FJ Software

After upgrading my K850i to new firmware R1EA031 I am not able to connect to MyPhoneExplorer 1.6.6 any more. Message: Phone could not be identified.

When I check "stable connection" phone can be connected but no data could be downloaded. Program hangs up on downloading. On the phone there is a message that the connection is terminated.

Help please. I will be lost without it!

Log file:
Programmversion: 1.6.6
Datum: 12.04.2008


20:30:43.79 Setting Port: 30
20:30:43.79 Setting Baud: 921600
20:30:43.79 Avaiable Ports: COM1=\Device\Serial0; COM3=Winachsf0;
20:30:43.87 frmSplash geladen
20:30:44.37 Hauptfenster wird geladen
20:30:47.03 Sidebar fertig geladen
20:30:47.03 Farbschema wurde gelesen
20:30:47.12 UC SMS wird geladen
20:30:47.17 UC Phonebook wird geladen
20:30:47.20 UC Phonebook fertig geladen
20:30:47.20 UC Calls wird geladen
20:30:47.26 UC Organizer wird geladen
20:30:47.37 DoItemUpdate
20:30:47.38 DoItemUpdate fertig
20:30:47.38 Setcalendar True
20:30:47.38 expbar_Termine_caption_set
20:30:47.40 expbar_AUFGABEN_removed
20:30:47.42 Did the rest
20:30:47.43 SetCalendar OK
20:30:47.45 Organizer initiated
20:30:47.45 Startpage=1
20:30:47.45 Startpage set
20:30:47.45 UC Filebrowser wird geladen
20:30:47.46 UC Filebrowser: Images werden geladen...
20:30:47.48 UC Filebrowser: Icons Haupttoolbar geladen
20:30:47.48 UC Filebrowser: Icons Detailtoolbar geladen
20:30:47.48 UC Filebrowser: Icons PLaylisttoolbar geladen
20:30:47.48 Lade Ordnericon
20:30:47.48 Lade Laufwerkicon
20:30:47.48 Lade sonstige Icons...
20:30:47.48 Lade Treeviewicons...
20:30:47.48 UC Filebrowser: Icons Listview geladen
20:30:47.48 UC Filebrowser: Sprachdaten werden geladen...
20:30:47.50 Winpreview exists=True
20:30:47.53 UC Filebrowser fertig geladen
20:30:47.53 UC Notes wird geladen
20:30:47.54 UC Calls wird geladen
20:30:47.60 Setting Lastuser: Sony Ericsson K850 [351829021300527]
20:30:47.60 Lade Userdatenbank: Sony Ericsson K850 [351829021300527]
20:30:47.60 GMT Einstellungen geladen
20:30:47.62 InfoSMS geladen
20:30:47.62 Notizeintrag gesetzt
20:30:47.65 Kontakte geladen
20:30:47.67 DoItemUpdate
20:30:47.68 DoItemUpdate fertig
20:30:47.68 Organizer geladen
20:30:47.68 Notizen geladen
20:30:47.68 Load SMS Data...
20:30:47.70 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
20:30:47.70 SMS Data Loaded...
20:30:47.70 SMS geladen
20:30:47.70 Anrufe geladen
20:30:47.92 Hauptfenster fertig geladen
20:30:48.17 Downloader: RC=6 BytesMax=5 BytesTMP=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt

Installed new beta release.
Now phone can connect, but not able do downoload data from phonebook.
Logfile follows:

Programmversion: 1.6.7
Datum: 12.04.2008


22:44:26.95 Setting Port: 26
22:44:26.95 Setting Baud: 921600
22:44:26.95 Avaiable Ports: COM1=\Device\Serial0; COM3=Winachsf0;
22:44:27.07 frmSplash geladen
22:44:27.73 Hauptfenster wird geladen
22:44:30.48 Sidebar fertig geladen
22:44:30.48 Farbschema wurde gelesen
22:44:30.60 UC SMS wird geladen
22:44:30.67 UC Phonebook wird geladen
22:44:30.70 UC Phonebook fertig geladen
22:44:30.70 UC Calls wird geladen
22:44:30.84 UC Organizer wird geladen
22:44:30.98 DoItemUpdate
22:44:31.01 DoItemUpdate fertig
22:44:31.01 Setcalendar True
22:44:31.03 expbar_Termine_caption_set
22:44:31.03 expbar_AUFGABEN_removed
22:44:31.04 Did the rest
22:44:31.06 SetCalendar OK
22:44:31.06 Organizer initiated
22:44:31.06 Startpage=1
22:44:31.07 Startpage set
22:44:31.09 UC Filebrowser wird geladen
22:44:31.10 UC Filebrowser: Images werden geladen...
22:44:31.12 UC Filebrowser: Icons Haupttoolbar geladen
22:44:31.12 UC Filebrowser: Icons Detailtoolbar geladen
22:44:31.13 UC Filebrowser: Icons PLaylisttoolbar geladen
22:44:31.13 Lade Ordnericon
22:44:31.13 Lade Laufwerkicon
22:44:31.13 Lade sonstige Icons...
22:44:31.13 Lade Treeviewicons...
22:44:31.13 UC Filebrowser: Icons Listview geladen
22:44:31.13 UC Filebrowser: Sprachdaten werden geladen...
22:44:31.17 Winpreview exists=True
22:44:31.20 UC Filebrowser fertig geladen
22:44:31.20 UC Notes wird geladen
22:44:31.21 UC Calls wird geladen
22:44:31.29 Setting Lastuser: Sony Ericsson W910 [351558029599000]
22:44:31.29 Lade Userdatenbank: Sony Ericsson W910 [351558029599000]
22:44:31.29 GMT Einstellungen geladen
22:44:31.29 InfoSMS geladen
22:44:31.31 Notizeintrag gesetzt
22:44:31.98 Kontakte geladen
22:44:32.12 DoItemUpdate
22:44:32.15 DoItemUpdate fertig
22:44:32.21 Organizer geladen
22:44:32.21 Notizen geladen
22:44:32.21 Load SMS Data...
22:44:32.21 SMS - Datenbank wird geladen...
22:44:32.56 SMS Laden - Readfile: 0 Split: 0 Parse: 344 HandleMultiSMS: 0 Nachrichten: 372
22:44:32.70 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
22:44:32.70 SMS Data Loaded...
22:44:32.70 SMS geladen
22:44:32.79 Anrufe geladen
22:44:33.03 Hauptfenster fertig geladen
22:44:33.21 Downloader: RC=6 BytesMax=5 BytesTMP=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
22:44:51.34 COM30.
22:44:54.12 COM31.
22:44:54.79 COM32.
22:44:55.09 COM33.
22:45:19.67 Port 30 wird geöffnet...
22:45:19.67 Einstellungen werden gesetzt (9600, N, 8, 1)
22:45:19.67 Puffer werden gesetzt...(8192)
22:45:19.67 Settimeout: RT=2000 WT=200
22:45:20.17 Port 30 wurde geöffnet!
22:45:20.17 Settimeout: RT=2000 WT=500
22:45:20.17 [TX]: AT+CBC
22:45:22.17 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
22:45:22.18 Port 30 wird geschlossen
22:45:22.18 Port 3 wird geöffnet...
22:45:22.51 Einstellungen werden gesetzt (9600, N, 8, 1)
22:45:22.51 Puffer werden gesetzt...(8192)
22:45:22.51 Settimeout: RT=2000 WT=200
22:45:23.01 Port 3 wurde geöffnet!
22:45:23.03 Settimeout: RT=2000 WT=500
22:45:23.03 [TX]: AT+CBC
22:45:23.03 [RX]: ERROR
22:45:23.03 Port 3 wird geschlossen
22:45:23.04 Port 31 wird geöffnet...
22:45:23.04 Einstellungen werden gesetzt (9600, N, 8, 1)
22:45:23.04 Puffer werden gesetzt...(8192)
22:45:23.04 Settimeout: RT=2000 WT=200
22:45:23.54 Port 31 wurde geöffnet!
22:45:23.56 Settimeout: RT=2000 WT=500
22:45:23.56 [TX]: AT+CBC
22:45:23.56 [RX]: AT+CBC
22:45:23.56 [RX]: +CBC: 1, 100
22:45:23.56 [RX]: OK
22:45:23.57 Settimeout: RT=15000 WT=1000
22:45:23.57 [TX]: ATI
22:45:38.57 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
22:45:38.65 Port 31 wird geschlossen
22:45:38.65 Port 1 wird geöffnet...
22:45:38.65 Einstellungen werden gesetzt (9600, N, 8, 1)
22:45:38.65 Puffer werden gesetzt...(8192)
22:45:38.65 Settimeout: RT=2000 WT=200
22:45:39.15 Port 1 wurde geöffnet!
22:45:39.17 Settimeout: RT=2000 WT=500
22:45:39.17 [TX]: AT+CBC
22:45:41.17 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
22:45:41.17 Port 1 wird geschlossen
22:45:41.18 Port 32 wird geöffnet...
22:45:41.21 Einstellungen werden gesetzt (9600, N, 8, 1)
22:45:41.21 Puffer werden gesetzt...(8192)
22:45:41.21 Settimeout: RT=2000 WT=200
22:45:41.71 Port 32 wurde geöffnet!
22:45:41.73 Settimeout: RT=2000 WT=500
22:45:41.73 [TX]: AT+CBC
22:45:43.73 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
22:45:43.73 Port 32 wird geschlossen
22:45:43.75 Port 33 wird geöffnet...
22:45:43.75 Einstellungen werden gesetzt (9600, N, 8, 1)
22:45:43.75 Puffer werden gesetzt...(8192)
22:45:43.75 Settimeout: RT=2000 WT=200
22:45:44.25 Port 33 wurde geöffnet!
22:45:44.25 Settimeout: RT=2000 WT=500
22:45:44.25 [TX]: AT+CBC
22:45:44.26 [RX]: AT+CBC
22:45:44.26 [RX]: +CBC: 1, 100
22:45:44.26 [RX]: OK
22:45:44.26 Settimeout: RT=15000 WT=1000
22:45:44.26 [TX]: ATI
22:45:44.28 [RX]: ATI
22:45:44.28 [RX]: Sony Ericsson K850
22:45:44.28 [RX]: OK
22:45:44.28 [TX]: AT*EOBEX
22:45:44.29 [RX]: AT*EOBEX
22:45:44.29 [RX]: ERROR
22:45:44.29 [TX]: AT+CPROT=0
22:45:44.31 [RX]: AT+CPROT=0
22:45:44.31 [RX]: CONNECT
22:45:44.31 OBEX Connect: 4096 Bytes Paketgröße, Target:
22:45:44.31 [TX]: 80 00 07 10 00 10 00
22:45:44.34 [RX]: A0 00 07 10 00 30 00
22:45:44.34 Connection ID:0
22:45:44.34 Paketgröße: 4096, maximal möglich:12288
22:45:44.34 OBEX Disconnect
22:45:44.34 [TX]: 81 00 03
22:45:44.35 [RX]: A0 00 03
22:45:44.35 Disconnect hat funktioniert
22:45:44.35 Lese noch den OK-String
22:45:44.35 [RX]: OK
22:45:44.35 Port 33 wird geschlossen
22:45:44.35 Port 33 wird geöffnet...
22:45:44.37 Einstellungen werden gesetzt (19200, N, 8, 1)
22:45:44.37 Puffer werden gesetzt...(8192)
22:45:44.37 Settimeout: RT=2000 WT=200
22:45:44.87 Port 33 wurde geöffnet!
22:45:44.87 Settimeout: RT=2000 WT=100
22:45:44.88 [TX]: AT+CBC
22:45:44.88 [RX]: AT+CBC
22:45:44.88 [RX]: +CBC: 1, 100
22:45:44.90 [RX]: OK
22:45:44.90 Port 33 wird geschlossen
22:45:44.90 Port 33 wird geöffnet...
22:45:44.90 Einstellungen werden gesetzt (115200, N, 8, 1)
22:45:44.90 Puffer werden gesetzt...(8192)
22:45:44.90 Settimeout: RT=2000 WT=200
22:45:45.40 Port 33 wurde geöffnet!
22:45:45.42 Settimeout: RT=2000 WT=100
22:45:45.42 [TX]: AT+CBC
22:45:45.43 [RX]: AT+CBC
22:45:45.43 [RX]: +CBC: 1, 100
22:45:45.43 [RX]: OK
22:45:45.43 Port 33 wird geschlossen
22:45:45.45 Port 33 wird geöffnet...
22:45:45.45 Einstellungen werden gesetzt (256000, N, 8, 1)
22:45:45.45 Puffer werden gesetzt...(8192)
22:45:45.45 Settimeout: RT=2000 WT=200
22:45:45.95 Port 33 wurde geöffnet!
22:45:45.95 Settimeout: RT=2000 WT=100
22:45:45.95 [TX]: AT+CBC
22:45:45.96 [RX]: AT+CBC
22:45:45.96 [RX]: +CBC: 1, 100
22:45:45.96 [RX]: OK
22:45:45.96 Port 33 wird geschlossen
22:45:45.98 Port 33 wird geöffnet...
22:45:45.98 Einstellungen werden gesetzt (460800, N, 8, 1)
22:45:45.98 Puffer werden gesetzt...(8192)
22:45:45.98 Settimeout: RT=2000 WT=200
22:45:46.48 Port 33 wurde geöffnet!
22:45:46.48 Settimeout: RT=2000 WT=100
22:45:46.48 [TX]: AT+CBC
22:45:46.50 [RX]: AT+CBC
22:45:46.50 [RX]: +CBC: 1, 100
22:45:46.50 [RX]: OK
22:45:46.50 Port 33 wird geschlossen
22:45:46.51 Port 33 wird geöffnet...
22:45:46.51 Einstellungen werden gesetzt (921600, N, 8, 1)
22:45:46.51 Puffer werden gesetzt...(8192)
22:45:46.51 Settimeout: RT=2000 WT=200
22:45:47.01 Port 33 wurde geöffnet!
22:45:47.01 Settimeout: RT=2000 WT=100
22:45:47.01 [TX]: AT+CBC
22:45:47.03 [RX]: AT+CBC
22:45:47.03 [RX]: +CBC: 1, 100
22:45:47.03 [RX]: OK
22:45:47.04 Port 33 wird geschlossen
22:46:02.06 OK pressed in settingswindow
22:46:02.17 Set first swap of settings
22:46:02.18 Apply new holidays
22:46:02.18 DoItemUpdate
22:46:02.21 DoItemUpdate fertig
22:46:02.21 Holidays applied
22:46:02.23 Second swap of settings set
22:46:02.23 Everything is done
22:46:04.81 Avaiable Ports: COM1=\Device\Serial0; COM3=Winachsf0; COM30=\Device\s117mdm0; COM31=\Device\s117mdm1; COM32=\Device\s117obex0; COM33=\Device\s117mgmt0;
22:46:04.81 Kompatibilitätsmodus aktiviert!
22:46:04.81 Neue COM-Bibliothek wird verwendet
22:46:04.81 Settimeout: RT=2000 WT=200
22:46:05.31 Port 33 wurde geöffnet!
22:46:05.32 [TX]: AT+CGSN
22:46:05.34 [RX]: AT+CGSN

22:46:05.34 [RX]: 351829021300527
22:46:05.34 [RX]: OK
22:46:05.34 Settimeout: RT=15000 WT=1000
22:46:05.35 [TX]: ATI
22:46:05.35 [RX]: ATI

22:46:05.35 [RX]: Sony Ericsson K850
22:46:05.35 [RX]: OK
22:46:05.37 [TX]: AT+CSCS="UTF-8"
22:46:05.37 [RX]: AT+CSCS="UTF-8"

22:46:05.37 [RX]: OK
22:46:05.38 [TX]: ATI3
22:46:05.38 [RX]: ATI3

22:46:05.38 [RX]: Sony Ericsson Device 075 USB WMC Modem
22:46:05.38 [RX]: OK
22:46:05.40 [TX]: AT+CNMI=2,1,0,1
22:46:05.40 [RX]: AT+CNMI=2,1,0,1

22:46:05.40 [RX]: OK
22:46:05.42 [TX]: AT*ECAM=1
22:46:05.43 [RX]: AT*ECAM=1

22:46:05.43 [RX]: OK
22:46:05.43 [TX]: AT*EVH=?
22:46:05.43 [RX]: AT*EVH=?

22:46:05.43 [RX]: ERROR
22:46:05.45 [TX]: AT+CBC
22:46:05.46 [RX]: AT+CBC

22:46:05.46 [RX]: +CBC: 1, 100
22:46:05.46 [RX]: OK
22:46:05.46 [TX]: AT+CSQ
22:46:05.48 [RX]: AT+CSQ

22:46:05.48 [RX]: +CSQ: 99,99
22:46:05.48 [RX]: OK
22:46:05.48 Alle Verbindungsaktionen beendet
22:46:05.53 DoItemUpdate
22:46:05.54 DoItemUpdate fertig
22:46:05.56 Lade Userdatenbank: Sony Ericsson K850 [351829021300527]
22:46:05.56 GMT Einstellungen geladen
22:46:05.56 InfoSMS geladen
22:46:05.57 Notizeintrag gesetzt
22:46:05.60 Kontakte geladen
22:46:05.62 DoItemUpdate
22:46:05.63 DoItemUpdate fertig
22:46:05.63 Organizer geladen
22:46:05.63 Notizen geladen
22:46:05.63 Load SMS Data...
22:46:05.67 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
22:46:05.67 SMS Data Loaded...
22:46:05.67 SMS geladen
22:46:05.67 Anrufe geladen
22:46:05.68 Suche Memorystick: A:\ C:\ D:\ E:\ F:\
22:46:05.68 Suche abgeschlossen:
22:46:15.68 Settimeout: RT=1500 WT=800
22:46:15.68 [TX]: AT+CBC
22:46:15.70 [RX]: AT+CBC

22:46:15.70 [RX]: +CBC: 1, 100
22:46:15.70 [RX]: OK
22:46:15.70 [TX]: AT+CSQ
22:46:15.71 [RX]: AT+CSQ

22:46:15.71 [RX]: +CSQ: 99,99
22:46:15.71 [RX]: OK
22:46:17.17 Settimeout: RT=15000 WT=1000
22:46:17.18 [TX]: AT+CSCA?
22:46:17.21 [RX]: AT+CSCA?

22:46:17.21 [RX]: +CSCA: "+385980501",145
22:46:17.23 [RX]: OK
22:46:17.23 [TX]: AT*EOBEX
22:46:17.25 [RX]: AT*EOBEX

22:46:17.25 [RX]: ERROR
22:46:17.25 [TX]: AT+CPROT=0
22:46:17.26 [RX]: AT+CPROT=0

22:46:17.26 [RX]: CONNECT
22:46:17.26 OBEX Connect: 4096 Bytes Paketgröße, Target:
22:46:17.26 [TX]: 80 00 13 10 00 10 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
22:46:17.29 [RX]: A0 00 18 10 00 30 00 4A 00 0C 49 52 4D 43 2D 53 59 4E 43 CB 00 00 00 03
22:46:17.29 Connection ID:3
22:46:17.29 Paketgröße: 4096, maximal möglich:12288
22:46:17.31 OBEX Put: telecom/pb/luid/.vcf
22:46:17.31 [TX]: 82 00 F2 01 00 2D 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 2E 00 76 00 63 00 66 00 00 C3 00 00 00 BA 49 00 BD 42 45 47 49 4E 3A 56 43 41 52 44 0D 0A 56 45 52 53 49 4F 4E 3A 32 2E 31 0D 0A 4E 3A 44 75 6D 6D 79 3B 44 75 6D 6D 79 0D 0A 54 45 4C 3B 43 45 4C 4C 3B 56 4F 49 43 45 3A 30 30 30 0D 0A 54 45 4C 3B 43 45 4C 4C 3B 48 4F 4D 45 3A 30 30 30 0D 0A 41 44 52 3B 48 4F 4D 45 3A 3B 3B 44 75 6D 6D 79 3B 44 75 6D 6D 79 3B 44 75 6D 6D 79 3B 30 30 30 30 3B 44 75 6D 6D 79 0D 0A 41 44 52 3B 57 4F 52 4B 3A 3B 3B 44 75 6D 6D 79 3B 44 75 6D 6D 79 3B 44 75 6D 6D 79 3B 30 30 30 30 3B 44 75 6D 6D 79 0D 0A 42 44 41 59 3A 31 39 39 39 30 31 30 31 0D 0A 45 4E 44 3A 56 43 41 52 44
22:46:17.56 [RX]: A0 00 19 4C 00 16 01 0C 30 30 30 32 30 30 30 30 30 33 36 32 02 03 32 32 30
22:46:17.56 OBEX Get: telecom/pb/luid/000200000362.vcf
22:46:17.56 [TX]: 83 00 48 01 00 45 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 30 00 30 00 30 00 32 00 30 00 30 00 30 00 30 00 30 00 33 00 36 00 32 00 2E 00 76 00 63 00 66 00 00
22:46:17.73 [RX]: A0 01 1F 49 01 1C 42 45 47 49 4E 3A 56 43 41 52 44 0D 0A 56 45 52 53 49 4F 4E 3A 32 2E 31 0D 0A 4E 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 44 75 6D 6D 79 3B 44 75 6D 6D 79 0D 0A 46 4E 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 44 75 6D 6D 79 2C 20 44 75 6D 6D 79 0D 0A 54 45 4C 3B 43 45 4C 4C 3A 30 30 30 0D 0A 54 45 4C 3B 43 45 4C 4C 3B 48 4F 4D 45 3A 30 30 30 0D 0A 41 44 52 3B 48 4F 4D 45 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3B 3B 44 75 6D 6D 79 3B 44 75 6D 6D 79 3B 44 75 6D 6D 79 3B 30 30 30 30 3B 44 75 6D 6D 79 0D 0A 41 44 52 3B 57 4F 52 4B 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3B 3B 44 75 6D 6D 79 3B 44 75 6D 6D 79 3B 44 75 6D 6D 79 3B 30 30 30 30 3B 44 75 6D 6D 79 0D 0A 42 44 41 59 3A 31 39 39 39 30 31 30 31 0D 0A 58 2D 49 52 4D 43 2D 4C 55 49 44 3A 30 30 30 32 30 30 30 30 30 33 36 32 0D 0A 45 4E 44 3A 56 43 41 52 44 0D 0A
22:46:17.73 ObexGet Fertig, Returncode=A0
22:46:17.75 OBEX Delete: telecom/pb/luid/000200000362.vcf
22:46:17.75 [TX]: 82 00 48 01 00 45 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 30 00 30 00 30 00 32 00 30 00 30 00 30 00 30 00 30 00 33 00 36 00 32 00 2E 00 76 00 63 00 66 00 00
22:46:18.59 [RX]: A0 00 19 4C 00 16 01 0C 30 30 30 32 30 30 30 30 30 33 36 32 02 03 32 32 31
22:46:18.60 Ermittle und verarbeite info.log
22:46:18.60 OBEX Get: telecom/pb/info.log
22:46:18.60 [TX]: 83 00 2E 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
22:46:18.70 [RX]: A0 01 E4 49 01 E1 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 32 31 35 0D 0A 4D 61 78 69 6D 75 6D 2D 52 65 63 6F 72 64 73 3A 31 30 30 30 0D 0A 46 72 65 65 2D 52 65 63 6F 72 64 73 3A 37 38 35 0D 0A 44 49 44 3A 34 37 46 43 44 45 34 45 0D 0A 49 45 4C 3A 30 78 30 38 0D 0A 48 44 3A 59 45 53 0D 0A 53 41 54 3A 43 43 0D 0A 4D 43 4C 3A 4E 4F 0D 0A 49 43 4C 3A 4E 4F 0D 0A 4F 43 4C 3A 4E 4F 0D 0A 58 2D 49 52 4D 43 2D 46 49 45 4C 44 53 3A 0D 0A 3C 42 65 67 69 6E 3E 0D 0A 56 45 52 53 49 4F 4E 3A 0D 0A 4E 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 5B 31 3D 31 35 3B 32 3D 31 35 5D 3A 3D 33 30 0D 0A 45 4D 41 49 4C 3B 54 59 50 45 3D 49 4E 54 45 52 4E 45 54 3A 3D 35 30 0D 0A 54 49 54 4C 45 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 31 35 0D 0A 4F 52 47 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 31 35 0D 0A 58 2D 54 45 4C 2D 54 59 50 45 53 3A 36 0D 0A 54 45 4C 3B 54 59 50 45 3D 57 4F 52 4B 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 48 4F 4D 45 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 43 45 4C 4C 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 46 41 58 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 50 41 47 45 52 3A 3D 34 30 0D 0A 54 45 4C 3A 3D 34 30 0D 0A 55 52 4C 3A 3D 35 30 0D 0A 58 2D 49 52 4D 43 2D 4C 55 49 44 3A 3D 31 32 0D 0A 52 45 56 3A 0D 0A 3C 45 6E 64 3E 0D 0A
22:46:18.70 ObexGet Fertig, Returncode=A0
22:46:18.70 Info.log:
Total-Records:215
Maximum-Records:1000
Free-Records:785
DID:47FCDE4E
IEL:0x08
HD:YES
SAT:CC
MCL:NO
ICL:NO
OCL:NO
X-IRMC-FIELDS:
<Begin>
VERSION:
N;CHARSET=ISO-8859-1;CHARSET=UTF-8[1=15;2=15]:=30
EMAIL;TYPE=INTERNET:=50
TITLE;CHARSET=ISO-8859-1;CHARSET=UTF-8:=15
ORG;CHARSET=ISO-8859-1;CHARSET=UTF-8:=15
X-TEL-TYPES:6
TEL;TYPE=WORK:=40
TEL;TYPE=HOME:=40
TEL;TYPE=CELL:=40
TEL;TYPE=FAX:=40
TEL;TYPE=PAGER:=40
TEL:=40
URL:=50
X-IRMC-LUID:=12
REV:
<End>

22:46:18.70 OBEX Get: telecom/pb.vcf
22:46:18.70 [TX]: 83 00 24 01 00 21 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2E 00 76 00 63 00 66 00 00
22:46:39.31 Rückgabe ReadFile: 0 - angefordert wurden: 3 Bytes
22:46:39.31 [RX]: 00 00 00
22:46:39.31 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
22:46:39.31 ObexGet Fertig, Returncode=0
22:46:39.31 OBEX Errorcode: 00 - Phone didn't answer
22:46:39.31 OBEX Get: telecom/pb/luid/cc.Log
22:46:39.31 [TX]: 83 00 34 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 63 00 63 00 2E 00 4C 00 6F 00 67 00 00
22:46:55.45 Rückgabe ReadFile: 0 - angefordert wurden: 3 Bytes
22:46:55.45 [RX]: 00 00 00
22:46:55.45 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
22:46:55.45 ObexGet Fertig, Returncode=0
22:46:55.45 OBEX Errorcode: 00 - Phone didn't answer
22:46:55.45 OBEX Disconnect
22:46:55.45 [TX]: 81 00 03
22:46:55.54 [RX]: A0 00 03
22:46:55.54 Disconnect hat funktioniert
22:46:55.54 Lese noch den OK-String
22:46:55.71 Settimeout: RT=1500 WT=800
22:46:55.71 [TX]: AT+CBC
22:46:55.90 [RX]: AT+CBC

22:46:55.90 [RX]: +CBC: 1, 100
22:46:55.90 [RX]: OK
22:46:55.90 [TX]: AT+CSQ
22:46:55.92 [RX]: AT+CSQ

22:46:55.92 [RX]: +CSQ: 99,99
22:46:55.93 [RX]: OK
22:47:05.93 [TX]: AT+CBC
22:47:06.50 [RX]: AT+CBC

22:47:06.50 [RX]: +CBC: 1, 100
22:47:06.50 [RX]: OK
22:47:06.50 [TX]: AT+CSQ
22:47:06.51 [RX]: AT+CSQ

22:47:06.51 [RX]: +CSQ: 99,99
22:47:06.51 [RX]: OK
22:47:16.51 [TX]: AT+CBC
22:47:16.70 [RX]: AT+CBC

22:47:16.70 [RX]: +CBC: 1, 100
22:47:22.46 Port 33 wird geschlossen

You should connect with COM30 and not COM33