FJ Software

Good afternoon,
I'm contacting you as I receintly upgrade my phone to Android 4.1.2 and since the upgrade, I'm not able to sync with my PC anymore.
I have a Windows 7 laptop with Outlook 2010.
I was perfectly able to sync with Android 4.0
After the upgrade, I uninstalled/re-installed both the Android and the PC client, but still no luck.
I also looked around in different forums, but couldn't find a solution.
MPE is able to connect to my phone (via Wifi, USB or Bluetooth), but if I try to sync or even just download the list of contacts, I get an error message stating:
OBEX Errorcode: 00 - Phone didn't answer

If I check the log of MPE (using the view log button in settings)
15:56:33.13 Broadcaster started
15:56:33.13 Sending broadcast
15:56:33.65 Sending broadcast
15:56:34.18 Sending broadcast
15:56:35.15 Try connecting to 192.168.1.4 (cached WifiIP)...
15:56:36.25 Connect to Android OK
15:56:36.25 Settimeout: RT=2000 WT=500
15:56:36.25 bOpened=True
15:56:36.25 [TX]: AT+CGSN
15:56:36.69 [RX]: AT+CGSN
15:56:36.69 [RX]: 357215040041520
15:56:36.69 [RX]: OK
15:56:36.69 Settimeout: RT=15000 WT=1000
15:56:36.69 [TX]: AT*PIN=f82e9e5e7337c05ba51e3720c9d0cecc
15:56:36.75 [RX]: AT*PIN=f82e9e5e7337c05ba51e3720c9d0cecc
15:56:36.75 [RX]: *PIN: ACCESS OK,10
15:56:36.75 [RX]: OK
15:56:36.75 [TX]: ATI
15:56:36.78 [RX]: ATI
15:56:36.78 [RX]: Acer S500
15:56:36.78 [RX]: OK
15:56:36.78 [TX]: AT*APPVERSION=1.8.4
15:56:36.92 [RX]: AT*APPVERSION=1.8.4
15:56:36.92 [RX]: 16,1.0.23
15:56:36.92 [RX]: OK
15:56:36.92 [TX]: AT+CSCS="UTF-8"
15:56:36.95 [RX]: AT+CSCS="UTF-8"
15:56:36.95 [RX]: OK
15:56:36.95 [TX]: AT+CNMI=2,1,0,1
15:56:36.99 [RX]: AT+CNMI=2,1,0,1
15:56:36.99 [RX]: ERROR
15:56:36.99 [TX]: AT*ECAM=1
15:56:37.02 [RX]: AT*ECAM=1
15:56:37.02 [RX]: OK
15:56:37.02 [TX]: AT+CIND=?
15:56:37.05 [RX]: AT+CIND=?
15:56:37.05 [RX]: ERROR
15:56:37.05 [TX]: AT+CBC
15:56:37.08 [RX]: AT+CBC
15:56:37.08 [RX]: +CBC: 0,48
15:56:37.08 [RX]: OK
15:56:37.08 [TX]: AT+CSQ
15:56:37.11 [RX]: AT+CSQ
15:56:37.11 [RX]: +CSQ: 29,99
15:56:37.11 [RX]: OK
15:56:37.11 Alle Verbindungsaktionen beendet
15:56:40.39 Settimeout: RT=3500 WT=800
15:56:40.39 [TX]: AT+CBC
15:56:40.56 [RX]: AT+CBC
15:56:40.56 [RX]: +CBC: 0,48
15:56:40.56 [RX]: OK
15:56:40.56 [TX]: AT+CSQ
15:56:40.59 [RX]: AT+CSQ
15:56:40.59 [RX]: +CSQ: 29,99
15:56:40.59 [RX]: OK
15:56:42.85 Settimeout: RT=15000 WT=1000
15:56:42.85 [TX]: AT+CBC
15:56:43.02 [RX]: AT+CBC
15:56:43.02 [RX]: +CBC: 0,48
15:56:43.02 [RX]: OK
15:56:43.07 Form_Activate fSync Operation=1
15:56:43.07 [TX]: AT*SOPS
15:56:43.10 [RX]: AT*SOPS
15:56:43.10 [RX]: *SOPS: ,20610,be
15:56:43.10 [RX]: OK
15:56:43.10 [TX]: AT+CPROT=0
15:56:43.13 [RX]: AT+CPROT=0
15:56:43.13 [RX]: CONNECT
15:56:43.13 OBEX Connect: 16384 Bytes Paketgröße, Target: IRMC-SYNC
15:56:43.13 [TX]: 80 00 13 10 00 40 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
15:56:54.69 [RX]: A0 00 18 10 00 FF FF CB 00 00 00 01 4A 00 0C 49 52 4D 43 2D 53 59 4E 43
15:56:54.69 Connection ID:1
15:56:54.69 Paketgröße: 16384, maximal möglich:65535
15:56:54.69 Ermittle und verarbeite info.log
15:56:54.69 Settimeout: RT=20000 WT=10000
15:56:54.69 OBEX Get: telecom/pb/info.log
15:56:54.69 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
15:57:05.74 [RX]: A0 00 18 49 00 15 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 31 35 34 31
15:57:05.74 ObexGet Fertig, Returncode=A0
15:57:05.74 Info.log:
Total-Records:1541
15:57:05.74 Settimeout: RT=90000 WT=10000
15:57:05.74 OBEX Get: telecom/pb/initsync
15:57:05.74 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 69 00 74 00 73 00 79 00 6E 00 63 00 00
15:57:49.19 [RX]: 90 00 0F 48 00 0C 0D 0A 32 30 2F 31 35 34 31
15:57:49.19 [TX]: 83 00 03
15:59:19.20 [RX]: 00
15:59:19.20 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
15:59:19.20 ObexGet Fertig, Returncode=0
15:59:19.20 OBEX Errorcode: 00 - Phone didn't answer, Timeout
15:59:19.20 ErrMsg: OBEX Errorcode: 00 - Phone didn't answer, Timeout
15:59:34.09 OBEX Disconnect
15:59:34.11 Settimeout: RT=10000 WT=10000
15:59:34.11 [TX]: 81 00 08 CB 00 00 00 01
15:59:44.11 [RX]: 00
15:59:44.11 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
15:59:44.11 Disconnect answered...
15:59:50.76 Settimeout: RT=3500 WT=800
15:59:50.76 [TX]: AT+CBC
15:59:54.24 Androidsocket wird geschlossen 7
15:59:54.24 Port wurde geschlossen
16:00:10.22 Refresh ComDescriptions...

It seems that MyPhoneExplorer client crashes on the phone.

- close MyPhoneExplorer on the phone and on the PC
- launch MyPhoneExplorer in debugmode (Start-Run-myphoneexplorer debug-OK)
- connect via USB
- reproduce the issue
- send me the files Debug.txt AND AndroidDebug.txt from %appdata%\MyPhoneExplorer zipped via email with a link to this thread.

Good evening,
I just wanted to inform you that I started the client in debug mode, and it worked.
I was able to synchronise without any issue.
I also restarted the client in normal mode and I'm able to sync as well.
Thanks a million!

Thanks Ben! Your tip lets me sync again. XP recognizes my Samsung I717 & so can sync, but restarting doesn't work for me. I can't get that far. As soon as I un-check USB Debugging, my phone disconnects from my computer. I must stay in Developer / Debug mode. Since I have tried Samsung Drivers for Mobile Phones v1.3.2200, v1.5.14, & v1.5.23, with no change, should I post this to a Google Forum instead?

Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.4
Datum: 2013-05-04

14:27:50.31 Setting Port: 999
14:27:50.31 Setting Baud: 115200
14:27:50.32 Avaiable Ports: COM3=\Device\ssudmdm0000;
14:27:50.37 Main Load frmSplash
14:27:50.43 Load frmSplash...
14:27:50.45 Show splash...
14:27:50.45 frmSplash geladen
14:27:51.98 Hauptfenster wird geladen
14:27:52.29 Sidebar fertig geladen
14:27:52.51 UC SMS wird geladen
14:27:52.67 UC Phonebook wird geladen
14:27:52.75 UC Phonebook fertig geladen
14:27:52.75 UC Calls wird geladen
14:27:52.79 UC Organizer wird geladen
14:27:52.96 Organizer initiated
14:27:52.98 Startpage=2
14:27:52.98 DoItemUpdate
14:27:53.00 DoItemUpdate fertig
14:27:53.04 UC Filebrowser wird geladen
14:27:53.13 UC Filebrowser fertig geladen
14:27:53.13 UC AppBrowser wird geladen
14:27:53.17 UC Notes wird geladen
14:27:53.20 UC Calls wird geladen
14:27:53.32 Setting Lastuser: samsung SAMSUNG-SGH-I717 [352012050520914]
14:27:53.35 Lade Userdatenbank: samsung SAMSUNG-SGH-I717 [352012050520914]
14:27:53.38 LoadDatafile: pb_metadata.xml(1508 Bytes)
14:27:53.46 LoadDatafile: Phonebook.dat(647296 Bytes)
14:27:55.79 Kontakte geladen
14:27:55.85 LoadDatafile: Calls.dat(54835 Bytes)
14:27:57.67 Anrufe geladen
14:27:57.67 Organizer LoadUser DefaultTimeColWidth=101
14:27:57.88 LoadDatafile: Organizer.dat(399214 Bytes)
14:28:00.25 LoadDatafile: cal_metadata.xml(1020 Bytes)
14:28:00.25 DoItemUpdate
14:28:00.32 DoItemUpdate fertig
14:28:00.68 Organizer geladen
14:28:00.68 Notizen geladen
14:28:00.68 Load SMS Data...
14:28:00.73 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
14:28:00.73 SMS Data Loaded...
14:28:00.73 SMS geladen
14:28:01.70 Hauptfenster fertig geladen
14:28:01.93 Init Android Connection for future connect via USB
14:28:01.93 RunADBCommand: start-server
14:28:02.73 Downloader: RC=6 BytesMax=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
14:28:06.50 ADB CommandResponse: * daemon not running. starting it now on port 5037 *
* daemon started successfully *
14:28:06.50 Run DeviceTracker
14:28:06.54 Init Tracker
14:28:06.57 Device Tracker Message: OKAY0000
14:29:19.95 RunADBCommand: start-server
14:29:20.04 ADB CommandResponse:
14:29:20.04 RunADBCommand: devices
14:29:20.13 ADB CommandResponse: List of devices attached
14:29:20.13 Connect to Android failed!
14:29:20.13 bOpened=False
14:29:20.13 No device attached to USB
14:29:20.13 Refresh ComDescriptions...
14:29:20.26 MODEM: COM3 Enumerator=USB Displayed=SAMSUNG Mobile USB Modem FriendlyName=SAMSUNG Mobile USB Modem InstanceID=USB\VID_04E8&PID_6860&MODEM\6&305B6D6E&6&0001
14:29:20.26 ErrMsg: Connection to phone could not be established:
No device attached to USB
14:33:26.96 Refresh ComDescriptions...
14:33:27.09 MODEM: COM3 Enumerator=USB Displayed=SAMSUNG Mobile USB Modem FriendlyName=SAMSUNG Mobile USB Modem InstanceID=USB\VID_04E8&PID_6860&MODEM\6&305B6D6E&6&0001
14:33:27.81 StickyNotesPath=C:\WINDOWS\Sysnative\StikyNot.exe FileExists=False

For USB connections, USB Debugging must be (and stay) activated.
What Ben mentioned, was starting MyPhoneExplorer on PC in debug mode.

MfG...

Actually, what Ben said was that he was then able to use MPE in normal mode. Further, I never had to be in debug mode before the "upgrade". Neither instance agrees with your claim that one needs to be in debug mode.

USB Cnnection without USB-Debugging is impossible.
The only exception is HTC, when you plug in a HTC phone then the USB-Debugging mode is activated automatically cause HTC Sync does also work throught this mode.