.20 [TX]: AT*EOBEX
22:29:20.20 [RX]: ERROR
22:29:20.20 [TX]: AT+CPROT=0
22:29:20.20 [RX]: ERROR
22:29:20.20 ErrMsg: Obex Protocol could not be initialized!
OBEX Error: ERROR
22:42:14.90 [TX]: AT+CPROT=0
22:42:14.92 [RX]: ERROR
22:42:14.92 ErrMsg: Obex Protocol could not be initialized!
OBEX Error: ERROR


Thanks guys.

You can use the Search function.

Otherwise:
Which OS do you use?
Which connection type?
Have you read the FAQ?

In the logfile you try to access your Internet-Modem. I think did not install the drivers for your USB-cable.

Hello Guys,

sorry so how do i install the drivers for your USB-cable to see if that might work so i can connect to my K800i?

Thanks

a) You could install the pc-suite. The drivers will be installed with it.
b) You can try to translate this FAQ (using an online translator or something)