FJ Software

Hi, great looking code.

One problem I seem to have is uploading contact data to the phone when the length (in characters) of all the fields exceeds something a little over 100. For example when you have a couple of telephone numbers, an address and a couple of emails for a contact, say 130 characters in total, when I synchronize with the phone I get the error "Connection to phone not possible!". If I click "OK" it continues on with the remaining contacts and stops again when it finds another that is too long. The contacts it has errors with don't make it to the phone.

Strangely I can download a long contact from the phone but even if I *delete* a character, say from the address, from within MyPhoneExplorer and then try to re-synchronise I get the above error again. So it seems the problem is only one way: MyPhoneExplorer -> phone

- phone=w850i
- connection=USB
- MPE-version=1.5.7
- Windows version=WinXP-SP2

Can you help with this frustration?

Many thanks.

You have set the wrong COM-Port.
If you cannot fix it:
- connect the phone with the cable
- start MyPhoneExplorer
- post the first ten lines of the logfile (C:\Programs\MyPhoneExplorer\Debug.txt)

I have tried all the available COM ports (only one works at all with the USB) so don't think that is it. Below is the debug.txt as requested.

Logdatei MyPhoneExplorer
************************
Programmversion: 1.5.7
Datum: 29/12/2006


10:44:54.45 Setting Port: 6
10:44:54.46 Setting Baud: 921600
10:44:54.46 Avaiable Ports: COM1=\Device\Serial0; COM3=\Device\SE26mdm0; COM4=\Device\SE26mdm1; COM5=\Device\SE26obex0; COM6=\Device\SE26mgmt0;
10:44:54.88 frmSplash geladen
10:44:55.78 Hauptfenster wird geladen
10:44:55.96 Sidebar fertig geladen
10:44:55.98 Farbschema wurde gelesen
10:44:56.07 UC SMS wird geladen
10:44:56.12 UC Phonebook wird geladen
10:44:56.13 UC Phonebook fertig geladen
10:44:56.13 UC Calls wird geladen
10:44:56.26 UC Organizer wird geladen
10:44:56.35 DoItemUpdate
10:44:56.40 DoItemUpdate fertig
10:44:56.54 UC Notes wird geladen
10:44:56.56 UC Calls wird geladen
10:44:56.67 Neue COM-Bibliothek wird verwendet
10:44:56.68 Settimeout: RT=2000 WT=200
10:44:57.18 Port 6 wurde geöffnet !

Interestingly I've got the Bluetooth connection working and all appears fine with that (the full size contacts are uploaded ok). So I can enjoy all the benefits of MyPhoneExplorer that way.

Thank you for looking at this.

COM3 and COM4 are the right ports on your system