Autor |
Nachricht |
JustinD
Anmeldedatum: 08.01.2007
Beiträge: 9
|
Verfasst am:
Mo Jan 08, 2007 01:45 |
|
Model of your phone K800i
Type of connection USB-
MPE version MPE 1.5.7
Windows version WinXP-SP2
firmware version ?
I am just trying to sync my contacts and having problems. I can download the contact info to my PC but everytime I update info on within MyPhoneExplorer and sync it just takes the info from the phone and overwrites the PC updated info. Also, I get OBEX errors if I try and resync again post this.
How do I make the sync two-way? What settings could I have incorrect?
Danke
Justin |
|
|
|
|
JustinD
Anmeldedatum: 08.01.2007
Beiträge: 9
|
Verfasst am:
Mo Jan 08, 2007 03:51 |
|
Logdatei MyPhoneExplorer
************************
Programmversion: 1.5.7
Datum: 8/01/2007
11:55:48.50 Setting Port: 3
11:55:48.50 Setting Baud: 115200
11:55:48.50 Avaiable Ports: COM1=\Device\Serial0; COM2=\Device\Serial1; COM3=\Device\SE27mdm0; COM4=\Device\SE27mdm1; COM5=\Device\SE27obex0; COM6=\Device\SE27mgmt0;
11:55:48.72 frmSplash geladen
11:55:50.08 Hauptfenster wird geladen
11:55:50.34 Sidebar fertig geladen
11:55:50.39 Farbschema wurde gelesen
11:55:50.59 UC SMS wird geladen
11:55:50.64 UC Phonebook wird geladen
11:55:50.69 UC Phonebook fertig geladen
11:55:50.69 UC Calls wird geladen
11:55:50.78 UC Organizer wird geladen
11:55:50.90 DoItemUpdate
11:55:50.94 DoItemUpdate fertig
11:55:51.08 UC Notes wird geladen
11:55:51.09 UC Calls wird geladen
11:55:51.50 Setting Lastuser: Sony Ericsson K800 [353996012947737]
11:55:51.50 Lade Userdatenbank: Sony Ericsson K800 [353996012947737]
11:55:51.50 GMT Einstellungen geladen
11:55:51.50 InfoSMS geladen
11:55:51.50 Notizeintrag gesetzt
11:55:51.61 Kontakte geladen
11:55:51.62 DoItemUpdate
11:55:51.67 DoItemUpdate fertig
11:55:51.67 Organizer geladen
11:55:51.69 Notizen geladen
11:55:51.69 SMS geladen
11:55:51.69 Anrufe geladen
11:55:51.78 Hauptfenster fertig geladen
11:55:56.45 Port 3 wird geöffnet...
11:55:56.47 Einstellungen werden gesetzt (115200, N, 8, 1)
11:55:56.48 Puffer werden gesetzt...(8192)
11:55:56.48 Settimeout: RT=2000 WT=200
11:55:56.98 Port 3 wurde geöffnet !
11:55:56.98 [TX]: AT+CGSN
11:55:57.12 [RX]: AT+CGSN
11:55:57.12 [RX]: 353996012947737
11:55:57.12 [RX]: OK
11:55:57.14 Settimeout: RT=10000 WT=1000
11:55:57.14 [TX]: AT+CGMI
11:55:57.31 [RX]: AT+CGMI
11:55:57.31 [RX]: Sony Ericsson
11:55:57.33 [RX]: OK
11:55:57.33 [TX]: ATI
11:55:57.33 [RX]: ATI
11:55:57.33 [RX]: Sony Ericsson K800
11:55:57.34 [RX]: OK
11:55:57.34 [TX]: AT+CSCS="UTF-8"
11:55:57.69 [RX]: AT+CSCS="UTF-8"
11:55:57.70 [RX]: OK
11:55:57.70 Alle Verbindungsaktionen beendet
11:55:57.70 Suche Memorystick: A:\ C:\ D:\ E:\ F:\ G:\ I:\ L:\ S:\ U:\ Z:\
11:55:57.70 Suche abgeschlossen:
11:55:57.90 [TX]: AT*EOBEX
11:55:58.19 [RX]: AT*EOBEX
11:55:58.19 [RX]: ERROR
11:55:58.19 [TX]: AT+CPROT=0
11:55:58.23 [RX]: AT+CPROT=0
11:55:58.23 [RX]: CONNECT
11:55:58.25 OBEX Connect: 1024 Bytes Paketgröße, Target:
11:55:58.25 [TX]: 80 00 13 10 00 04 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
11:55:58.45 [RX]: A0 00 18 10 00 10 00 4A 00 0C 49 52 4D 43 2D 53 59 4E 43 CB 00 00 00 01
11:55:58.45 Connection ID:1
11:55:58.45 Paketgröße: 1024, maximal möglich:4096
11:55:58.45 Ermittle und verarbeite info.log
11:55:58.45 OBEX Get: telecom/pb/info.log
11:55:58.45 [TX]: 83 00 2E 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
11:55:58.69 [RX]: .....
11:55:58.69 ObexGet Fertig, Returncode=A0
11:55:58.69 Info.log:
Total-Records:40
Maximum-Records:1000
Free-Records:960
DID:386D438A
IEL:0x08
HD:YES
SAT:CC
MCL:NO
ICL:NO
OCL:NO
X-IRMC-FIELDS:
<Begin>
VERSION:
N;CHARSET=ISO-8859-1;CHARSET=UTF-8[1=15;2=15]:=30
EMAIL;TYPE=INTERNET:=50
TITLE;CHARSET=ISO-8859-1;CHARSET=UTF-8:=15
ORG;CHARSET=ISO-8859-1;CHARSET=UTF-8:=15
X-TEL-TYPES:6
TEL;TYPE=WORK:=40
TEL;TYPE=HOME:=40
TEL;TYPE=CELL:=40
TEL;TYPE=FAX:=40
TEL;TYPE=PAGER:=40
TEL:=40
URL:=50
X-IRMC-LUID:=12
REV:
<End>
11:55:58.69 OBEX Get: telecom/pb/luid/cc.Log
11:55:58.69 [TX]: 83 00 34 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 63 00 63 00 2E 00 4C 00 6F 00 67 00 00
11:55:58.75 [RX]: A0 00 0A 49 00 07 36 36 0D 0A
11:55:58.75 ObexGet Fertig, Returncode=A0
11:55:58.75 OBEX Disconnect
11:55:58.75 [TX]: 81 00 03
11:55:58.75 [RX]: A0 00 03
11:55:58.75 Disconnect hat funktioniert
11:55:58.75 Lese noch den OK-String
11:55:58.76 [RX]: OK
11:55:58.76 [TX]: AT+CSCA?
11:55:58.84 [RX]: AT+CSCA?
11:55:58.84 [RX]: +CSCA: "+61430004010",145
11:55:58.84 [RX]: OK
11:55:58.86 [TX]: AT+CPROT=0
11:55:58.87 [RX]: AT+CPROT=0
11:55:58.87 [RX]: CONNECT
11:55:58.87 OBEX Connect: 1024 Bytes Paketgröße, Target:
11:55:58.87 [TX]: 80 00 13 10 00 04 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
11:55:59.00 [RX]: A0 00 18 10 00 10 00 4A 00 0C 49 52 4D 43 2D 53 59 4E 43 CB 00 00 00 02
11:55:59.00 Connection ID:2
11:55:59.00 Paketgröße: 1024, maximal möglich:4096
11:55:59.00 Ermittle und verarbeite info.log
11:55:59.00 OBEX Get: telecom/pb/info.log
11:55:59.00 [TX]: 83 00 2E 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
11:55:59.19 [RX]: ....
11:55:59.19 ObexGet Fertig, Returncode=A0
11:55:59.19 Info.log:
Total-Records:40
Maximum-Records:1000
Free-Records:960
DID:386D438A
IEL:0x08
HD:YES
SAT:CC
MCL:NO
ICL:NO
OCL:NO
X-IRMC-FIELDS:
<Begin>
VERSION:
N;CHARSET=ISO-8859-1;CHARSET=UTF-8[1=15;2=15]:=30
EMAIL;TYPE=INTERNET:=50
TITLE;CHARSET=ISO-8859-1;CHARSET=UTF-8:=15
ORG;CHARSET=ISO-8859-1;CHARSET=UTF-8:=15
X-TEL-TYPES:6
TEL;TYPE=WORK:=40
TEL;TYPE=HOME:=40
TEL;TYPE=CELL:=40
TEL;TYPE=FAX:=40
TEL;TYPE=PAGER:=40
TEL:=40
URL:=50
X-IRMC-LUID:=12
REV:
<End>
11:55:59.19 OBEX Get: telecom/pb.vcf
11:55:59.19 [TX]: 83 00 24 01 00 21 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2E 00 76 00 63 00 66 00 00
11:55:59.28 Rückgabe ReadFile: 509 - angefordert wurden: 1022 Bytes
11:55:59.28 [RX]: .....
11:55:59.28 Warte 200 ms...
11:55:59.48 [TX]: 83 00 03
11:55:59.51 Rückgabe ReadFile: 509 - angefordert wurden: 1022 Bytes
11:55:59.51 [RX]: ....
11:55:59.53 Warte 200 ms...
11:55:59.73 [TX]: 83 00 03
11:55:59.76 Rückgabe ReadFile: 509 - angefordert wurden: 1022 Bytes
11:55:59.78 [RX]: ....
11:55:59.78 Warte 200 ms...
11:55:59.98 [TX]: 83 00 03
11:56:00.09 Rückgabe ReadFile: 509 - angefordert wurden: 1022 Bytes
11:56:00.09 [RX]: ...
11:56:00.09 Warte 200 ms...
11:56:00.29 [TX]: 83 00 03
11:56:00.48 Rückgabe ReadFile: 509 - angefordert wurden: 1022 Bytes
11:56:00.48 [RX]: ....
11:56:00.48 Warte 200 ms...
11:56:00.69 [TX]: 83 00 03
11:56:10.69 Rückgabe ReadFile: 0 - angefordert wurden: 3 Bytes
11:56:10.69 [RX]: 00 00 00
11:56:10.69 Lesevorgang fehlerhaft ! - Systemerror: 0 [The operation completed successfully.]
11:56:10.69 ObexGet Fertig, Returncode=0
11:56:10.69 OBEX Errorcode: 00 - Phone didn't answer
11:56:10.72 OBEX Get: telecom/pb/luid/cc.Log
11:56:10.72 [TX]: 83 00 34 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 63 00 63 00 2E 00 4C 00 6F 00 67 00 00
11:56:20.72 Rückgabe ReadFile: 0 - angefordert wurden: 3 Bytes
11:56:20.72 [RX]: 00 00 00
11:56:20.72 Lesevorgang fehlerhaft ! - Systemerror: 0 [The operation completed successfully.]
11:56:20.72 ObexGet Fertig, Returncode=0
11:56:20.72 OBEX Errorcode: 00 - Phone didn't answer
11:56:20.73 OBEX Disconnect
11:56:20.73 [TX]: 81 00 03
11:56:30.73 Rückgabe ReadFile: 0 - angefordert wurden: 3 Bytes
11:56:30.73 [RX]: 00 00 00
11:56:30.73 Lesevorgang fehlerhaft ! - Systemerror: 0 [The operation completed successfully.]
11:57:03.44 Port 3 wird geschlossen
11:57:03.47 Port 3 wird geöffnet...
11:57:03.48 Einstellungen werden gesetzt (9600, N, 8, 1)
11:57:03.48 Puffer werden gesetzt...(8192)
11:57:03.48 Settimeout: RT=2000 WT=200
11:57:03.98 Port 3 wurde geöffnet !
11:57:03.98 Settimeout: RT=2000 WT=500
11:57:03.98 [TX]: AT+CBC
11:57:04.00 [RX]: AT+CBC
11:57:04.00 [RX]: +CBC: 1, 88
11:57:04.00 [RX]: OK
11:57:04.00 Settimeout: RT=10000 WT=1000
11:57:04.01 [TX]: ATI
11:57:04.01 [RX]: ATI
11:57:04.01 [RX]: Sony Ericsson K800
11:57:04.01 [RX]: OK
11:57:04.03 [TX]: AT+CPROT=0
11:57:04.03 [RX]: AT+CPROT=0
11:57:04.03 [RX]: NO CARRIER
11:57:04.03 Port 3 wird geschlossen
11:57:04.06 Port 3 wird geöffnet...
11:57:04.08 Einstellungen werden gesetzt (19200, N, 8, 1)
11:57:04.09 Puffer werden gesetzt...(8192)
11:57:04.09 Settimeout: RT=2000 WT=200
11:57:04.59 Port 3 wurde geöffnet !
11:57:04.59 Settimeout: RT=2000 WT=100
11:57:04.59 [TX]: AT+CBC
11:57:04.61 [RX]: AT+CBC
11:57:04.61 [RX]: +CBC: 1, 88
11:57:04.61 [RX]: OK
11:57:04.62 Port 3 wird geschlossen
11:57:04.64 Port 3 wird geöffnet...
11:57:04.66 Einstellungen werden gesetzt (115200, N, 8, 1)
11:57:04.67 Puffer werden gesetzt...(8192)
11:57:04.67 Settimeout: RT=2000 WT=200
11:57:05.17 Port 3 wurde geöffnet !
11:57:05.17 Settimeout: RT=2000 WT=100
11:57:05.17 [TX]: AT+CBC
11:57:05.17 [RX]: AT+CBC
11:57:05.17 [RX]: +CBC: 1, 88
11:57:05.19 [RX]: OK
11:57:05.19 Port 3 wird geschlossen
11:57:05.20 Port 3 wird geöffnet...
11:57:05.22 Einstellungen werden gesetzt (256000, N, 8, 1)
11:57:05.23 Puffer werden gesetzt...(8192)
11:57:05.23 Settimeout: RT=2000 WT=200
11:57:05.73 Port 3 wurde geöffnet !
11:57:05.73 Settimeout: RT=2000 WT=100
11:57:05.73 [TX]: AT+CBC
11:57:06.08 [RX]: AT+CBC
11:57:06.08 [RX]: +CBC: 1, 88
11:57:06.08 [RX]: OK
11:57:06.08 Port 3 wird geschlossen
11:57:06.09 Port 3 wird geöffnet...
11:57:06.11 Einstellungen werden gesetzt (460800, N, 8, 1)
11:57:06.12 Puffer werden gesetzt...(8192)
11:57:06.12 Settimeout: RT=2000 WT=200
11:57:06.62 Port 3 wurde geöffnet !
11:57:06.62 Settimeout: RT=2000 WT=100
11:57:06.62 [TX]: AT+CBC
11:57:06.62 [RX]: AT+CBC
11:57:06.62 [RX]: +CBC: 1, 88
11:57:06.62 [RX]: OK
11:57:06.64 Port 3 wird geschlossen
11:57:06.66 Port 3 wird geöffnet...
11:57:06.67 Einstellungen werden gesetzt (921600, N, 8, 1)
11:57:06.69 Puffer werden gesetzt...(8192)
11:57:06.69 Settimeout: RT=2000 WT=200
11:57:07.19 Port 3 wurde geöffnet !
11:57:07.19 Settimeout: RT=2000 WT=100
11:57:07.19 [TX]: AT+CBC
11:57:07.19 [RX]: AT+CBC
11:57:07.19 [RX]: +CBC: 1, 88
11:57:07.20 [RX]: OK
11:57:07.20 Port 3 wird geschlossen
11:57:27.31 DoItemUpdate
11:57:27.34 DoItemUpdate fertig
11:58:55.63 DoItemUpdate
11:58:55.64 DoItemUpdate fertig
11:58:57.48 Port 4 wird geöffnet...
11:58:57.50 Einstellungen werden gesetzt (115200, N, 8, 1)
11:58:57.52 Puffer werden gesetzt...(8192)
11:58:57.52 Settimeout: RT=2000 WT=200
11:58:58.02 Port 4 wurde geöffnet !
11:58:58.02 [TX]: AT+CGSN
11:58:58.02 Systemerror: 0 [The operation completed successfully.]
11:58:59.78 Port 4 wird geschlossen
11:59:17.83 Port 3 wird geöffnet...
11:59:17.84 Einstellungen werden gesetzt (9600, N, 8, 1)
11:59:17.86 Puffer werden gesetzt...(8192)
11:59:17.86 Settimeout: RT=2000 WT=200
11:59:18.36 Port 3 wurde geöffnet !
11:59:18.36 Settimeout: RT=2000 WT=500
11:59:18.36 [TX]: AT+CBC
11:59:18.36 [RX]: AT+CBC
11:59:18.36 [RX]: +CBC: 1, 90
11:59:18.38 [RX]: OK
11:59:18.38 Settimeout: RT=10000 WT=1000
11:59:18.38 [TX]: ATI
11:59:18.38 [RX]: ATI
11:59:18.39 [RX]: Sony Ericsson K800
11:59:18.39 [RX]: OK
11:59:18.39 [TX]: AT*EOBEX
11:59:18.41 [RX]: AT*EOBEX
11:59:18.41 [RX]: ERROR
11:59:18.41 [TX]: AT+CPROT=0
11:59:18.42 [RX]: AT+CPROT=0
11:59:18.42 [RX]: NO CARRIER
11:59:18.42 Port 3 wird geschlossen
11:59:18.45 Port 3 wird geöffnet...
11:59:18.47 Einstellungen werden gesetzt (19200, N, 8, 1)
11:59:18.49 Puffer werden gesetzt...(8192)
11:59:18.49 Settimeout: RT=2000 WT=200
11:59:18.99 Port 3 wurde geöffnet !
11:59:18.99 Settimeout: RT=2000 WT=100
11:59:18.99 [TX]: AT+CBC
11:59:18.99 [RX]: AT+CBC
11:59:18.99 [RX]: +CBC: 1, 90
11:59:19.00 [RX]: OK
11:59:19.00 Port 3 wird geschlossen
11:59:19.02 Port 3 wird geöffnet...
11:59:19.03 Einstellungen werden gesetzt (115200, N, 8, 1)
11:59:19.05 Puffer werden gesetzt...(8192)
11:59:19.05 Settimeout: RT=2000 WT=200
11:59:19.55 Port 3 wurde geöffnet !
11:59:19.55 Settimeout: RT=2000 WT=100
11:59:19.55 [TX]: AT+CBC
11:59:19.55 [RX]: AT+CBC
11:59:19.55 [RX]: +CBC: 1, 90
11:59:19.56 [RX]: OK
11:59:19.56 Port 3 wird geschlossen
11:59:19.58 Port 3 wird geöffnet...
11:59:19.59 Einstellungen werden gesetzt (256000, N, 8, 1)
11:59:19.61 Puffer werden gesetzt...(8192)
11:59:19.61 Settimeout: RT=2000 WT=200
11:59:20.11 Port 3 wurde geöffnet !
11:59:20.11 Settimeout: RT=2000 WT=100
11:59:20.11 [TX]: AT+CBC
11:59:20.11 [RX]: AT+CBC
11:59:20.11 [RX]: +CBC: 1, 90
11:59:20.13 [RX]: OK
11:59:20.13 Port 3 wird geschlossen
11:59:20.14 Port 3 wird geöffnet...
11:59:20.16 Einstellungen werden gesetzt (460800, N, 8, 1)
11:59:20.17 Puffer werden gesetzt...(8192)
11:59:20.17 Settimeout: RT=2000 WT=200
11:59:20.67 Port 3 wurde geöffnet !
11:59:20.67 Settimeout: RT=2000 WT=100
11:59:20.67 [TX]: AT+CBC
11:59:20.67 [RX]: AT+CBC
11:59:20.67 [RX]: +CBC: 1, 90
11:59:20.69 [RX]: OK
11:59:20.69 Port 3 wird geschlossen
11:59:20.70 Port 3 wird geöffnet...
11:59:20.72 Einstellungen werden gesetzt (921600, N, 8, 1)
11:59:20.74 Puffer werden gesetzt...(8192)
11:59:20.74 Settimeout: RT=2000 WT=200
11:59:21.24 Port 3 wurde geöffnet !
11:59:21.24 Settimeout: RT=2000 WT=100
11:59:21.24 [TX]: AT+CBC
11:59:21.24 [RX]: AT+CBC
11:59:21.24 [RX]: +CBC: 1, 90
11:59:21.25 [RX]: OK
11:59:21.25 Port 3 wird geschlossen
12:01:29.71 DoItemUpdate
12:01:29.72 DoItemUpdate fertig
12:24:23.36 Terminate Subclass
12:24:23.36 Unload Iconlib
12:24:23.36 Terminate Tray
12:24:23.37 Killing temporary Files
12:24:23.37 Terminate: Calls
12:24:23.39 Terminate: PB
12:24:23.40 Terminate: Notes
12:24:23.42 Terminate: Organizer
12:24:23.44 Terminate: SMS
12:24:23.44 SMS - Datenbank wird gespeichert...
12:24:23.45 ClosePort
12:24:23.45 Form_QueryUnload -> Ende
12:24:23.47 Unload: frmSplash
12:24:23.47 Form_Unload -> Ende |
|
|
|
|
FJ
Site Admin
Anmeldedatum: 15.02.2006
Beiträge: 31497
Wohnort: Tirol
|
Verfasst am:
Mo Jan 08, 2007 08:25 |
|
Its a bug inside the phone, already discussed here |
|
|
|
|
JustinD
Anmeldedatum: 08.01.2007
Beiträge: 9
|
Verfasst am:
Mo Jan 08, 2007 12:35 |
|
Thanks for the response. Just checking - you said it was a bug with the phone but the thread you linked to was for another model - is this right?
Also, in order to fix the problem do I need to also backup the contacts on MyPhoneExplorer and then wipe the phone contacts and reinstall? At least it seemed from the other thread this was the solution.
Also, just curious - do I lose the images associated with the numbers and voice commands through doing the backup and wipe?
thanks for your help.
Justin |
|
|
|
|
FJ
Site Admin
Anmeldedatum: 15.02.2006
Beiträge: 31497
Wohnort: Tirol
|
Verfasst am:
Mo Jan 08, 2007 13:23 |
|
Yes - you'll loose the images.
The other Thread was based on a W850, the K800 has sometimes the same problem. If possible, then make a backup on the MemoryStick. On the K800 you'll find this option inside the phone->contacts->advanged |
|
|
|
|
JustinD
Anmeldedatum: 08.01.2007
Beiträge: 9
|
Verfasst am:
Mo Jan 08, 2007 13:48 |
|
|
|
|
JustinD
Anmeldedatum: 08.01.2007
Beiträge: 9
|
Verfasst am:
Di Jan 09, 2007 01:09 |
|
Update:
I blew away the contacts on my phone after making a backup on MyPhoneExplorer. I was unable to backup the contacts to my memory card - kept on receiving a failure message.
Anyway, I restored the backup to the phone and now its working without issue.
Now I just have to redo the associated contact images and voice commands.
Great software BTW
Justin |
|
|
|
|
The_ZZ
Gast
|
Verfasst am:
Di Jan 23, 2007 16:11 |
|
That would be cool if you provide an ability to select Outlook Express Contacts folder to synchronize contacts with. As for me, I store phone contacts in separate OE folder and don't want to mix 'em with ordinary email contacts.
Thanks in advance. |
|
|
|
|
FJ
Site Admin
Anmeldedatum: 15.02.2006
Beiträge: 31497
Wohnort: Tirol
|
Verfasst am:
Di Jan 23, 2007 17:03 |
|
Please look in the options-dialog for Outlook-Sync - there you can select any folder you want. |
|
|
|
|
Gast
|
Verfasst am:
Di Jan 23, 2007 17:47 |
|
Zitat: | Please look in the options-dialog for Outlook-Sync - there you can select any folder you want. |
Hm. Strange...
My options-dialog looks like shown below and I can't see any of Folder names
PS
I use the latest aviable version of the program. |
|
|
|
|
FJ
Site Admin
Anmeldedatum: 15.02.2006
Beiträge: 31497
Wohnort: Tirol
|
Verfasst am:
Di Jan 23, 2007 18:12 |
|
Oh sorry, i meant Outlook itself - not Outlook Express. Its very hard to get in the folderinformations of OL Express. Up to yet i've found no way to do this. |
|
|
|
|
the_zz
Gast
|
Verfasst am:
Mi Jan 24, 2007 11:35 |
|
May be the following link will help you, if you'll decide to do all that stuff, of course
Good luck!
And thanks for the great program you make! |
|
|
|
|
|
|
Nächstes Thema anzeigen
Vorheriges Thema anzeigen
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|
Powered by phpBB
© 2001, 2002 phpBB Group :: FI Theme ::
Alle Zeiten sind GMT + 1 Stunde
Deutsche Übersetzung von phpBB.de
|