FJ Software

Hi,

Where can I find a list of all the telephones compatible with Phone Explorer?

/Kjell

All phones exept Symbian-Phones (P-series, M600i, W950i)

OK, thanks very much!

I tried some old SE ones but did´t get them to work - probably due to connection errors. I use my z520i via USB without problems, but the other ones need other drivers I suppose


/Kjell

Please read the FAQ to fix your communication problems. The connection will work with all phones, on very old models (f.e. T300) you cannot use the filebrowser/organizer/adressbook. Calls, SMS, Fileupload works with every phone

Hi,

It's really this software can't use for SE P910i ?
I have problem, may be you can help me :
How i can import my SMS from SE910i to PC ?
Thanks for helping

Please read on my Homepage. ITS NOT COMPATIBLE WITH SYMBIAN PHONES !!

it's not compatible with P990 for ALWAYS or maybe compatible in a few months ?

because your software is very good and fast. I use Vista, and with your software, when i receive a call, i see the number on my screen, i can read my call list, but with the contacts and the calendar (the most important), i've the message :



it's the only problem

I don't planned any update for Symbian.

but for interest: Can you also handle SMS-messages ? reading, uploading, sending ?

yes,

with your software, i can send and receive my sms without problem. I connect my GSM by bluetooth.

Actually, you have the only software working with Vista and the P990i. If you do the update to Symbian, you can send easy your software at all SE customer's. PC Suite for Symbian will be on the Net maybe in July and all SE users search a solution to synchronize the P990 / M600 etc ...

Sorry for my english, i'm french

Can you send me some logfiles ? C:\Programs\MyPhoneExplorer\Debug.txt

Logdatei MyPhoneExplorer
************************
Programmversion: 1.5.9
Datum: 24/02/2007


16:52:06.05 Setting Port: 6
16:52:06.05 Setting Baud: 921600
16:52:06.05 Avaiable Ports: COM3=Winachsf0; COM4=\Device\BthModem2; COM5=\Device\BthModem0; COM6=\Device\BthModem1;
16:52:07.01 frmSplash geladen
16:52:09.81 Hauptfenster wird geladen
16:52:10.13 Sidebar fertig geladen
16:52:10.18 Farbschema wurde gelesen
16:52:10.37 UC SMS wird geladen
16:52:10.45 UC Phonebook wird geladen
16:52:10.48 UC Phonebook fertig geladen
16:52:10.48 UC Calls wird geladen
16:52:10.61 UC Organizer wird geladen
16:52:10.76 DoItemUpdate
16:52:10.85 DoItemUpdate fertig
16:52:11.17 UC Notes wird geladen
16:52:11.18 UC Calls wird geladen
16:52:11.21 Setting Lastuser: Sony Ericsson P990i [359593002035187]
16:52:11.23 Lade Userdatenbank: Sony Ericsson P990i [359593002035187]
16:52:11.24 GMT Einstellungen geladen
16:52:11.24 InfoSMS geladen
16:52:11.24 Notizeintrag gesetzt
16:52:11.26 Kontakte geladen
16:52:11.33 DoItemUpdate
16:52:11.38 DoItemUpdate fertig
16:52:11.38 Organizer geladen
16:52:11.38 Notizen geladen
16:52:11.39 SMS geladen
16:52:11.47 Anrufe geladen
16:52:11.54 Hauptfenster fertig geladen
17:19:41.32 Avaiable Ports: COM3=Winachsf0; COM4=\Device\BthModem2; COM5=\Device\BthModem0; COM6=\Device\BthModem1;
17:19:41.32 Neue COM-Bibliothek wird verwendet
17:19:42.41 Settimeout: RT=2000 WT=200
17:19:42.91 Port 6 wurde geöffnet !
17:19:42.93 [TX]: AT+CGSN
17:19:43.16 [RX]: AT+CGSN

17:19:43.16 [RX]: 359593002035187
17:19:43.19 [RX]: OK
17:19:43.20 Settimeout: RT=15000 WT=1000
17:19:43.20 [TX]: AT+CGMI
17:19:43.27 [RX]: AT+CGMI

17:19:43.27 [RX]: Sony Ericsson
17:19:43.28 [RX]: OK
17:19:43.29 [TX]: ATI
17:19:43.34 [RX]: ATI

17:19:43.34 [RX]: Sony Ericsson P990i
17:19:43.34 [RX]: OK
17:19:43.35 [TX]: AT+CSCS="UTF-8"
17:19:43.42 [RX]: AT+CSCS="UTF-8"

17:19:43.42 [RX]: OK
17:19:43.43 [TX]: AT+CSCA?
17:19:43.87 [RX]: AT+CSCA?

17:19:43.87 [RX]: +CSCA: "0590350012",161
17:19:43.89 [RX]: OK
17:19:43.89 [TX]: ATI3
17:19:43.94 [RX]: ATI3

17:19:43.94 [RX]: Sony Ericsson Bluetooth Modem
17:19:43.95 [RX]: OK
17:19:43.95 [TX]: AT+CNMI=2,1,0,1
17:19:44.06 [RX]: AT+CNMI=2,1,0,1

17:19:44.06 [RX]: OK
17:19:44.06 [TX]: AT*ECAM=1
17:19:44.14 [RX]: AT*ECAM=1

17:19:44.14 [RX]: OK
17:19:44.14 [TX]: AT*EVH=?
17:19:44.24 [RX]: AT*EVH=?

17:19:44.24 [RX]: ERROR
17:19:44.25 [TX]: AT+CBC
17:19:44.34 [RX]: AT+CBC

17:19:44.34 [RX]: +CBC: 1, 99
17:19:44.36 [RX]: OK
17:19:44.37 [TX]: AT+CSQ
17:19:44.44 [RX]: AT+CSQ

17:19:44.44 [RX]: +CSQ: 14,99
17:19:44.46 [RX]: OK
17:19:44.48 Alle Verbindungsaktionen beendet
17:19:44.48 Suche Memorystick: C:\ D:\ E:\
17:19:44.48 Suche abgeschlossen:
17:19:54.49 Settimeout: RT=1500 WT=800
17:19:54.49 [TX]: AT+CBC
17:19:55.99 Port 6 wird geschlossen
17:20:06.09 Neue COM-Bibliothek wird verwendet
17:20:06.23 Settimeout: RT=2000 WT=200
17:20:06.73 Port 6 wurde geöffnet !
17:20:06.74 Settimeout: RT=1500 WT=500
17:20:06.74 [TX]: AT+CGSN
17:20:06.91 [RX]: AT+CGSN

17:20:06.91 [RX]: 359593002035187
17:20:06.93 [RX]: OK
17:20:06.93 Settimeout: RT=15000 WT=1000
17:20:06.94 [TX]: AT+CBC
17:20:07.01 [RX]: AT+CBC

17:20:07.01 [RX]: +CBC: 1, 99
17:20:07.03 [RX]: OK
17:20:07.04 [TX]: AT+CSQ
17:20:07.12 [RX]: AT+CSQ

17:20:07.12 [RX]: +CSQ: 14,99
17:20:07.13 [RX]: OK
17:20:07.14 [TX]: AT+CSCS="UTF-8"
17:20:07.20 [RX]: AT+CSCS="UTF-8"

17:20:07.20 [RX]: OK
17:20:07.21 [TX]: AT+CNMI=2,1,0,1
17:20:07.33 [RX]: AT+CNMI=2,1,0,1

17:20:07.33 [RX]: OK
17:20:07.34 [TX]: AT*ECAM=1
17:20:07.40 [RX]: AT*ECAM=1

17:20:07.40 [RX]: OK
17:20:17.40 Settimeout: RT=1500 WT=800
17:20:17.41 [TX]: AT+CBC
17:20:17.47 [RX]: AT+CBC

17:20:17.47 [RX]: +CBC: 1, 99
17:20:17.48 [RX]: OK
17:20:17.49 [TX]: AT+CSQ
17:20:17.59 [RX]: AT+CSQ

17:20:17.59 [RX]: +CSQ: 14,99
17:20:17.61 [RX]: OK
17:20:27.61 [TX]: AT+CBC
17:20:29.10 Port 6 wird geschlossen
17:20:39.21 Neue COM-Bibliothek wird verwendet
17:20:39.36 Settimeout: RT=2000 WT=200
17:20:39.86 Port 6 wurde geöffnet !
17:20:39.87 Settimeout: RT=1500 WT=500
17:20:39.88 [TX]: AT+CGSN
17:20:40.14 [RX]: AT+CGSN

17:20:40.14 [RX]: 359593002035187
17:20:40.15 [RX]: OK
17:20:40.15 Settimeout: RT=15000 WT=1000
17:20:40.15 [TX]: AT+CBC
17:20:40.22 [RX]: AT+CBC

17:20:40.22 [RX]: +CBC: 1, 99
17:20:40.24 [RX]: OK
17:20:40.25 [TX]: AT+CSQ
17:20:40.33 [RX]: AT+CSQ

17:20:40.33 [RX]: +CSQ: 14,99
17:20:40.33 [RX]: OK
17:20:40.34 [TX]: AT+CSCS="UTF-8"
17:20:40.42 [RX]: AT+CSCS="UTF-8"

17:20:40.42 [RX]: OK
17:20:40.43 [TX]: AT+CNMI=2,1,0,1
17:20:40.53 [RX]: AT+CNMI=2,1,0,1

17:20:40.53 [RX]: OK
17:20:40.54 [TX]: AT*ECAM=1
17:20:40.61 [RX]: AT*ECAM=1

17:20:40.61 [RX]: OK
17:20:50.60 Settimeout: RT=1500 WT=800
17:20:50.61 [TX]: AT+CBC
17:20:50.71 [RX]: AT+CBC

17:20:50.71 [RX]: +CBC: 1, 99
17:20:50.73 [RX]: OK
17:20:50.73 [TX]: AT+CSQ
17:20:50.80 [RX]: AT+CSQ

17:20:50.80 [RX]: +CSQ: 14,99
17:20:50.82 [RX]: OK
17:21:00.83 [TX]: AT+CBC
17:21:02.32 Port 6 wird geschlossen
17:21:12.43 Neue COM-Bibliothek wird verwendet
17:21:12.57 Settimeout: RT=2000 WT=200
17:21:13.07 Port 6 wurde geöffnet !
17:21:13.07 Settimeout: RT=1500 WT=500
17:21:13.08 [TX]: AT+CGSN
17:21:13.23 [RX]: AT+CGSN

17:21:13.23 [RX]: 359593002035187
17:21:13.23 [RX]: OK
17:21:13.24 Settimeout: RT=15000 WT=1000
17:21:13.24 [TX]: AT+CBC
17:21:13.31 [RX]: AT+CBC

17:21:13.31 [RX]: +CBC: 1, 99
17:21:13.32 [RX]: OK
17:21:13.33 [TX]: AT+CSQ
17:21:13.40 [RX]: AT+CSQ

17:21:13.40 [RX]: +CSQ: 14,99
17:21:13.41 [RX]: OK
17:21:13.42 [TX]: AT+CSCS="UTF-8"
17:21:13.48 [RX]: AT+CSCS="UTF-8"

17:21:13.48 [RX]: OK
17:21:13.49 [TX]: AT+CNMI=2,1,0,1
17:21:13.64 [RX]: AT+CNMI=2,1,0,1

17:21:13.64 [RX]: OK
17:21:13.65 [TX]: AT*ECAM=1
17:21:13.71 [RX]: AT*ECAM=1

17:21:13.71 [RX]: OK
17:21:23.71 Settimeout: RT=1500 WT=800
17:21:23.71 [TX]: AT+CBC
17:21:23.82 [RX]: AT+CBC

Anonymous hat geschrieben:it's not compatible with P990 for ALWAYS or maybe compatible in a few months ?

because your software is very good and fast. I use Vista, and with your software, when i receive a call, i see the number on my screen, i can read my call list, but with the contacts and the calendar (the most important), i've the message :



it's the only problem

How do you get to connect your p990? When i try with my M600, MPE says unknown device end disconnect

@the guest who posted the logfile: Very thanks for the log, but it would be more interesting if you try to download the Phonebook, so i can see what goes wrong with the OBEX-Initialisation

I'm not the guest, anyway that's it:
I obscured the imei with some xxxx

Anonymous hat geschrieben:

Anonymous hat geschrieben:it's not compatible with P990 for ALWAYS or maybe compatible in a few months ?

because your software is very good and fast. I use Vista, and with your software, when i receive a call, i see the number on my screen, i can read my call list, but with the contacts and the calendar (the most important), i've the message :



it's the only problem

How do you get to connect your p990? When i try with my M600, MPE says unknown device end disconnect

Oh, i've seen, we must use the serial port for the modem and not the one for the Mrouter

I'm sorry, but can you please tell me what you did to make it work with your P990i? I'm trying but I can't...

Thanks!

I connect my P990i by bluetooth, because no driver USB for Vista.

I can receive or send a call, and i've this error message when i try to synchronize my contacts.

The problem is : FJ don't want create a version of MPE for Symbian, because he think than it's to expensive and there are just 10 user of symbian in the world

There are more then 10 users
The probem is not that its expensive for me, i don't know where you heart this idea.
The problem is its very much work and i have no time for this

How much to develop this feature ? I think than a lot of user can to pay by paypal this developpement

for SE phones that needs to backup SMSes onto ur PC, please try this free app. It works well for my SE M600i

http://www.olamelen.com/

have a nice day!