I have been using MPE for ages and always have the most recent version (now: 1.8.0) but I have a problem since this week:
When I run MPE (with PC and Phone bluetooth switched on and connection configured well, SonyEricsson K550i) I have a window "Connecting..." with a message "Initiating connection...", and a message "Reading user data..." in a status bar of the application. (translation of these messages may not be exact - I am using Polish version). Firstly I thought that everything just hung up but sometimes after a 10-15min MPE starts to work, sometimes - not (or I am not waiting enough).
After a few minutes of investigation, I realized that SMSarchive.dat file is a problem (what is strange because a day before it wasn't). MPE hangs while reading this file. Once when MPE fortunately started I managed to export SMS Archive to almost every format (CSV, HTML, XML, TXT and SMS). Then I tried to delete SMSarchive.dat file, start MPE again and import data from one of these files - but MPE hangs while importing or just a second after that.
My SMS Archive have >17 000 records, and weights about 6MB. Every SMS is as a plain text (I mean without any national characters etc.)
Please see the debug.txt (this one is after starting MPE with my original SMS Archive):
Code: Alles auswählen
Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.0
Datum: 2010-11-12
17:06:49.82 Setting Port: 6
17:06:49.82 Setting Baud: 921600
17:06:49.82 Avaiable Ports: COM3=\Device\LSIModem5; COM4=\Device\BtSerial0; COM5=\Device\BtSerial2; COM6=\Device\BtSerial1;
17:06:49.82 Main Load frmSplash
17:06:49.83 Load frmSplash...
17:06:50.44 Hauptfenster wird geladen
17:06:50.76 Sidebar fertig geladen
17:06:51.08 UC SMS wird geladen
17:06:51.15 UC Phonebook wird geladen
17:06:51.21 UC Phonebook fertig geladen
17:06:51.21 UC Calls wird geladen
17:06:51.26 UC Organizer wird geladen
17:06:51.37 Organizer initiated
17:06:51.42 Startpage=2
17:06:51.43 UC Filebrowser wird geladen
17:06:51.54 UC Filebrowser fertig geladen
17:06:51.54 UC AppBrowser wird geladen
17:06:51.56 UC Notes wird geladen
17:06:51.58 UC Calls wird geladen
17:06:51.66 Avaiable Ports: COM3=\Device\LSIModem5; COM4=\Device\BtSerial0; COM5=\Device\BtSerial2; COM6=\Device\BtSerial1;
17:06:51.67 Neue COM-Bibliothek wird verwendet
17:06:51.67 SPort Properties set, opening COM6
17:06:55.26 After OpenPort
17:06:55.26 Settimeout: RT=2000 WT=500
17:06:55.76 Port 6 wurde geöffnet !
17:06:55.76 bOpened=True
17:06:55.77 [TX]: AT+CGSN
17:06:55.91 [RX]: AT+CGSN
17:06:55.91 [RX]: 356657014046962
17:06:55.92 [RX]: OK
17:06:55.92 Settimeout: RT=15000 WT=1000
17:06:55.92 [TX]: ATI
17:06:55.98 [RX]: ATI
17:06:55.98 [RX]: Sony Ericsson K550
17:06:56.00 [RX]: OK
17:06:56.00 [TX]: AT+CSCS="UTF-8"
17:06:56.08 [RX]: AT+CSCS="UTF-8"
17:06:56.08 [RX]: OK
17:06:56.08 [TX]: ATI3
17:06:56.15 [RX]: ATI3
17:06:56.15 [RX]: Sony Ericsson Bluetooth Modem 069
17:06:56.15 [RX]: OK
17:06:56.15 [TX]: AT+CNMI=2,1,0,1
17:06:56.17 [RX]: AT+CNMI=2,1,0,1
17:06:56.17 [RX]: OK
17:06:56.18 [TX]: AT*ECAM=1
17:06:56.28 [RX]: AT*ECAM=1
17:06:56.28 [RX]: OK
17:06:56.28 [TX]: AT+CIND=?
17:06:56.37 [RX]: AT+CIND=?
17:06:56.37 [RX]: +CIND: ("service",(0-1)),("callheld",(0-2)),("call",(0-1)),("callsetup",(0-3)),("signal",(0-5)),("roam",(0-1)),("battchg",(0-5)),("message",(0-1)),("batterywarning",(0-1)),("chargerconnected",(0-1))
17:06:56.38 [RX]: OK
17:06:56.38 [TX]: AT+CBC
17:06:56.40 [RX]: AT+CBC
17:06:56.40 [RX]: +CBC: 0, 37
17:06:56.40 [RX]: OK
17:06:56.41 [TX]: AT+CIND?
17:06:56.43 [RX]: AT+CIND?
17:06:56.43 [RX]: +CIND: 1,0,0,0,4,0,2,0,0,0
17:06:56.43 [RX]: OK
17:06:56.43 Alle Verbindungsaktionen beendet
17:06:56.44 [TX]: AT+CSCA?
17:06:56.47 [RX]: AT+CSCA?
17:06:56.47 [RX]: +CSCA: "+48602951111",145
17:06:56.48 [RX]: OK
17:08:15.10 Lade Userdatenbank: Sony Ericsson K550 [356657014046962]
17:08:15.15 LoadDatafile: Phonebook.dat(29442 Bytes)
17:08:15.39 LoadDatafile: SimPhoneBook.dat(38 Bytes)
17:08:15.40 Kontakte geladen
17:08:15.41 LoadDatafile: Calls.dat(97394 Bytes)
17:08:17.82 Anrufe geladen
17:08:17.86 LoadDatafile: Organizer.dat(6786 Bytes)
17:08:17.88 DoItemUpdate
17:08:17.91 DoItemUpdate fertig
17:08:17.94 Organizer geladen
17:08:17.95 LoadDatafile: Notes.dat(97 Bytes)
17:08:17.95 Notizen geladen
17:08:17.95 Load SMS Data...
17:08:17.96 LoadDatafile: SMS.dat(35424 Bytes)
17:08:17.96 SMS - Datenbank wird geladen...
17:08:18.06 SMS Laden - Readfile: 0 Split: 0 Parse: 109 HandleMultiSMS: 0 Nachrichten: 193
17:08:18.50 LoadDatafile: SMSArchive.dat(6349372 Bytes)
17:08:19.65 SMS Archiv laden - Parse: 1591
17:20:57.64 RefreshList (Archive): Addrows=3978 Sort=753797 MenuUpdate=62 Redraw=16
17:20:57.64 SMS Data Loaded...
17:20:57.64 SMS geladen
17:20:57.72 [TX]: AT+CPROT=0
17:20:57.82 [RX]: AT+CPROT=0
17:20:57.82 [RX]: CONNECT
17:20:57.83 OBEX Connect: 16384 Bytes Paketgröße, Target: Filebrowser
...And here is a fragment of debug after importing my previously exported SMS Archive:
Code: Alles auswählen
17:33:10.34 [RX]: +CIND: 1,0,0,0,4,0,2,1,0,0
17:33:10.37 [RX]: OK
17:33:11.05 SaveDatafile: SMSArchive.dat (5817392 Bytes)
17:33:11.51 Save encrypted (5817400 Bytes)
17:33:11.52 SMS-Archiv gespeichert. BuildArray=624 BuildString=0 SaveFile=468 SMS:17064
17:42:52.01 [RX]: +CDS: 29
17:42:52.01 [RX]: 018006DE0B918488194870F701112171045040011121710470400000000000
17:42:52.02 [TX]: AT+CBC
17:42:52.11 [RX]: AT+CBC