FJ Software

I am unable to sync my contacts between MPE and my HTC Wildfire.

I keep getting obex error or the MPE Client on my Wildfire force closes or sometimes MPE crashes on my PC.

Would highly appreciate a solution about this issue. Thanks.

Here is the log file.

Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.0
Datum: 10/14/2010

16:49:39.87 Setting Port: 999
16:49:39.87 Setting Baud: 921600
16:49:39.87 Avaiable Ports: COM1=\Device\Serial0; COM12=\Device\Serial11; COM13=\Device\Serial12; COM14=\Device\Serial13; COM19=\Device\Serial18; COM20=\Device\Serial19; COM21=\Device\Serial20; COM22=\Device\Serial21;
16:49:39.87 Main Load frmSplash
16:49:39.88 Load frmSplash...
16:49:40.04 Hauptfenster wird geladen
16:49:40.15 Sidebar fertig geladen
16:49:40.18 UC SMS wird geladen
16:49:40.23 UC Phonebook wird geladen
16:49:40.26 UC Phonebook fertig geladen
16:49:40.26 UC Calls wird geladen
16:49:40.28 UC Organizer wird geladen
16:49:40.34 Organizer initiated
16:49:40.35 Startpage=1
16:49:40.37 UC Filebrowser wird geladen
16:49:40.42 UC Filebrowser fertig geladen
16:49:40.42 UC AppBrowser wird geladen
16:49:40.42 UC Notes wird geladen
16:49:40.43 UC Calls wird geladen
16:49:40.50 RunADBCommand: start-server
16:49:44.79 ADB CommandResponse: * daemon not running. starting it now *
* daemon started successfully *
16:49:44.79 RunADBCommand: devices
16:49:44.85 ADB CommandResponse: List of devices attached
HT09VPY02888 device
16:49:44.85 Run DeviceTracker
16:49:44.88 Init Tracker
16:49:44.88 RunADBCommand: forward tcp:5210 tcp:5210
16:49:44.92 Device Tracker Message: OKAY0014HT09VPY02888 device

16:49:44.93 ADB CommandResponse:
16:49:44.93 Try connecting to 127.0.0.1...
16:49:45.06 Connect to Android OK
16:49:45.06 Settimeout: RT=2000 WT=500
16:49:45.06 bOpened=True
16:49:45.06 [TX]: AT+CGSN
16:49:45.13 [RX]: AT+CGSN
16:49:45.13 [RX]: 359028039446297
16:49:45.13 [RX]: OK
16:49:45.13 Settimeout: RT=15000 WT=1000
16:49:45.13 [TX]: ATI
16:49:45.17 [RX]: ATI
16:49:45.17 [RX]: HTC Wildfire
16:49:45.17 [RX]: OK
16:49:45.17 [TX]: AT*APPVERSION
16:49:45.20 [RX]: AT*APPVERSION
16:49:45.20 [RX]: 7,1.0.4
16:49:45.20 [RX]: OK
16:49:45.20 [TX]: AT+CSCS="UTF-8"
16:49:45.23 [RX]: AT+CSCS="UTF-8"
16:49:45.23 [RX]: OK
16:49:45.23 [TX]: AT+CNMI=2,1,0,1
16:49:45.26 [RX]: AT+CNMI=2,1,0,1
16:49:45.26 [RX]: ERROR
16:49:45.26 [TX]: AT*ECAM=1
16:49:45.29 [RX]: AT*ECAM=1
16:49:45.29 [RX]: OK
16:49:45.29 [TX]: AT+CIND=?
16:49:45.32 [RX]: AT+CIND=?
16:49:45.32 [RX]: ERROR
16:49:45.32 [TX]: AT+CBC
16:49:45.35 [RX]: AT+CBC
16:49:45.35 [RX]: +CBC: 1,68
16:49:45.35 [RX]: OK
16:49:45.35 [TX]: AT+CSQ
16:49:45.38 [RX]: AT+CSQ
16:49:45.38 [RX]: +CSQ: 25,99
16:49:45.38 [RX]: OK
16:49:45.38 Alle Verbindungsaktionen beendet
16:49:45.38 [TX]: AT*SOPS
16:49:45.42 [RX]: AT*SOPS
16:49:45.42 [RX]: *SOPS: Vodafone IN,40420,in
16:49:45.42 [RX]: OK
16:49:45.45 Lade Userdatenbank: HTC Wildfire [359028039446297]
16:49:45.62 LoadDatafile: Phonebook.dat(1366819 Bytes)
16:49:46.17 Kontakte geladen
16:49:46.18 LoadDatafile: Calls.dat(5418 Bytes)
16:49:46.29 Anrufe geladen
16:49:46.31 LoadDatafile: Organizer.dat(29907 Bytes)
16:49:46.38 DoItemUpdate
16:49:46.48 DoItemUpdate fertig
16:49:46.63 Organizer geladen
16:49:46.63 Notizen geladen
16:49:46.65 Load SMS Data...
16:49:46.65 LoadDatafile: SMS.dat(9172 Bytes)
16:49:46.65 SMS - Datenbank wird geladen...
16:49:46.67 SMS Laden - Readfile: 0 Split: 0 Parse: 15 HandleMultiSMS: 0 Nachrichten: 32
16:49:46.67 LoadDatafile: SMSArchive.dat(39652 Bytes)
16:49:46.67 SMS Archiv laden - Parse: 0
16:49:46.76 RefreshList (Archive): Addrows=31 Sort=0 MenuUpdate=16 Redraw=0
16:49:46.79 SMS Data Loaded...
16:49:46.79 SMS geladen
16:49:46.96 Hauptfenster fertig geladen
16:49:47.59 Downloader: RC=6 BytesMax=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
16:49:55.15 [TX]: AT+CBC
16:49:55.18 [RX]: AT+CBC
16:49:55.18 [RX]: +CBC: 1,68
16:49:55.18 [RX]: OK
16:49:55.20 Form_Activate fSync Operation=2
16:49:55.21 [TX]: AT+CPROT=0
16:49:55.25 [RX]: AT+CPROT=0
16:49:55.25 [RX]: CONNECT
16:49:55.25 OBEX Connect: 4096 Bytes Paketgröße, Target: IRMC-SYNC
16:49:55.25 [TX]: 80 00 13 10 00 10 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
16:49:55.43 [RX]: A0 00 18 10 00 FF FF CB 00 00 00 01 4A 00 0C 49 52 4D 43 2D 53 59 4E 43
16:49:55.43 Connection ID:1
16:49:55.43 Paketgröße: 4096, maximal möglich:65535
16:49:55.43 Ermittle und verarbeite info.log
16:49:55.43 Settimeout: RT=20000 WT=10000
16:49:55.43 OBEX Get: telecom/pb/info.log
16:49:55.43 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
16:49:55.59 [RX]: A0 00 18 49 00 15 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 31 36 37 30
16:49:55.59 ObexGet Fertig, Returncode=A0
16:49:55.59 Info.log:
Total-Records:1670
16:49:55.59 Settimeout: RT=60000 WT=10000
16:49:55.59 OBEX Get: telecom/pb/initsync
16:49:55.59 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 69 00 74 00 73 00 79 00 6E 00 63 00 00
16:50:55.59 [RX]: 00
16:50:55.59 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
16:50:55.59 ObexGet Fertig, Returncode=0
16:50:55.59 OBEX Errorcode: 00 - Phone didn't answer
16:50:55.59 Settimeout: RT=20000 WT=10000
16:50:55.59 OBEX Get: telecom/pb/luid/cc.Log
16:50:55.59 [TX]: 83 00 39 CB 00 00 00 01 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 63 00 63 00 2E 00 4C 00 6F 00 67 00 00
16:51:15.59 [RX]: 00
16:51:15.59 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
16:51:15.59 ObexGet Fertig, Returncode=0
16:51:15.59 OBEX Errorcode: 00 - Phone didn't answer
16:51:15.59 Settimeout: RT=15000 WT=1000
16:51:15.59 OBEX Disconnect
16:51:15.59 Settimeout: RT=10000 WT=10000
16:51:15.59 [TX]: 81 00 08 CB 00 00 00 01
16:51:23.12 [RX]: A0 00 03
16:51:23.12 Disconnect answered...
16:51:23.12 Disconnect hat funktioniert
16:51:23.12 [TX]: AT*SOPS
16:51:23.17 [RX]:  
I 1727  AT*SOPS
16:51:23.17 [RX]: *SOPS: Vodafone IN,40420,in
16:51:23.17 [RX]: OK
16:51:23.17 Settimeout: RT=15000 WT=1000
16:51:23.17 [TX]: AT+CPROT=0
16:51:23.20 [RX]: AT+CPROT=0
16:51:23.20 [RX]: CONNECT
16:51:23.20 OBEX Connect: 4096 Bytes Paketgröße, Target: IRMC-SYNC
16:51:23.20 [TX]: 80 00 13 10 00 10 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
16:51:23.34 [RX]: A0 00 18 10 00 FF FF CB 00 00 00 01 4A 00 0C 49 52 4D 43 2D 53 59 4E 43
16:51:23.34 Connection ID:1
16:51:23.34 Paketgröße: 4096, maximal möglich:65535
16:51:23.34 Ermittle und verarbeite info.log
16:51:23.34 Settimeout: RT=20000 WT=10000
16:51:23.34 OBEX Get: telecom/pb/info.log
16:51:23.34 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
16:51:23.48 [RX]: A0 00 18 49 00 15 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 31 36 37 30
16:51:23.48 ObexGet Fertig, Returncode=A0
16:51:23.48 Info.log:
Total-Records:1670
16:51:23.48 Settimeout: RT=60000 WT=10000
16:51:23.48 OBEX Get: telecom/pb/initsync
16:51:23.48 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 69 00 74 00 73 00 79 00 6E 00 63 00 00
16:52:23.48 [RX]: 00
16:52:23.48 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
16:52:23.48 ObexGet Fertig, Returncode=0
16:52:23.48 OBEX Errorcode: 00 - Phone didn't answer
16:52:23.48 Settimeout: RT=20000 WT=10000
16:52:23.48 OBEX Get: telecom/pb.vcf
16:52:23.48 [TX]: 83 00 29 CB 00 00 00 01 01 00 21 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2E 00 76 00 63 00 66 00 00
16:52:43.48 [RX]: 00
16:52:43.48 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
16:52:43.48 ObexGet Fertig, Returncode=0
16:52:43.48 OBEX Errorcode: 00 - Phone didn't answer
16:52:43.48 OBEX Get: telecom/pb/luid/cc.Log
16:52:43.48 [TX]: 83 00 39 CB 00 00 00 01 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 63 00 63 00 2E 00 4C 00 6F 00 67 00 00
16:52:53.70 [RX]: A0 00 03
16:52:53.70 ObexGet Fertig, Returncode=A0
16:52:53.90 OBEX Get: telecom/pb/luid/-1.log
16:52:53.90 [TX]: 83 00 39 CB 00 00 00 01 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 2D 00 31 00 2E 00 6C 00 6F 00 67 00 00
16:52:57.10 Socket closed
16:52:57.10 CheckCOM did not work, force closing Socket
16:52:57.10 Port wurde geschlossen
16:53:13.90 [RX]: 00
16:53:13.90 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
16:53:13.90 ObexGet Fertig, Returncode=0
16:53:13.90 OBEX Errorcode: 00 - Phone didn't answer
16:53:13.90 Current ChangeCounter:-1 Old ChangeCounter:-1
16:53:13.90 OBEX Put: telecom/pb/luid/.vcf DataLen=85
16:53:13.90 [TX]: 82 00 92 CB 00 00 00 01 01 00 2D 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 2E 00 76 00 63 00 66 00 00 C3 00 00 00 55 49 00 58 42 45 47 49 4E 3A 56 43 41 52 44 0D 0A 56 45 52 53 49 4F 4E 3A 32 2E 31 0D 0A 4E 3A 48 65 6D 75 3B 42 0D 0A 54 45 4C 3B 43 45 4C 4C 3B 58 2D 53 59 4E 43 4D 4C 52 45 46 37 32 33 33 3A 2B 39 31 39 39 38 37 30 38 38 38 30 31 0D 0A 45 4E 44 3A 56 43 41 52 44
16:53:13.90 Gesendete Bytes: 0 von 146 - Systemerror: 0 [The operation completed successfully.]
16:53:13.90 ErrMsg: Connection to phone not possible!
16:53:33.76 Terminate Subclass
16:53:33.76 Terminate ADO
16:53:33.76 Unload Iconlib
16:53:33.76 Terminate Tray
16:53:33.76 Killing temporary Files
16:53:33.76 Terminate: Calls
16:53:33.76 Terminate: PB
16:53:33.82 SaveDatafile: Phonebook.dat (1358759 Bytes)
16:53:33.88 Terminate: Notes
16:53:33.90 Terminate: Organizer
16:53:33.93 SaveDatafile: Organizer.dat (29907 Bytes)
16:53:33.95 Terminate: SMS
16:53:33.96 ClosePort
16:53:33.96 Port wurde geschlossen
16:53:33.96 Form_QueryUnload -> Ende
16:53:33.96 Unload: frmSplash
16:53:33.96 Unload: fSocket
16:53:33.96 Form_Unload -> Ende

You have a really high amount of contacts in your phone. This raises your problems. You can try it again but after freeing up some memory. Just kill some tasks with tools like "Advanced Task Killer". If this does not help then i could increase the timeout in MyPhoneExplorer.

Firstly thanks for your super quick response.

I uninstalled a lot of games and apps and freed around 50MB but still it didn't help. Either the app crashes or obex error or the MPE Client force closes still.

The latest log is here.

Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.0
Datum: 10/14/2010

18:12:24.96 Setting Port: 999
18:12:24.96 Setting Baud: 921600
18:12:24.96 Avaiable Ports: COM1=\Device\Serial0; COM12=\Device\Serial11; COM13=\Device\Serial12; COM14=\Device\Serial13; COM19=\Device\Serial18; COM20=\Device\Serial19; COM21=\Device\Serial20; COM22=\Device\Serial21;
18:12:24.96 Main Load frmSplash
18:12:24.98 Load frmSplash...
18:12:25.21 Hauptfenster wird geladen
18:12:25.43 Sidebar fertig geladen
18:12:25.50 UC SMS wird geladen
18:12:25.57 UC Phonebook wird geladen
18:12:25.65 UC Phonebook fertig geladen
18:12:25.65 UC Calls wird geladen
18:12:25.70 UC Organizer wird geladen
18:12:25.78 Organizer initiated
18:12:25.82 Startpage=1
18:12:25.82 UC Filebrowser wird geladen
18:12:25.88 UC Filebrowser fertig geladen
18:12:25.88 UC AppBrowser wird geladen
18:12:25.90 UC Notes wird geladen
18:12:25.92 UC Calls wird geladen
18:12:26.00 RunADBCommand: start-server
18:12:26.03 ADB CommandResponse:
18:12:26.03 RunADBCommand: devices
18:12:26.07 ADB CommandResponse: List of devices attached
HT09VPY02888 device
18:12:26.07 Run DeviceTracker
18:12:26.09 Init Tracker
18:12:26.09 RunADBCommand: forward tcp:5210 tcp:5210
18:12:26.09 Device Tracker Message: OKAY0014HT09VPY02888 device

18:12:26.12 ADB CommandResponse:
18:12:26.12 Try connecting to 127.0.0.1...
18:12:26.12 Socket closed
18:12:26.12 RunADBCommand: shell am start -n com.fjsoft.myphoneexplorer.client/.MainActivity --ez adb true
18:12:27.57 ADB CommandResponse: Starting: Intent { cmp=com.fjsoft.myphoneexplorer.client/.MainActivity (has extras) }
18:12:29.07 Try connecting to 127.0.0.1...
18:12:29.07 Connect to Android OK
18:12:29.07 Settimeout: RT=2000 WT=500
18:12:29.07 bOpened=True
18:12:29.07 [TX]: AT+CGSN
18:12:30.21 [RX]: AT+CGSN
18:12:30.21 [RX]: 359028039446297
18:12:30.21 [RX]: OK
18:12:30.21 Settimeout: RT=15000 WT=1000
18:12:30.21 [TX]: ATI
18:12:30.23 [RX]: ATI
18:12:30.23 [RX]: HTC Wildfire
18:12:30.23 [RX]: OK
18:12:30.23 [TX]: AT*APPVERSION
18:12:30.35 [RX]: AT*APPVERSION
18:12:30.35 [RX]: 7,1.0.4
18:12:30.35 [RX]: OK
18:12:30.35 [TX]: AT+CSCS="UTF-8"
18:12:30.40 [RX]: AT+CSCS="UTF-8"
18:12:30.40 [RX]: OK
18:12:30.40 [TX]: AT+CNMI=2,1,0,1
18:12:30.43 [RX]: AT+CNMI=2,1,0,1
18:12:30.43 [RX]: ERROR
18:12:30.43 [TX]: AT*ECAM=1
18:12:30.48 [RX]: AT*ECAM=1
18:12:30.48 [RX]: OK
18:12:30.48 [TX]: AT+CIND=?
18:12:30.53 [RX]: AT+CIND=?
18:12:30.53 [RX]: ERROR
18:12:30.53 [TX]: AT+CBC
18:12:30.56 [RX]: AT+CBC
18:12:30.56 [RX]: +CBC: 1,73
18:12:30.56 [RX]: OK
18:12:30.56 [TX]: AT+CSQ
18:12:30.57 [RX]: AT+CSQ
18:12:30.57 [RX]: +CSQ: 23,99
18:12:30.59 [RX]: OK
18:12:30.59 Alle Verbindungsaktionen beendet
18:12:30.59 [TX]: AT*SOPS
18:12:30.60 [RX]: AT*SOPS
18:12:30.60 [RX]: *SOPS: Vodafone IN,40420,in
18:12:30.60 [RX]: OK
18:12:30.65 Lade Userdatenbank: HTC Wildfire [359028039446297]
18:12:30.82 LoadDatafile: Phonebook.dat(1358759 Bytes)
18:12:31.37 Kontakte geladen
18:12:31.38 LoadDatafile: Calls.dat(5616 Bytes)
18:12:31.51 Anrufe geladen
18:12:31.53 LoadDatafile: Organizer.dat(29907 Bytes)
18:12:31.60 DoItemUpdate
18:12:31.70 DoItemUpdate fertig
18:12:31.93 Organizer geladen
18:12:31.93 Notizen geladen
18:12:31.93 Load SMS Data...
18:12:31.93 LoadDatafile: SMS.dat(10368 Bytes)
18:12:31.93 SMS - Datenbank wird geladen...
18:12:31.96 SMS Laden - Readfile: 0 Split: 0 Parse: 31 HandleMultiSMS: 0 Nachrichten: 37
18:12:31.96 LoadDatafile: SMSArchive.dat(39652 Bytes)
18:12:31.96 SMS Archiv laden - Parse: 0
18:12:32.06 RefreshList (Archive): Addrows=31 Sort=0 MenuUpdate=0 Redraw=16
18:12:32.10 SMS Data Loaded...
18:12:32.10 SMS geladen
18:12:32.28 Hauptfenster fertig geladen
18:12:32.92 Downloader: RC=6 BytesMax=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
18:12:35.93 [TX]: AT+CBC
18:12:35.95 [RX]: AT+CBC
18:12:35.95 [RX]: +CBC: 1,73
18:12:35.95 [RX]: OK
18:12:35.98 Form_Activate fSync Operation=2
18:12:36.00 [TX]: AT+CPROT=0
18:12:36.01 [RX]: AT+CPROT=0
18:12:36.01 [RX]: CONNECT
18:12:36.01 OBEX Connect: 4096 Bytes Paketgröße, Target: IRMC-SYNC
18:12:36.01 [TX]: 80 00 13 10 00 10 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
18:12:36.82 [RX]: A0 00 18 10 00 FF FF CB 00 00 00 01 4A 00 0C 49 52 4D 43 2D 53 59 4E 43
18:12:36.82 Connection ID:1
18:12:36.82 Paketgröße: 4096, maximal möglich:65535
18:12:36.82 Ermittle und verarbeite info.log
18:12:36.82 Settimeout: RT=20000 WT=10000
18:12:36.82 OBEX Get: telecom/pb/info.log
18:12:36.82 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
18:12:36.96 [RX]: A0 00 18 49 00 15 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 31 36 37 31
18:12:36.96 ObexGet Fertig, Returncode=A0
18:12:36.96 Info.log:
Total-Records:1671
18:12:36.96 Settimeout: RT=60000 WT=10000
18:12:36.96 OBEX Get: telecom/pb/initsync
18:12:36.96 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 69 00 74 00 73 00 79 00 6E 00 63 00 00
18:13:36.96 [RX]: 00
18:13:36.96 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
18:13:36.96 ObexGet Fertig, Returncode=0
18:13:36.96 OBEX Errorcode: 00 - Phone didn't answer
18:13:36.96 Settimeout: RT=20000 WT=10000
18:13:36.96 OBEX Get: telecom/pb/luid/cc.Log
18:13:36.96 [TX]: 83 00 39 CB 00 00 00 01 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 63 00 63 00 2E 00 4C 00 6F 00 67 00 00
18:13:56.96 [RX]: 00
18:13:56.96 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
18:13:56.96 ObexGet Fertig, Returncode=0
18:13:56.96 OBEX Errorcode: 00 - Phone didn't answer
18:13:56.96 Settimeout: RT=15000 WT=1000
18:13:56.96 OBEX Disconnect
18:13:56.96 Settimeout: RT=10000 WT=10000
18:13:56.96 [TX]: 81 00 08 CB 00 00 00 01
18:14:06.96 [RX]: 00
18:14:06.96 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
18:14:06.96 Disconnect answered...
18:14:06.96 [TX]: AT*SOPS
18:14:16.96 Settimeout: RT=15000 WT=1000
18:14:16.96 [TX]: AT+CPROT=0
18:14:19.50 [RX]:    
I 1850  AT*SOPSAT+CPROT=0
18:14:19.50 [RX]: ERROR
18:14:19.50 [TX]: AT*EOBEX
18:14:19.51 [RX]: AT*EOBEX
18:14:19.51 [RX]: ERROR
18:14:19.51 ErrMsg: Obex protocol could not be initialized!
OBEX Error: ERROR
18:14:25.32 [TX]: AT+CBC
18:14:25.34 [RX]: AT+CBC
18:14:25.34 [RX]: +CBC: 1,73
18:14:25.34 [RX]: OK
18:14:25.35 Form_Activate fSync Operation=2
18:14:25.37 [TX]: AT*EOBEX
18:14:25.38 [RX]: AT*EOBEX
18:14:25.38 [RX]: ERROR
18:14:25.38 ErrMsg: Obex protocol could not be initialized!
OBEX Error: ERROR
18:14:28.10 Androidsocket wird geschlossen 7
18:14:28.10 Port wurde geschlossen
18:14:29.78 RunADBCommand: start-server
18:14:29.81 ADB CommandResponse:
18:14:29.81 RunADBCommand: devices
18:14:29.84 ADB CommandResponse: List of devices attached
HT09VPY02888 device
18:14:29.84 RunADBCommand: -s HT09VPY02888 forward tcp:5210 tcp:5210
18:14:29.87 ADB CommandResponse:
18:14:29.87 Try connecting to 127.0.0.1...
18:14:29.98 Connect to Android OK
18:14:29.98 Settimeout: RT=2000 WT=500
18:14:29.98 bOpened=True
18:14:29.98 [TX]: AT+CGSN
18:14:30.65 [RX]: AT+CGSN
18:14:30.65 [RX]: 359028039446297
18:14:30.65 [RX]: OK
18:14:30.65 Settimeout: RT=15000 WT=1000
18:14:30.65 [TX]: ATI
18:14:30.65 [RX]: ATI
18:14:30.65 [RX]: HTC Wildfire
18:14:30.65 [RX]: OK
18:14:30.67 [TX]: AT*APPVERSION
18:14:30.67 [RX]: AT*APPVERSION
18:14:30.67 [RX]: 7,1.0.4
18:14:30.67 [RX]: OK
18:14:30.67 [TX]: AT+CSCS="UTF-8"
18:14:30.68 [RX]: AT+CSCS="UTF-8"
18:14:30.68 [RX]: OK
18:14:30.68 [TX]: AT+CNMI=2,1,0,1
18:14:30.68 [RX]: AT+CNMI=2,1,0,1
18:14:30.68 [RX]: ERROR
18:14:30.70 [TX]: AT*ECAM=1
18:14:30.70 [RX]: AT*ECAM=1
18:14:30.70 [RX]: OK
18:14:30.70 [TX]: AT+CIND=?
18:14:30.71 [RX]: AT+CIND=?
18:14:30.71 [RX]: ERROR
18:14:30.71 [TX]: AT+CBC
18:14:30.71 [RX]: AT+CBC
18:14:30.71 [RX]: +CBC: 1,73
18:14:30.71 [RX]: OK
18:14:30.73 [TX]: AT+CSQ
18:14:30.73 [RX]: AT+CSQ
18:14:30.73 [RX]: +CSQ: 20,99
18:14:30.73 [RX]: OK
18:14:30.73 Alle Verbindungsaktionen beendet
18:14:30.73 [TX]: AT*SOPS
18:14:30.75 [RX]: AT*SOPS
18:14:30.75 [RX]: *SOPS: Vodafone IN,40420,in
18:14:30.75 [RX]: OK
18:14:33.00 [TX]: AT+CBC
18:14:33.01 [RX]: AT+CBC
18:14:33.01 [RX]: +CBC: 1,73
18:14:33.01 [RX]: OK
18:14:33.04 Form_Activate fSync Operation=2
18:14:33.06 [TX]: AT+CPROT=0
18:14:33.06 [RX]: AT+CPROT=0
18:14:33.06 [RX]: CONNECT
18:14:33.06 OBEX Connect: 4096 Bytes Paketgröße, Target: IRMC-SYNC
18:14:33.06 [TX]: 80 00 13 10 00 10 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
18:14:33.18 [RX]: A0 00 18 10 00 FF FF CB 00 00 00 01 4A 00 0C 49 52 4D 43 2D 53 59 4E 43
18:14:33.18 Connection ID:1
18:14:33.18 Paketgröße: 4096, maximal möglich:65535
18:14:33.18 Ermittle und verarbeite info.log
18:14:33.18 Settimeout: RT=20000 WT=10000
18:14:33.18 OBEX Get: telecom/pb/info.log
18:14:33.18 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
18:14:33.31 [RX]: A0 00 18 49 00 15 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 31 36 37 31
18:14:33.31 ObexGet Fertig, Returncode=A0
18:14:33.31 Info.log:
Total-Records:1671
18:14:33.31 Settimeout: RT=60000 WT=10000
18:14:33.31 OBEX Get: telecom/pb/initsync
18:14:33.31 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 69 00 74 00 73 00 79 00 6E 00 63 00 00
18:15:33.31 [RX]: 00
18:15:33.31 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
18:15:33.31 ObexGet Fertig, Returncode=0
18:15:33.31 OBEX Errorcode: 00 - Phone didn't answer
18:15:33.31 Settimeout: RT=20000 WT=10000
18:15:33.31 OBEX Get: telecom/pb/luid/cc.Log
18:15:33.31 [TX]: 83 00 39 CB 00 00 00 01 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 63 00 63 00 2E 00 4C 00 6F 00 67 00 00
18:15:53.31 [RX]: 00
18:15:53.31 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
18:15:53.31 ObexGet Fertig, Returncode=0
18:15:53.31 OBEX Errorcode: 00 - Phone didn't answer
18:15:53.31 Settimeout: RT=15000 WT=1000
18:15:53.31 OBEX Disconnect
18:15:53.31 Settimeout: RT=10000 WT=10000
18:15:53.31 [TX]: 81 00 08 CB 00 00 00 01
18:15:58.63 [RX]: A0 00 03
18:15:58.63 Disconnect answered...
18:15:58.63 Disconnect hat funktioniert
18:15:58.63 [TX]: AT*SOPS
18:15:58.68 [RX]:  
I 1850  AT*SOPS
18:15:58.68 [RX]: *SOPS: Vodafone IN,40420,in
18:15:58.68 [RX]: OK
18:15:58.68 Settimeout: RT=15000 WT=1000
18:15:58.68 [TX]: AT+CPROT=0
18:15:58.68 [RX]: AT+CPROT=0
18:15:58.68 [RX]: CONNECT
18:15:58.68 OBEX Connect: 4096 Bytes Paketgröße, Target: IRMC-SYNC
18:15:58.68 [TX]: 80 00 13 10 00 10 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
18:15:58.79 [RX]: A0 00 18 10 00 FF FF CB 00 00 00 01 4A 00 0C 49 52 4D 43 2D 53 59 4E 43
18:15:58.79 Connection ID:1
18:15:58.79 Paketgröße: 4096, maximal möglich:65535
18:15:58.79 Ermittle und verarbeite info.log
18:15:58.79 Settimeout: RT=20000 WT=10000
18:15:58.79 OBEX Get: telecom/pb/info.log
18:15:58.79 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
18:15:58.95 [RX]: A0 00 18 49 00 15 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 31 36 37 31
18:15:58.95 ObexGet Fertig, Returncode=A0
18:15:58.95 Info.log:
Total-Records:1671
18:15:58.95 Settimeout: RT=60000 WT=10000
18:15:58.95 OBEX Get: telecom/pb/initsync
18:15:58.95 [TX]: 83 00 33 CB 00 00 00 01 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 69 00 74 00 73 00 79 00 6E 00 63 00 00
18:16:58.95 [RX]: 00
18:16:58.95 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
18:16:58.95 ObexGet Fertig, Returncode=0
18:16:58.95 OBEX Errorcode: 00 - Phone didn't answer
18:16:58.95 Settimeout: RT=20000 WT=10000
18:16:58.95 OBEX Get: telecom/pb.vcf
18:16:58.95 [TX]: 83 00 29 CB 00 00 00 01 01 00 21 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2E 00 76 00 63 00 66 00 00
18:17:18.95 [RX]: 00
18:17:18.95 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
18:17:18.95 ObexGet Fertig, Returncode=0
18:17:18.95 OBEX Errorcode: 00 - Phone didn't answer
18:17:18.95 OBEX Get: telecom/pb/luid/cc.Log
18:17:18.95 [TX]: 83 00 39 CB 00 00 00 01 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 63 00 63 00 2E 00 4C 00 6F 00 67 00 00
18:17:19.81 [RX]: A0 00 03
18:17:19.81 ObexGet Fertig, Returncode=A0
18:17:20.03 OBEX Get: telecom/pb/luid/-1.log
18:17:20.03 [TX]: 83 00 39 CB 00 00 00 01 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 2D 00 31 00 2E 00 6C 00 6F 00 67 00 00
18:17:40.03 [RX]: 00
18:17:40.03 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
18:17:40.03 ObexGet Fertig, Returncode=0
18:17:40.03 OBEX Errorcode: 00 - Phone didn't answer
18:17:40.03 Current ChangeCounter:-1 Old ChangeCounter:-1
18:17:40.03 OBEX Put: telecom/pb/luid/.vcf DataLen=85
18:17:40.03 [TX]: 82 00 92 CB 00 00 00 01 01 00 2D 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 2E 00 76 00 63 00 66 00 00 C3 00 00 00 55 49 00 58 42 45 47 49 4E 3A 56 43 41 52 44 0D 0A 56 45 52 53 49 4F 4E 3A 32 2E 31 0D 0A 4E 3A 48 65 6D 75 3B 42 0D 0A 54 45 4C 3B 43 45 4C 4C 3B 58 2D 53 59 4E 43 4D 4C 52 45 46 37 32 33 33 3A 2B 39 31 39 39 38 37 30 38 38 38 30 31 0D 0A 45 4E 44 3A 56 43 41 52 44
18:17:49.28 Socket closed
18:17:49.28 CheckCOM did not work, force closing Socket
18:17:49.28 Port wurde geschlossen
18:18:00.03 [RX]: 00
18:18:00.03 Lesevorgang fehlerhaft! - Systemerror: 0 [The operation completed successfully.]
18:18:00.03 OBEX Put: telecom/pb/luid/.vcf DataLen=85
18:18:00.03 [TX]: 82 00 92 CB 00 00 00 01 01 00 2D 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 2E 00 76 00 63 00 66 00 00 C3 00 00 00 55 49 00 58 42 45 47 49 4E 3A 56 43 41 52 44 0D 0A 56 45 52 53 49 4F 4E 3A 32 2E 31 0D 0A 4E 3A 41 6A 69 74 3B 42 0D 0A 54 45 4C 3B 43 45 4C 4C 3B 58 2D 53 59 4E 43 4D 4C 52 45 46 37 32 33 31 3A 2B 39 31 39 38 32 31 39 31 31 33 38 32 0D 0A 45 4E 44 3A 56 43 41 52 44
18:18:00.03 Gesendete Bytes: 0 von 146 - Systemerror: 0 [The operation completed successfully.]
18:18:00.03 ErrMsg: Connection to phone not possible!
18:18:31.01 Terminate Subclass
18:18:31.01 Terminate ADO
18:18:31.01 Unload Iconlib
18:18:31.01 Terminate Tray
18:18:31.01 Killing temporary Files
18:18:31.01 Terminate: Calls
18:18:31.01 Terminate: PB
18:18:31.07 SaveDatafile: Phonebook.dat (1358759 Bytes)
18:18:31.13 Terminate: Notes
18:18:31.13 Terminate: Organizer
18:18:31.17 SaveDatafile: Organizer.dat (29907 Bytes)
18:18:31.18 Terminate: SMS
18:18:31.20 ClosePort
18:18:31.20 Port wurde geschlossen
18:18:31.20 Form_QueryUnload -> Ende
18:18:31.20 Unload: frmSplash
18:18:31.20 Unload: fSocket
18:18:31.21 Form_Unload -> Ende

OK, i updated the beta and increased the timout to 90 seconds. please download and test: http://www.fjsoft.at/files/MyPhoneExplo ... Update.exe

If its still not working then
- exit the client on phone
- run MPE in Debugmode (Start-Run-myphoneexplorer debug-OK)
- reproduce the error
- send me the file %appdata%\MyPhoneExplorer\AndroidDebug.txt via email

Cool thanks a ton.

It seems to be working fine now, its taking some time to start syncing and overall sync but its happening.

If at all any problem arises i shall let you know.

Thanks once again.

Kudos to you and your team

perfect. Just a small question: How long needs the sync if there are no changes on both sides ?

Tried with MyPhoneExplorer_DebugUpdate.exe and client 1.0.5 beta2. Client force closes during sync contacts.

MPE in debug mode:
- client auto-launches during initial connection
- long pause during "Synchronizing phonebook, Initiating Sync"
- client force-closes after ~1min, but client icon is still in notification bar, in grey
- after another ~30 secs MPE says "Connection to phone not possible"
- Click OK
- after ~1min MPE reconnects, tries to sync contacts again
- after ~30secs, client force closes again
- MPE sometimes terminates with a "send error report to Microsoft", sometimes without

Will email the AndroidDebug.txt file separately.

FJ hat geschrieben:perfect. Just a small question: How long needs the sync if there are no changes on both sides ?

Around 70-75 Secs when i connect the phn for the first time and around 40-45 secs if i re-sync (without any changes on both sides) after i have already connected the phn and synced it earlier.

Any idea which software to use to save the market and downloaded apps on my SD card. The apps take up a lot of space and phn tends to become slow and for syncing the contacts i think i need to keep a good amount of space free.

Puuhh thats a long time. Do you have many contact-pictuires saved in your phone ?

FJ hat geschrieben:Puuhh thats a long time. Do you have many contact-pictuires saved in your phone ?

As u knw, the HTC Android phns take pics from the Facebook and Gmail account so yes, it has thumbnail sized pics .

OK, in the next updates of the client i plan to make a access-filter so you can sort out f.e. your Facebook account. Maybe i'll add also a option to disable the access to contactpictures (the contactpictures make the most problems).

It works now for you, but 70 seconds are too long for a efficient workflow so in this case it will be probably a good option to disable contactpicture-access.

FJ hat geschrieben:OK, in the next updates of the client i plan to make a access-filter so you can sort out f.e. your Facebook account. Maybe i'll add also a option to disable the access to contactpictures (the contactpictures make the most problems).

It works now for you, but 70 seconds are too long for a efficient workflow so in this case it will be probably a good option to disable contactpicture-access.

Hmm however am satisfied by how things are right now {dont mint the delay that much} anyway how do i go bout doing that (disable contact picture acess) ??

This is in my head for a future update
Nothing you can use already now

FJ hat geschrieben:This is in my head for a future update
Nothing you can use already now

hehehe no issues, will certainly wait for it

Maybe your phone is also useful for some performance-tests, i'll contact you if i have a beta for you.

FJ hat geschrieben:Maybe your phone is also useful for some performance-tests, i'll contact you if i have a beta for you.

Sure, will be glad to assist you in any way possible.

Does MPE disable the contacts linking??? Now i am unable to link the contacts with their facebook account... the contact shows in my Facebook list, but when i try to link it from my contacts the specific contact is not shwn...

Is there a way out ??

MyPhoneExplorer does normally no linking. The only possible scenario would be that you deleted a Facebook contact and created it in MPE, in this case the contact is created in "Phone" and not in "Facebook".

FJ hat geschrieben:MyPhoneExplorer does normally no linking. The only possible scenario would be that you deleted a Facebook contact and created it in MPE, in this case the contact is created in "Phone" and not in "Facebook".

What i did was, multiple contacts with same name were created when i bought and synced the phn with FB [coz 90% of my contacts jus had phn numbers and no email addresses]. When i started using MPE i merged these contacts and saved them as single contacts.

Right now theres jus one contact on my phn and the rest have been modified to my google contacts, i.e. the changes i made thru MPE were effected in my google contacts.

hmm... i wonder where the problem lies :s !!!

Then everything is clear.

Android-Phones do merge similar contacts at runtime. MyPhoneExplorer displays and handles each contact as seperate entry, this has technical reasons.

By merging the contacts you edited one contact, and the other one was deleted. Now you have full Google-Contacts but the Facebook-Entrys are deleted. Maybe the easiest would be to delete and recreate your facebook-account in phone to force a new Facebook-Sync to phone.