Seite 1 von 1
Phone Could Not Be Identified
Verfasst: Fr 29. Jun 2007, 15:08
von K800
When I click connect I get the message "Phone Could Not Be Identified" yet it picks it up when I plug the phone into the pc.
Im using the K800i, how do I fix this?
Cheers
Verfasst: Fr 29. Jun 2007, 15:33
von Bryan84
Reboot your computer and try.
Verfasst: Fr 29. Jun 2007, 15:36
von K800
For some reason ive got it to work
What i need to know now is why it loses connection when transferring .dm files across? It says that the phone didnt answer and its usually when it gets so far.
Verfasst: Fr 29. Jun 2007, 18:04
von FJ
I) think you have set the wrong COM-Port. Please check your Windows-Devicemanager. There should be 2 Entrys in "Modems". Use one of this Ports, not the port which is listed in the section where you can find all the other COM-Ports.
Verfasst: Fr 29. Jun 2007, 19:12
von K800
If that was the case why does it get so far then stop and say phone didnt answer?
Verfasst: Fr 29. Jun 2007, 19:17
von FJ
Cause the wrong COM-Port is not optimal for filetransfer.
Verfasst: Fr 29. Jun 2007, 19:26
von K800
Yay!
Done it, I changed it to COM 7 and it worked
Thanks
Verfasst: So 1. Jul 2007, 13:10
von Bryan84
How will i know which is the "GOOD" port to use? By default mine is COM3 and COM4.
Verfasst: So 1. Jul 2007, 13:51
von K800
Choose one withe words Sony Ericsson it, i think it says that or SE...something similar.
Verfasst: So 1. Jul 2007, 16:35
von FJ
In MyPhoneExplorer they are listed like "SonyEricsson USB Port". In the device-manager of windows you'll find the good ports in "Modems"
Verfasst: So 1. Jul 2007, 17:54
von Bryan84
Does Baud Rate got anything to do with stablity?
Verfasst: So 1. Jul 2007, 17:57
von FJ
If you use the USB-Cable then it doesn't matter which baudrate you choose.
Verfasst: Mo 2. Jul 2007, 04:56
von Bryan84
Oh so it doesn't have to maatch anything if I'm using a USB-cable?
Verfasst: Mo 2. Jul 2007, 21:13
von FJ
On the USB-Cable there is only the right Portnumber important (and leave the OBEX-Size always on 4096 Bytes)
Verfasst: Di 3. Jul 2007, 04:58
von Bryan84
Okay thanks for reply!
Verfasst: Di 3. Jul 2007, 13:28
von markoswin
Hi,
I also get the "Phone could not be identified" error. I'm using a SE W950 with a USB connection (in phone mode, not file transfer mode).
I tried rebooting as advised above but still get the same error. I've tried to connect using the COM port marked "SE USB modem" and the one marked "SE PC-Connect port" but I get the same error with both.
Any idea where I might be going wrong? Thanks for your help...
Verfasst: Di 3. Jul 2007, 13:55
von user_deleted
The W950i is a symbian based phone.
These are not supported by MPE.
br ...
Verfasst: Di 3. Jul 2007, 13:57
von markoswin
Well, that makes sense.
