FJ Software

Hello, on my Huawei I run MPE client. It starts automatically, and see the Ip adress (192.168.1.13).
Running Android 7.0.

On my PC with windows 10, i can ping the phone.
But if I start MPE, connection does not work. I even tried to give the Ip adress directly, but still "socket error 10061".

the log :

Code: Alles auswählen

Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.8
Datum:   23/01/2018

11:43:18.27       Windows Version=10.0
11:43:18.27       Setting Port: 999
11:43:18.27       Setting Baud: 115200
11:43:18.27       Avaiable Ports: COM1=\Device\Serial0; 
11:43:18.27       Main Load frmSplash
11:43:18.28       Load frmSplash...
11:43:18.56       Hauptfenster wird geladen
11:43:18.69       Sidebar fertig geladen
11:43:18.78       UC SMS wird geladen
11:43:18.81       UC Phonebook wird geladen
11:43:18.85       UC Phonebook fertig geladen
11:43:18.85       UC Calls wird geladen
11:43:18.88       UC Organizer wird geladen
11:43:18.94       Organizer initiated
11:43:18.97       Startpage=2
11:43:18.97       DoItemUpdate
11:43:18.99       DoItemUpdate fertig
11:43:18.99       UC Filebrowser wird geladen
11:43:19.08       UC Filebrowser fertig geladen
11:43:19.08       UC AppBrowser wird geladen
11:43:19.08       UC Notes wird geladen
11:43:19.10       UC Calls wird geladen
11:43:19.16       Connect via FixedIP: 192.168.1.13
11:43:19.16       Try connecting to 192.168.1.13 (fixed IP)...
11:43:20.20       SocketError: 10061 - Connection is forcefully rejected
11:43:20.20       Connect to Android failed!
11:43:20.20       bOpened=False
11:43:20.20       Connexion à 192.168.1.13 a failli!
SocketError: 10061 - Connection is forcefully rejected
11:43:20.20       Refresh ComDescriptions...
11:43:20.20       PORT: COM1 Enumerator=ACPI Displayed=Port de communication InstanceID=ACPI\PNP0501\0
11:43:20.20       ErrMsg (Silent): La connexion avec le téléphone n'a pas pu être établie.:
Connexion à 192.168.1.13 a failli!
SocketError: 10061 - Connection is forcefully rejected
11:43:20.20       ShowBalloontip: MyPhoneExplorer - Erreur... - La connexion avec le téléphone n'a pas pu être établie.:
Connexion à 192.168.1.13 a failli!
SocketError: 10061 - Connection is forcefully rejected
11:43:20.24       Setting Lastuser: 
11:43:20.25       Lade Userdatenbank: 
11:43:20.31       Kontakte geladen
11:43:20.31       ParseDialedCalls needed 0ms
11:43:20.35       Anrufe geladen
11:43:20.35       Organizer LoadUser DefaultTimeColWidth=124
11:43:20.35       Organizer geladen
11:43:20.35       Notizen geladen
11:43:20.35       SMS geladen
11:43:20.45       Hauptfenster fertig geladen
11:43:29.66       Refresh ComDescriptions...
11:43:29.66       PORT: COM1 Enumerator=ACPI Displayed=Port de communication InstanceID=ACPI\PNP0501\0
11:43:30.72       Device driver info:
11:43:30.72       Devices with ADB Interface: 
11:43:30.74       ADB Devices: 
11:43:30.74       Portable devices: TOSHIBA HDWD110, M3              , M3              , Card  Reader    
11:43:30.74       Unknown devices: <unknown device>

BTW, this is new, I've been using MPE for a long while, I think the problem started with last W10 update…
Right now the only solution for me is to connect with USB.

No one knows ? it's really a big problem.
please ...
even the usb solution does not work : i need to reboot both PC and phone, and eventually usb can connect.

try Fix ip :

Code: Alles auswählen

17:38:07.52       Connect via FixedIP: 192.168.1.13
17:38:07.52       Try connecting to 192.168.1.13 (fixed IP)...
17:38:07.69       Connect to Android OK (192.168.1.13)
17:38:07.69       Settimeout: RT=2000 WT=500
17:38:07.69       bOpened=True
17:38:07.70 [TX]: AT+CGSN
17:38:09.69       Got no Model, close port
17:38:09.69       ClosePort called
17:38:09.69       Androidsocket wird geschlossen 7
17:38:09.69       Port wurde geschlossen
17:38:09.70       Ce téléphone ne peut pas être identifié
17:38:09.70       Refresh ComDescriptions...
17:38:09.70       PORT: COM1 Enumerator=ACPI Displayed=Port de communication InstanceID=ACPI\PNP0501\0
17:38:09.70       ErrMsg: La connexion avec le téléphone n'a pas pu être établie.:
Ce téléphone ne peut pas être identifié
17:38:14.01       Refresh ComDescriptions...
17:38:14.01       PORT: COM1 Enumerator=ACPI Displayed=Port de communication InstanceID=ACPI\PNP0501\0
17:38:16.72       Device driver info:
17:38:16.72       Devices with ADB Interface: 
17:38:16.73       ADB Devices: 
17:38:16.73       Portable devices: TOSHIBA HDWD110, M3              , M3              , Card  Reader    
17:38:16.73       Unknown devices: <unknown device>

With wifi: try turning off anti-virus/firewalls etc and then try. Is MPE running on the phone when you try to connect?

Yes, the phone client is running and says that there is a wifi connection (IP 192.168.1.13).
I start MPE on computer, and sometimes it works, sometimes it does not.
This morning it worked !

If it does not work, I reboot phone. generally it works. If not, I reboot PC.

Then it is OK.
Only thing I saw : I started windows manager and see MPE as an running application ; if I have the error, I quit program, it disappears from applications, but part of it stays as a process, then starting program again is useless, I'll get the same error even if I switch to usb connection.
I can kill the process, restart program, and now, eventually, it will work.

Weir, right ? the log has to much German sentences for me to understand, but I don't see what the missing model can be.
Thanks for answering.

FJ Software

connection forcefully rejected

connection forcefully rejected