Problem with obex error on samsung galaxy s

Gast

Hello,

I've red the faq's and tried to connect throudh both the usb and wifi option. I've tried the usb cable connect with both the samsung kies and 3rd party usb drivers. I use win 7 ultimate 64b.

Unfortunately i keep getting the obex error.

Log posted below.

Could someone please give me some advice?

Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.1
Datum: 23-6-2011

12:10:53.50 Setting Port: 999
12:10:53.50 Setting Baud: 115200
12:10:53.50 Avaiable Ports: COM1=\Device\Serial0;
12:10:53.54 Main Load frmSplash
12:10:53.59 Load frmSplash...
12:10:53.59 Show splash...
12:10:53.59 frmSplash geladen
12:10:54.66 Hauptfenster wird geladen
12:10:55.03 Sidebar fertig geladen
12:10:55.40 UC SMS wird geladen
12:10:55.45 UC Phonebook wird geladen
12:10:55.48 UC Phonebook fertig geladen
12:10:55.49 UC Calls wird geladen
12:10:55.51 UC Organizer wird geladen
12:10:55.59 Organizer initiated
12:10:55.61 Startpage=1
12:10:55.62 UC Filebrowser wird geladen
12:10:55.72 UC Filebrowser fertig geladen
12:10:55.72 UC AppBrowser wird geladen
12:10:55.74 UC Notes wird geladen
12:10:55.75 UC Calls wird geladen
12:10:55.80 Setting Lastuser: samsung GT-I9000 [351751040945753]
12:10:55.82 Lade Userdatenbank: samsung GT-I9000 [351751040945753]
12:10:56.04 Kontakte geladen
12:10:56.05 Anrufe geladen
12:10:56.06 LoadDatafile: Organizer.dat(45 Bytes)
12:10:56.06 DoItemUpdate
12:10:56.10 DoItemUpdate fertig
12:10:56.10 Organizer geladen
12:10:56.10 Notizen geladen
12:10:56.11 Load SMS Data...
12:10:56.13 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
12:10:56.13 SMS Data Loaded...
12:10:56.13 SMS geladen
12:10:56.44 Hauptfenster fertig geladen
12:10:56.74 Downloader: RC=6 BytesMax=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
12:11:01.01 DBT_DEVICEARRIVAL: COM3
12:11:05.00 Refresh ComDescriptions...
12:11:05.03 PORT: COM1 Enumerator=ACPI Displayed=Communicatiepoort InstanceID=ACPI\PNP0501\1
12:11:05.03 MODEM: COM3 Enumerator=USB Displayed=SAMSUNG Android USB Modem FriendlyName=SAMSUNG Android USB Modem InstanceID=USB\VID_04E8&PID_681C&MI_00\1000D42C84A1_00
12:11:08.67 RunADBCommand: start-server
12:11:13.58 ADB CommandResponse: * daemon not running. starting it now on port 5037 *
* daemon started successfully *
12:11:13.58 RunADBCommand: devices
12:11:13.89 ADB CommandResponse: List of devices attached
1000d42c84a1 device
12:11:13.89 Run DeviceTracker
12:11:13.90 Init Tracker
12:11:13.90 RunADBCommand: -s 1000d42c84a1 forward tcp:5210 tcp:5210
12:11:13.93 Device Tracker Message: OKAY00141000d42c84a1 device

12:11:14.20 ADB CommandResponse:
12:11:14.20 Try connecting to 127.0.0.1...
12:11:14.20 Socket closed
12:11:14.20 RunADBCommand: -s 1000d42c84a1 shell am start -n com.fjsoft.myphoneexplorer.client/.MainActivity --ez adb true
12:11:16.01 ADB CommandResponse: Starting: Intent { cmp=com.fjsoft.myphoneexplorer.client/.MainActivity (has extras) }

Error type 3

Error: Activity class {com.fjsoft.myphoneexplorer.client/com.fjsoft.myphoneexplorer.client.MainActivity} does not exist.
12:11:16.01 RunADBCommand: -s 1000d42c84a1 install "C:\Program Files (x86)\MyPhoneExplorer\mpeclient.apk"
12:11:21.93 ADB CommandResponse: pkg: /data/local/tmp/mpeclient.apk

Success
12:11:21.93 RunADBCommand: -s 1000d42c84a1 shell am start -n com.fjsoft.myphoneexplorer.client/.MainActivity --ez adb true
12:11:23.58 ADB CommandResponse: Starting: Intent { cmp=com.fjsoft.myphoneexplorer.client/.MainActivity (has extras) }
12:11:25.57 Try connecting to 127.0.0.1...
12:11:25.58 Socket closed
12:11:25.58 Connect to Android failed!
12:11:25.58 bOpened=False
12:11:25.58 Refresh ComDescriptions...
12:11:25.58 PORT: COM1 Enumerator=ACPI Displayed=Communicatiepoort InstanceID=ACPI\PNP0501\1
12:11:25.58 MODEM: COM3 Enumerator=USB Displayed=SAMSUNG Android USB Modem FriendlyName=SAMSUNG Android USB Modem InstanceID=USB\VID_04E8&PID_681C&MI_00\1000D42C84A1_00
12:11:25.58 ErrMsg: Connection to phone could not be established!
12:11:37.43 RunADBCommand: start-server
12:11:37.69 ADB CommandResponse:
12:11:37.69 RunADBCommand: devices
12:11:37.96 ADB CommandResponse: List of devices attached
1000d42c84a1 device
12:11:37.96 RunADBCommand: -s 1000d42c84a1 forward tcp:5210 tcp:5210
12:11:38.22 ADB CommandResponse:
12:11:38.22 Try connecting to 127.0.0.1...
12:11:38.33 Connect to Android OK
12:11:38.33 Settimeout: RT=2000 WT=500
12:11:38.33 bOpened=True
12:11:38.33 [TX]: AT+CGSN
12:11:38.43 [RX]: AT+CGSN
12:11:38.43 [RX]: 351751040945753
12:11:38.43 [RX]: OK
12:11:38.43 Settimeout: RT=15000 WT=1000
12:11:38.43 [TX]: AT*PIN?
12:11:38.45 [RX]: AT*PIN?
12:11:38.45 [RX]: *PIN: ACCESS OK,10
12:11:38.45 [RX]: OK
12:11:38.45 [TX]: ATI
12:11:38.46 [RX]: ATI
12:11:38.46 [RX]: samsung GT-I9000
12:11:38.46 [RX]: OK
12:11:38.46 [TX]: AT*APPVERSION=1.8.1
12:11:38.47 [RX]: AT*APPVERSION=1.8.1
12:11:38.47 [RX]: 8,1.0.7
12:11:38.47 [RX]: OK
12:11:38.47 [TX]: AT+CSCS="UTF-8"
12:11:38.48 [RX]: AT+CSCS="UTF-8"
12:11:38.48 [RX]: OK
12:11:38.48 [TX]: AT+CNMI=2,1,0,1
12:11:38.49 [RX]: AT+CNMI=2,1,0,1
12:11:38.49 [RX]: ERROR
12:11:38.49 [TX]: AT*ECAM=1
12:11:38.50 [RX]: AT*ECAM=1
12:11:38.50 [RX]: OK
12:11:38.50 [TX]: AT+CIND=?
12:11:38.51 [RX]: AT+CIND=?
12:11:38.51 [RX]: ERROR
12:11:38.51 [TX]: AT+CBC
12:11:38.52 [RX]: AT+CBC
12:11:38.52 [RX]: +CBC: 1,91
12:11:38.53 [RX]: OK
12:11:38.53 [TX]: AT+CSQ
12:11:38.54 [RX]: AT+CSQ
12:11:38.54 [RX]: +CSQ: 20,99
12:11:38.54 [RX]: OK
12:11:38.54 Alle Verbindungsaktionen beendet
12:11:38.54 [TX]: AT*SOPS
12:11:38.55 [RX]: AT*SOPS
12:11:38.55 [RX]: *SOPS: NL TELFORT,20412,nl
12:11:38.55 [RX]: OK
12:11:38.63 Form_Activate fSync Operation=2
12:11:38.65 [TX]: AT+CPROT=0
12:11:38.66 [RX]: AT+CPROT=0
12:11:38.66 [RX]: CONNECT
12:11:38.66 OBEX Connect: 16384 Bytes Paketgröße, Target: IRMC-SYNC
12:11:38.66 [TX]: 80 00 13 10 00 40 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
12:11:39.70 [RX]: A0 00 18 10 00 FF FF CB 00 00 00 01 4A 00 0C 49 52 4D 43 2D 53 59 4E 43
12:11:39.70 Connection ID:1
12:11:39.70 Paketgröße: 16384, maximal möglich:65535
12:11:39.70 Ermittle und verarbeite info.log
12:11:39.71 Settimeout: RT=20000 WT=10000
12:11:39.71 OBEX Get: telecom/pb/info.log
12:11:39.71 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
12:11:43.18 [RX]: A0 00 19 49 00 16 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 31 34 32 34 36
12:11:43.18 ObexGet Fertig, Returncode=A0
12:11:43.18 Info.log:
Total-Records:14246
12:11:43.18 Settimeout: RT=90000 WT=10000
12:11:43.18 OBEX Get: telecom/pb/initsync
12:11:43.18 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 69 00 74 00 73 00 79 00 6E 00 63 00 00
12:13:13.17 [RX]: 00
12:13:13.17 Lesevorgang fehlerhaft! - Systemerror: 0 [De bewerking is voltooid.]
12:13:13.17 ObexGet Fertig, Returncode=0
12:13:13.17 OBEX Errorcode: 00 - Phone didn't answer
12:13:13.17 Settimeout: RT=20000 WT=10000
12:13:13.17 OBEX Get: telecom/pb/metadata.xml
12:13:13.17 [TX]: 83 00 3B CB 00 00 00 01 01 00 33 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6D 00 65 00 74 00 61 00 64 00 61 00 74 00 61 00 2E 00 78 00 6D 00 6C 00 00
12:13:33.17 [RX]: 00
12:13:33.17 Lesevorgang fehlerhaft! - Systemerror: 0 [De bewerking is voltooid.]
12:13:33.17 ObexGet Fertig, Returncode=0
12:13:33.17 OBEX Errorcode: 00 - Phone didn't answer
12:13:33.17 OBEX Get: telecom/pb/luid/cc.Log
12:13:33.17 [TX]: 83 00 39 CB 00 00 00 01 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 63 00 63 00 2E 00 4C 00 6F 00 67 00 00
12:13:53.17 [RX]: 00
12:13:53.17 Lesevorgang fehlerhaft! - Systemerror: 0 [De bewerking is voltooid.]
12:13:53.17 ObexGet Fertig, Returncode=0
12:13:53.17 OBEX Errorcode: 00 - Phone didn't answer
12:13:53.17 Settimeout: RT=15000 WT=1000
12:13:53.17 OBEX Disconnect
12:13:53.17 Settimeout: RT=10000 WT=10000
12:13:53.17 [TX]: 81 00 08 CB 00 00 00 01
12:14:03.17 [RX]: 00
12:14:03.17 Lesevorgang fehlerhaft! - Systemerror: 0 [De bewerking is voltooid.]
12:14:03.17 Disconnect answered...
12:14:03.17 [TX]: AT*SOPS
12:14:13.17 Settimeout: RT=15000 WT=1000
12:14:13.17 [TX]: AT+CPROT=0
12:14:28.17 ErrMsg: Obex Protocol kon niet worden geïnitialiseerd!!
OBEX Error:
12:14:38.54 Settimeout: RT=3500 WT=800
12:14:38.54 [TX]: AT+CBC
12:14:42.04 Androidsocket wird geschlossen 7
12:14:42.04 Port wurde geschlossen
12:14:59.13 Device Tracker Message: 0000
12:14:59.63 DBT_DEVICEREMOVECOMPLETE: COM3
12:17:03.08 DBT_DEVICEARRIVAL: COM3
12:17:03.61 Device Tracker Message: 00151000d42c84a1 offline

12:17:04.61 Device Tracker Message: 00141000d42c84a1 device

12:17:07.08 Refresh ComDescriptions...
12:17:07.08 PORT: COM1 Enumerator=ACPI Displayed=Communicatiepoort InstanceID=ACPI\PNP0501\1
12:17:07.08 MODEM: COM3 Enumerator=USB Displayed=SAMSUNG Android USB Modem FriendlyName=SAMSUNG Android USB Modem InstanceID=USB\VID_04E8&PID_681C&MI_00\1000D42C84A1_00
12:17:30.54 Refresh ComDescriptions...
12:17:30.55 PORT: COM1 Enumerator=ACPI Displayed=Communicatiepoort InstanceID=ACPI\PNP0501\1
12:17:30.55 MODEM: COM3 Enumerator=USB Displayed=SAMSUNG Android USB Modem FriendlyName=SAMSUNG Android USB Modem InstanceID=USB\VID_04E8&PID_681C&MI_00\1000D42C84A1_00
12:17:31.06 StickyNotesPath=C:\Windows\Sysnative\StikyNot.exe FileExists=True
12:17:31.08 StickyNotesTitle=Plaknotities
12:17:39.76 Device Tracker Message: 0000
12:17:40.23 DBT_DEVICEREMOVECOMPLETE: COM3
12:18:00.28 Refresh ComDescriptions...
12:18:00.29 PORT: COM1 Enumerator=ACPI Displayed=Communicatiepoort InstanceID=ACPI\PNP0501\1
12:18:05.35 OK pressed in settingswindow
12:18:05.37 Set first swap of settings
12:18:05.37 Apply new holidays
12:18:05.38 DoItemUpdate
12:18:05.40 DoItemUpdate fertig
12:18:05.41 Holidays applied
12:18:05.41 Second swap of settings set
12:18:05.41 Everything is done
12:18:08.71 Broadcaster started
12:18:08.71 Sending broadcast
12:18:08.79 Got Broadcast: 002915373C17162E1D095E5F42533F0F06333A1C1D1F19480B021E077B686B6E7D410F5850480505010679607C6B664E4658190A535D43432337651807543A52554902
12:18:08.79 Try connecting to 192.168.1.8...
12:18:08.80 Connect to Android OK
12:18:08.80 Settimeout: RT=2000 WT=500
12:18:08.80 bOpened=True
12:18:08.80 [TX]: AT+CGSN
12:18:08.93 [RX]: AT+CGSN
12:18:08.93 [RX]: 351751040945753
12:18:08.93 [RX]: OK
12:18:08.93 Settimeout: RT=15000 WT=1000
12:18:08.93 [TX]: AT*PIN?
12:18:08.95 [RX]: AT*PIN?
12:18:08.95 [RX]: *PIN: ACCESS OK,10
12:18:08.95 [RX]: OK
12:18:08.95 [TX]: ATI
12:18:08.98 [RX]: ATI
12:18:08.98 [RX]: samsung GT-I9000
12:18:08.98 [RX]: OK
12:18:08.98 [TX]: AT*APPVERSION=1.8.1
12:18:08.99 [RX]: AT*APPVERSION=1.8.1
12:18:08.99 [RX]: 8,1.0.10
12:18:08.99 [RX]: OK
12:18:08.99 [TX]: AT+CSCS="UTF-8"
12:18:08.99 [RX]: AT+CSCS="UTF-8"
12:18:08.99 [RX]: OK
12:18:09.00 [TX]: AT+CNMI=2,1,0,1
12:18:09.00 [RX]: AT+CNMI=2,1,0,1
12:18:09.00 [RX]: ERROR
12:18:09.00 [TX]: AT*ECAM=1
12:18:09.01 [RX]: AT*ECAM=1
12:18:09.01 [RX]: OK
12:18:09.01 [TX]: AT+CIND=?
12:18:09.02 [RX]: AT+CIND=?
12:18:09.02 [RX]: ERROR
12:18:09.02 [TX]: AT+CBC
12:18:09.03 [RX]: AT+CBC
12:18:09.03 [RX]: +CBC: 0,90
12:18:09.03 [RX]: OK
12:18:09.03 [TX]: AT+CSQ
12:18:09.04 [RX]: AT+CSQ
12:18:09.04 [RX]: +CSQ: 12,99
12:18:09.04 [RX]: OK
12:18:09.05 Alle Verbindungsaktionen beendet
12:18:09.11 Form_Activate fSync Operation=2
12:18:09.13 [TX]: AT+CPROT=0
12:18:09.14 [RX]: AT+CPROT=0
12:18:09.14 [RX]: CONNECT
12:18:09.14 OBEX Connect: 16384 Bytes Paketgröße, Target: IRMC-SYNC
12:18:09.14 [TX]: 80 00 13 10 00 40 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
12:18:11.07 [RX]: A0 00 18 10 00 FF FF CB 00 00 00 01 4A 00 0C 49 52 4D 43 2D 53 59 4E 43
12:18:11.07 Connection ID:1
12:18:11.07 Paketgröße: 16384, maximal möglich:65535
12:18:11.08 Ermittle und verarbeite info.log
12:18:11.08 Settimeout: RT=20000 WT=10000
12:18:11.08 OBEX Get: telecom/pb/info.log
12:18:11.08 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
12:18:14.09 [RX]: A0 00 19 49 00 16 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 31 34 32 34 36
12:18:14.09 ObexGet Fertig, Returncode=A0
12:18:14.09 Info.log:
Total-Records:14246
12:18:14.09 Settimeout: RT=90000 WT=10000
12:18:14.09 OBEX Get: telecom/pb/initsync
12:18:14.09 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 69 00 74 00 73 00 79 00 6E 00 63 00 00
12:19:44.09 [RX]: 00
12:19:44.09 Lesevorgang fehlerhaft! - Systemerror: 0 [De bewerking is voltooid.]
12:19:44.09 ObexGet Fertig, Returncode=0
12:19:44.09 OBEX Errorcode: 00 - Phone didn't answer
12:19:44.09 Settimeout: RT=20000 WT=10000
12:19:44.09 OBEX Get: telecom/pb/metadata.xml
12:19:44.09 [TX]: 83 00 3B CB 00 00 00 01 01 00 33 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6D 00 65 00 74 00 61 00 64 00 61 00 74 00 61 00 2E 00 78 00 6D 00 6C 00 00
12:20:04.09 [RX]: 00
12:20:04.09 Lesevorgang fehlerhaft! - Systemerror: 0 [De bewerking is voltooid.]
12:20:04.09 ObexGet Fertig, Returncode=0
12:20:04.09 OBEX Errorcode: 00 - Phone didn't answer
12:20:04.09 OBEX Get: telecom/pb/luid/cc.Log
12:20:04.09 [TX]: 83 00 39 CB 00 00 00 01 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 63 00 63 00 2E 00 4C 00 6F 00 67 00 00
12:20:24.09 [RX]: 00
12:20:24.09 Lesevorgang fehlerhaft! - Systemerror: 0 [De bewerking is voltooid.]
12:20:24.09 ObexGet Fertig, Returncode=0
12:20:24.09 OBEX Errorcode: 00 - Phone didn't answer
12:20:24.09 Settimeout: RT=15000 WT=1000
12:20:24.09 OBEX Disconnect
12:20:24.09 Settimeout: RT=10000 WT=10000
12:20:24.09 [TX]: 81 00 08 CB 00 00 00 01
12:20:34.09 [RX]: 00
12:20:34.09 Lesevorgang fehlerhaft! - Systemerror: 0 [De bewerking is voltooid.]
12:20:34.09 Disconnect answered...
12:20:34.09 [TX]: AT*SOPS
12:20:44.30 Settimeout: RT=15000 WT=1000
12:20:44.30 [TX]: AT+CPROT=0
12:20:59.29 ErrMsg: Obex Protocol kon niet worden geïnitialiseerd!!
OBEX Error:
12:21:55.62 Refresh ComDescriptions...
12:21:55.62 PORT: COM1 Enumerator=ACPI Displayed=Communicatiepoort InstanceID=ACPI\PNP0501\1

Verfasst am: Mo Jun 27, 2011 23:53

Zitat:

Total-Records:14246

You have too much contacts on phone and so the client cannot walk throught all entries until timeout. You could set up a contact-account-filter in the settings of the client to reduce the synced amount

Verfasst am: Mi Jun 29, 2011 20:39

Thanks, I discovered that all my contacts been duplicated, up to 250 times!

Used google to remove the excess entries.

Thank you ffor the effort.

Informationen zum Datenschutz auf dieser Website