Verfasst: So 29. Mär 2009, 23:37
Strange - are you able to test it from a windows-pc ? it seems like an error from the phone and not from Software or Operating system
FJ Software
Supportforum for MyPhoneExplorer
https://fjsoft.at/forum/
HowTo: Use MyPhoneExplorer under GNU/Linux (English Version)
Seite 7 von 13
Verfasst: So 29. Mär 2009, 23:38
Works perfectly on XP.
Verfasst: So 29. Mär 2009, 23:38
OK, post the logfile after the errormessage
Verfasst: So 29. Mär 2009, 23:39
Here it is. Oh, and another thing. If i reboot, it won't even find the phone again and I have to do that bash wizard again.
Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.1
Datum: 1/22/2009
22:36:19.84 Setting Port: 2
22:36:19.85 Setting Baud: 115200
22:36:19.85 Avaiable Ports: COM0=;
22:36:20.17 frmSplash geladen
22:36:21.55 Hauptfenster wird geladen
22:36:22.03 Sidebar fertig geladen
22:36:22.03 Farbschema wurde gelesen
22:36:22.18 UC SMS wird geladen
22:36:22.33 UC Phonebook wird geladen
22:36:22.42 UC Phonebook fertig geladen
22:36:22.42 UC Calls wird geladen
22:36:23.10 UC Organizer wird geladen
22:36:23.57 DoItemUpdate
22:36:23.75 DoItemUpdate fertig
22:36:23.91 Organizer initiated
22:36:23.91 Startpage=1
22:36:23.92 Startpage set
22:36:23.92 UC Filebrowser wird geladen
22:36:23.95 UC Filebrowser: Images werden geladen...
22:36:23.98 UC Filebrowser: Icons Haupttoolbar geladen
22:36:23.99 UC Filebrowser: Icons Detailtoolbar geladen
22:36:24.00 UC Filebrowser: Icons PLaylisttoolbar geladen
22:36:24.00 Lade Ordnericon
22:36:24.01 Lade Laufwerkicon
22:36:24.02 Lade sonstige Icons...
22:36:24.03 Lade Treeviewicons...
22:36:24.05 UC Filebrowser: Icons Listview geladen
22:36:24.05 UC Filebrowser: Sprachdaten werden geladen...
22:36:24.06 Winpreview exists=False
22:36:24.29 UC Filebrowser fertig geladen
22:36:24.32 UC Notes wird geladen
22:36:24.35 UC Calls wird geladen
22:36:24.58 Setting Lastuser:
22:36:24.59 Lade Userdatenbank:
22:36:24.59 GMT Einstellungen geladen
22:36:24.60 InfoSMS geladen
22:36:24.82 Kontakte geladen
22:36:24.82 Organizer geladen
22:36:24.83 Notizen geladen
22:36:24.83 SMS geladen
22:36:24.84 Anrufe geladen
22:36:25.36 Hauptfenster fertig geladen
22:36:27.59 Avaiable Ports: COM0=;
22:36:27.59 Port 2 wird geöffnet...
22:36:27.59 Einstellungen werden gesetzt (115200, N, 8, 1)
22:36:27.60 Puffer werden gesetzt...(8192)
22:36:27.60 Settimeout: RT=2000 WT=200
22:36:28.10 Port 2 wurde geöffnet !
22:36:28.11 [TX]: AT+CGSN
22:36:30.12 ReadFile Fehler: Systemerror: 0 [Success]
22:36:30.13 ErrMsg: Phone could not be identified
22:36:31.54 Port 2 wird geschlossen
22:36:31.55 Port wurde geschlossen
22:36:45.45 Avaiable Ports: COM0=;
22:36:45.45 Port 2 wird geöffnet...
22:36:45.45 Einstellungen werden gesetzt (115200, N, 8, 1)
22:36:45.46 Puffer werden gesetzt...(8192)
22:36:45.46 Settimeout: RT=2000 WT=200
22:36:45.96 Port 2 wurde geöffnet !
22:36:45.97 [TX]: AT+CGSN
22:36:46.06 [RX]: AT+CGSN
22:36:46.06 [RX]: 359302007211003
22:36:46.08 [RX]: OK
22:36:46.08 Settimeout: RT=15000 WT=1000
22:36:46.08 [TX]: ATI
22:36:46.16 [RX]: ATI
22:36:46.16 [RX]: Sony Ericsson W800
22:36:46.17 [RX]: OK
22:36:46.18 [TX]: AT+CSCS="UTF-8"
22:36:46.27 [RX]: AT+CSCS="UTF-8"
22:36:46.27 [RX]: OK
22:36:46.27 [TX]: ATI3
22:36:46.34 [RX]: ATI3
22:36:46.35 [RX]: Sony Ericsson W800 Bluetooth Modem
22:36:46.35 [RX]: OK
22:36:46.37 Alle Verbindungsaktionen beendet
22:36:46.37 [TX]: AT+CSCA?
22:36:46.87 [RX]: AT+CSCA?
22:36:46.88 [RX]: +CSCA: "40744946000",145
22:36:46.88 [RX]: OK
22:36:46.89 DoItemUpdate
22:36:47.08 DoItemUpdate fertig
22:36:53.49 Lade Userdatenbank: Sony Ericsson W800 [359302007211003]
22:36:53.49 GMT Einstellungen geladen
22:36:53.50 InfoSMS geladen
22:36:53.72 Kontakte geladen
22:36:53.79 DoItemUpdate
22:36:53.93 DoItemUpdate fertig
22:36:53.94 Organizer geladen
22:36:53.98 Notizen geladen
22:36:53.98 Load SMS Data...
22:36:54.10 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
22:36:54.10 SMS Data Loaded...
22:36:54.10 SMS geladen
22:36:54.11 Anrufe geladen
22:36:54.13 Suche Memorystick: C:\ Z:\
22:36:54.13 Suche abgeschlossen:
22:36:54.40 [TX]: AT+CBC
22:36:54.48 [RX]: AT+CBC
22:36:54.48 [RX]: +CBC: 0, 66
22:36:54.50 [RX]: OK
22:36:55.05 [TX]: AT+CCLK?
22:36:55.24 [RX]: AT+CCLK?
22:36:55.24 [RX]: +CCLK: "09/01/22,22:36:54+08"
22:36:55.26 [RX]: OK
22:36:55.27 [TX]: AT*EDST?
22:36:55.42 [RX]: AT*EDST?
22:36:55.42 [RX]: *EDST: 0
22:36:55.43 [RX]: OK
22:36:55.44 [TX]: AT+CPROT=0
22:36:55.51 [RX]: AT+CPROT=0
22:36:55.52 [RX]: CONNECT
22:36:55.52 OBEX Connect: 4096 Bytes Paketgröße, Target: IRMC-SYNC
22:36:55.52 [TX]: 80 00 13 10 00 10 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
22:37:10.56 Rückgabe ReadFile: 0 - angefordert wurden: 3 Bytes
22:37:10.56 [RX]: 00 00 00
22:37:10.56 Lesevorgang fehlerhaft! - Systemerror: 0 [Success]
22:37:10.56 OBEX Disconnect
22:37:10.56 [TX]: 81 00 03
22:37:25.60 Rückgabe ReadFile: 0 - angefordert wurden: 3 Bytes
22:37:25.60 [RX]: 00 00 00
22:37:25.60 Lesevorgang fehlerhaft! - Systemerror: 0 [Success]
22:37:25.63 fSync_Timer3: Form.Visible=False
22:37:25.63 ErrMsg: Obex Protocol could not be initialized!
OBEX Errorcode: 00 - Phone didn't answer
22:37:29.45 [TX]: AT+CPROT=0
22:37:44.47 ReadFile Fehler: Systemerror: 0 [Success]
22:37:44.47 ErrMsg: Obex Protocol could not be initialized!
OBEX Error:
22:37:46.88 [TX]: AT+CPROT=0
22:38:01.90 ReadFile Fehler: Systemerror: 0 [Success]
22:38:01.92 ErrMsg: Obex Protocol could not be initialized!
OBEX Error:
22:38:05.78 [TX]: AT+CSCA?
22:38:20.79 ReadFile Fehler: Systemerror: 0 [Success]
22:38:20.84 [TX]: AT+CPBS="SM"
22:38:35.85 ReadFile Fehler: Systemerror: 0 [Success]
22:38:35.87 ErrMsg: The phonebook on the SIM card could not be downloaded!
22:38:39.55 [TX]: AT+CPBS="DC"
22:38:54.57 ReadFile Fehler: Systemerror: 0 [Success]
22:38:54.63 Settimeout: RT=30000 WT=1000
22:38:54.63 [TX]: AT+CPMS="SM","SM"
22:39:24.65 ReadFile Fehler: Systemerror: 0 [Success]
Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.1
Datum: 1/22/2009
22:36:19.84 Setting Port: 2
22:36:19.85 Setting Baud: 115200
22:36:19.85 Avaiable Ports: COM0=;
22:36:20.17 frmSplash geladen
22:36:21.55 Hauptfenster wird geladen
22:36:22.03 Sidebar fertig geladen
22:36:22.03 Farbschema wurde gelesen
22:36:22.18 UC SMS wird geladen
22:36:22.33 UC Phonebook wird geladen
22:36:22.42 UC Phonebook fertig geladen
22:36:22.42 UC Calls wird geladen
22:36:23.10 UC Organizer wird geladen
22:36:23.57 DoItemUpdate
22:36:23.75 DoItemUpdate fertig
22:36:23.91 Organizer initiated
22:36:23.91 Startpage=1
22:36:23.92 Startpage set
22:36:23.92 UC Filebrowser wird geladen
22:36:23.95 UC Filebrowser: Images werden geladen...
22:36:23.98 UC Filebrowser: Icons Haupttoolbar geladen
22:36:23.99 UC Filebrowser: Icons Detailtoolbar geladen
22:36:24.00 UC Filebrowser: Icons PLaylisttoolbar geladen
22:36:24.00 Lade Ordnericon
22:36:24.01 Lade Laufwerkicon
22:36:24.02 Lade sonstige Icons...
22:36:24.03 Lade Treeviewicons...
22:36:24.05 UC Filebrowser: Icons Listview geladen
22:36:24.05 UC Filebrowser: Sprachdaten werden geladen...
22:36:24.06 Winpreview exists=False
22:36:24.29 UC Filebrowser fertig geladen
22:36:24.32 UC Notes wird geladen
22:36:24.35 UC Calls wird geladen
22:36:24.58 Setting Lastuser:
22:36:24.59 Lade Userdatenbank:
22:36:24.59 GMT Einstellungen geladen
22:36:24.60 InfoSMS geladen
22:36:24.82 Kontakte geladen
22:36:24.82 Organizer geladen
22:36:24.83 Notizen geladen
22:36:24.83 SMS geladen
22:36:24.84 Anrufe geladen
22:36:25.36 Hauptfenster fertig geladen
22:36:27.59 Avaiable Ports: COM0=;
22:36:27.59 Port 2 wird geöffnet...
22:36:27.59 Einstellungen werden gesetzt (115200, N, 8, 1)
22:36:27.60 Puffer werden gesetzt...(8192)
22:36:27.60 Settimeout: RT=2000 WT=200
22:36:28.10 Port 2 wurde geöffnet !
22:36:28.11 [TX]: AT+CGSN
22:36:30.12 ReadFile Fehler: Systemerror: 0 [Success]
22:36:30.13 ErrMsg: Phone could not be identified
22:36:31.54 Port 2 wird geschlossen
22:36:31.55 Port wurde geschlossen
22:36:45.45 Avaiable Ports: COM0=;
22:36:45.45 Port 2 wird geöffnet...
22:36:45.45 Einstellungen werden gesetzt (115200, N, 8, 1)
22:36:45.46 Puffer werden gesetzt...(8192)
22:36:45.46 Settimeout: RT=2000 WT=200
22:36:45.96 Port 2 wurde geöffnet !
22:36:45.97 [TX]: AT+CGSN
22:36:46.06 [RX]: AT+CGSN
22:36:46.06 [RX]: 359302007211003
22:36:46.08 [RX]: OK
22:36:46.08 Settimeout: RT=15000 WT=1000
22:36:46.08 [TX]: ATI
22:36:46.16 [RX]: ATI
22:36:46.16 [RX]: Sony Ericsson W800
22:36:46.17 [RX]: OK
22:36:46.18 [TX]: AT+CSCS="UTF-8"
22:36:46.27 [RX]: AT+CSCS="UTF-8"
22:36:46.27 [RX]: OK
22:36:46.27 [TX]: ATI3
22:36:46.34 [RX]: ATI3
22:36:46.35 [RX]: Sony Ericsson W800 Bluetooth Modem
22:36:46.35 [RX]: OK
22:36:46.37 Alle Verbindungsaktionen beendet
22:36:46.37 [TX]: AT+CSCA?
22:36:46.87 [RX]: AT+CSCA?
22:36:46.88 [RX]: +CSCA: "40744946000",145
22:36:46.88 [RX]: OK
22:36:46.89 DoItemUpdate
22:36:47.08 DoItemUpdate fertig
22:36:53.49 Lade Userdatenbank: Sony Ericsson W800 [359302007211003]
22:36:53.49 GMT Einstellungen geladen
22:36:53.50 InfoSMS geladen
22:36:53.72 Kontakte geladen
22:36:53.79 DoItemUpdate
22:36:53.93 DoItemUpdate fertig
22:36:53.94 Organizer geladen
22:36:53.98 Notizen geladen
22:36:53.98 Load SMS Data...
22:36:54.10 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
22:36:54.10 SMS Data Loaded...
22:36:54.10 SMS geladen
22:36:54.11 Anrufe geladen
22:36:54.13 Suche Memorystick: C:\ Z:\
22:36:54.13 Suche abgeschlossen:
22:36:54.40 [TX]: AT+CBC
22:36:54.48 [RX]: AT+CBC
22:36:54.48 [RX]: +CBC: 0, 66
22:36:54.50 [RX]: OK
22:36:55.05 [TX]: AT+CCLK?
22:36:55.24 [RX]: AT+CCLK?
22:36:55.24 [RX]: +CCLK: "09/01/22,22:36:54+08"
22:36:55.26 [RX]: OK
22:36:55.27 [TX]: AT*EDST?
22:36:55.42 [RX]: AT*EDST?
22:36:55.42 [RX]: *EDST: 0
22:36:55.43 [RX]: OK
22:36:55.44 [TX]: AT+CPROT=0
22:36:55.51 [RX]: AT+CPROT=0
22:36:55.52 [RX]: CONNECT
22:36:55.52 OBEX Connect: 4096 Bytes Paketgröße, Target: IRMC-SYNC
22:36:55.52 [TX]: 80 00 13 10 00 10 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
22:37:10.56 Rückgabe ReadFile: 0 - angefordert wurden: 3 Bytes
22:37:10.56 [RX]: 00 00 00
22:37:10.56 Lesevorgang fehlerhaft! - Systemerror: 0 [Success]
22:37:10.56 OBEX Disconnect
22:37:10.56 [TX]: 81 00 03
22:37:25.60 Rückgabe ReadFile: 0 - angefordert wurden: 3 Bytes
22:37:25.60 [RX]: 00 00 00
22:37:25.60 Lesevorgang fehlerhaft! - Systemerror: 0 [Success]
22:37:25.63 fSync_Timer3: Form.Visible=False
22:37:25.63 ErrMsg: Obex Protocol could not be initialized!
OBEX Errorcode: 00 - Phone didn't answer
22:37:29.45 [TX]: AT+CPROT=0
22:37:44.47 ReadFile Fehler: Systemerror: 0 [Success]
22:37:44.47 ErrMsg: Obex Protocol could not be initialized!
OBEX Error:
22:37:46.88 [TX]: AT+CPROT=0
22:38:01.90 ReadFile Fehler: Systemerror: 0 [Success]
22:38:01.92 ErrMsg: Obex Protocol could not be initialized!
OBEX Error:
22:38:05.78 [TX]: AT+CSCA?
22:38:20.79 ReadFile Fehler: Systemerror: 0 [Success]
22:38:20.84 [TX]: AT+CPBS="SM"
22:38:35.85 ReadFile Fehler: Systemerror: 0 [Success]
22:38:35.87 ErrMsg: The phonebook on the SIM card could not be downloaded!
22:38:39.55 [TX]: AT+CPBS="DC"
22:38:54.57 ReadFile Fehler: Systemerror: 0 [Success]
22:38:54.63 Settimeout: RT=30000 WT=1000
22:38:54.63 [TX]: AT+CPMS="SM","SM"
22:39:24.65 ReadFile Fehler: Systemerror: 0 [Success]
Verfasst: So 29. Mär 2009, 23:40
OK, the error comes not from the phone 
The whole communication breaks down. Maybe other Wine-Users in the forum are able to help you
The whole communication breaks down. Maybe other Wine-Users in the forum are able to help you
Verfasst: So 29. Mär 2009, 23:40
Strange - first it works and then everything fails. What did you do when it stopped working?
Verfasst: So 29. Mär 2009, 23:41
I get this message when I try to run MPE
/root/myPhoneExplorer.bash: line 6: Dp: command not found
MPE starts up, but the phone can not be identifyed
Ubuntu 8.10 fully updatet
MPE 1.7.1
Use USB, do not have BlueTooth on this computer
Tried different phones, same result
/root/myPhoneExplorer.bash: line 6: Dp: command not found
MPE starts up, but the phone can not be identifyed
Ubuntu 8.10 fully updatet
MPE 1.7.1
Use USB, do not have BlueTooth on this computer
Tried different phones, same result
Verfasst: So 29. Mär 2009, 23:42
When I try to start MPE it just shuts down immideately after it's fully loaded
After install I was able to connect to the phone, but after shut-down (normal) it will not start again.
Thought I would try to uninstall, but get the message that MPE is running and can't be uninstalled. This message is after a reboot without the phone connected.
Have Ubuntu 8.10 fully updated
MPE 1.7.1
Wine 1.0.1
VBR-6 also installed
This is very strange. Help would be appriciated
After install I was able to connect to the phone, but after shut-down (normal) it will not start again.
Thought I would try to uninstall, but get the message that MPE is running and can't be uninstalled. This message is after a reboot without the phone connected.
Have Ubuntu 8.10 fully updated
MPE 1.7.1
Wine 1.0.1
VBR-6 also installed
This is very strange. Help would be appriciated
Verfasst: So 29. Mär 2009, 23:43
He dude, you shouldn't use root account but your user account instead.Gremling hat geschrieben:I get this message when I try to run MPE
/root/myPhoneExplorer.bash: line 6: Dp: command not found
MPE starts up, but the phone can not be identifyed
Ubuntu 8.10 fully updatet
MPE 1.7.1
Use USB, do not have BlueTooth on this computer
Tried different phones, same result
Verfasst: So 29. Mär 2009, 23:46
Hi guys, girls.
at the moment, the script works close to well for my GNU/Linux Debian Lenny with the last script : http://sputnick-area.net/ftp/downloads/ ... -beta.bash
There is a bug resolved : the sed error when choosing the phone in bluetooth mode.
I still have a (only one) problem with my SMS, when I try to get thoses, MPE crash live & direct.
I post the Debug.txt, maybe some guys here can understand the MPE side that is not working.
at the moment, the script works close to well for my GNU/Linux Debian Lenny with the last script : http://sputnick-area.net/ftp/downloads/ ... -beta.bash
There is a bug resolved : the sed error when choosing the phone in bluetooth mode.
I still have a (only one) problem with my SMS, when I try to get thoses, MPE crash live & direct.
I post the Debug.txt, maybe some guys here can understand the MPE side that is not working.
Maybe a charset problem ? Don't know...(...)
01:28:27.70 [RX]: OK
01:28:27.71 DataLen=12607 Response=OK False
01:28:27.71 SMS Daten empfangen...
01:28:27.71 Import SMS, 142 Zeilen...
01:28:28.26 SMS dekodiert, MultiSMS werden berechnet...
01:28:28.26 MultiSMS (Inbox) berechnet
01:28:28.27 MultiSMS (Drafts) berechnet
01:28:28.27 MultiSMS (Sent) berechnet
01:28:28.27 CheckTmpStore
01:28:28.27 Importieren der SMS hat funktioniert...
01:28:28.28 Settimeout: RT=15000 WT=1000
01:28:28.28 [TX]: AT+CPMS="SM","SM"
01:28:28.35 [RX]: AT+CPMS="SM","SM"
01:28:28.36 [RX]: +CPMS: 0,50,0,50,71,198
01:28:28.36 [RX]: OK
01:28:28.37 [TX]: AT+CMGL=4
01:28:28.40 [RX]: AT+CMGL=4
01:28:28.40 [RX]: OK
01:28:28.41 CheckTmpStore
01:28:28.42 SMS-Datenbank gespeichert. Dauer:5 SMS:70
Verfasst: So 29. Mär 2009, 23:47
Same result with user account on a new computer and a new installsputnick hat geschrieben:He dude, you shouldn't use root account but your user account instead.Gremling hat geschrieben:I get this message when I try to run MPE
/root/myPhoneExplorer.bash: line 6: Dp: command not found
MPE starts up, but the phone can not be identifyed
Ubuntu 8.10 fully updatet
MPE 1.7.1
Use USB, do not have BlueTooth on this computer
Tried different phones, same result
Verfasst: So 29. Mär 2009, 23:50
Did you try one of the older scripts? such as Version 3.4?
Verfasst: So 29. Mär 2009, 23:50
The problem now is that I can not install MPE because "its currently running" The program is not running! I can't uninstall it either "because its running"
I'm going insane!!!!
This is the last thing before the dualboot with XP will be removed and the Ubuntu will "stand alone"
I'm going insane!!!!
This is the last thing before the dualboot with XP will be removed and the Ubuntu will "stand alone"
Verfasst: So 29. Mär 2009, 23:52
The version of MPE have changed, the script need to be rewrited.
Gremling : try :
Gremling : try :
Code: Alles auswählen
kill -9 $(ps aux|grep -i MyPhoneExplore[r]|awk '{print $2}')Verfasst: Fr 17. Apr 2009, 01:16
Woah! 
There's a Linux version of MyPhoneExplorer?! 
I'm SO glad to know that!!! It was the only reason why I still had my Windows partition >.> It was a pain to always have to boot to Windows to dump my text messages on the computer. 
There's a Linux version of MyPhoneExplorer?! I'm SO glad to know that!!! It was the only reason why I still had my Windows partition >.> It was a pain to always have to boot to Windows to dump my text messages on the computer. Verfasst: Fr 17. Apr 2009, 10:32
There is no Linux version but MPE works with WINE.
Verfasst: Fr 24. Apr 2009, 19:13
Ok guys, sorry to don't maintain my script myphoneinstaller-4.x but it's really a pain in the *** to have a reliable state.
That works, but when I try to open a SMS that crash like I report before.
I give up for the moment, but there's a workaround :
I have virtualbox on my GNU/Linux/Archlinux and USB enable with my BlueeTooth dongle, I have XP PRO as guest system and everything woorks fine.
If you want to follow me, add this in /etc/fstab :
And add a filter matching your BT device in the virtualbox config.
That's the most reliable way I've found since I try MPE to work.
Cheers, sputnick
That works, but when I try to open a SMS that crash like I report before.
I give up for the moment, but there's a workaround :
I have virtualbox on my GNU/Linux/Archlinux and USB enable with my BlueeTooth dongle, I have XP PRO as guest system and everything woorks fine.
If you want to follow me, add this in /etc/fstab :
Code: Alles auswählen
none /proc/bus/usb usbfs auto,busgid=108,busmode=0775,devgid=108,devmode=0664 0 0That's the most reliable way I've found since I try MPE to work.
Cheers, sputnick
Verfasst: Mo 27. Apr 2009, 21:10
It works on Ubuntu 9.04 The only thing that I miss from the Windows version is that the texts aren't obtained automatically from the phone, so when I get a text message, it doesn't automatically open up a new window in MPE. 
But other than that, it's good. 
At least now I can be on Linux without any more issues
The only thing that I miss from the Windows version is that the texts aren't obtained automatically from the phone, so when I get a text message, it doesn't automatically open up a new window in MPE. But other than that, it's good. At least now I can be on Linux without any more issues Verfasst: Mo 27. Apr 2009, 21:46
Bruno De Barros,
that will be interesting for everybody if you give a bit more details.
- Did you use a script ? If yes, which one ? Did you modify something ?
- Do you use bluetooth or USB ?
- Wich version of wine ?
- Which phone ?
- Which locales ? ( what return "locale" command ? )
Thanks by advance...
that will be interesting for everybody if you give a bit more details.
- Did you use a script ? If yes, which one ? Did you modify something ?
- Do you use bluetooth or USB ?
- Wich version of wine ?
- Which phone ?
- Which locales ? ( what return "locale" command ? )
Thanks by advance...
Verfasst: Fr 1. Mai 2009, 18:12
Gremling_restored hat geschrieben:The problem now is that I can not install MPE because "its currently running" The program is not running! I can't uninstall it either "because its running"
I'm going insane!!!!
This is the last thing before the dualboot with XP will be removed and the Ubuntu will "stand alone"
Same problem here. Solved it by removing every MyPhoneExplorer-Entry from the wine registry.
How to do that?!
In the directory "/home/$user/.wine" there are three files: system.reg, user.reg, userdef.reg.
First make a backup, then open with your favourite text editor and search for "phone". Remove every entry that relates to MyPhoneExplorer. There are quite a few of them, but once you managed to delete them, installation will succeed.